copyright 2020 craigphicks ISC license

TaskSerializer

Outline

The TaskSerializer module can serialize tasks/promises for integrated control - Tasks/promises can be added immediately as they are produced and then be made available to a consumer when they have resolved and the consumer is ready to read them.

Optionally, the number of concurrently running tasks are limited to a user parameter. In that special case, only functions (and their args) may be added, and function will be executed when a space is available. Trying to add promises will throw an Error.

The are 4 different classes exported from the module:

• AsyncIter
• NextSymbol
• WaitAll
• Callbacks

See Essential Information for a discussion of their behavior and differences.

The module is not dependent upon NodeJS, so can be used in browser code.

Usage examples

Note on shared demo functions

To make the examples more readable some shared function are used. They are listed at the end of these examples.

One of those shared functions is the async function producer(). It inputs the tasks by calling install.addTask(...) staggered over time, followed by install.addEnd(). Some of those tasks throw Errors, other resolve normally.

Typescript

Typescript .d.tds files are bundled with the modules. Section Typescript usage examples lists typescript versions of the javascript examples below.

Automatic creation of examples

Both the JS and TS version of the examples can be create by calling

source node_modules/task-serializer/scripts/post-install-demo.sh

from the npm project directory from which npm install task-serializer was called. Two directories demo-js and demo-ts are created, and all the examples are run.

The ts setup has some side effects (e.g., install typescript locally), and to avoid that

source node_modules/task-serializer/scripts/post-install-demo-jsonly.sh

should be called instead.

AsyncIter usage example

API

'use strict';
const {AsyncIter}=require('task-serializer');
const {producer}=require('./demo-lib.js');
async function consumer(ai){
  do{
    try{
      for await(const res of ai){
        console.log('    '+JSON.stringify(res));
      }
      break;
    }catch(e){
      console.log('    '+'error: '+e.message);
    }
  }while(true);
}
async function main(){
  let ai=new AsyncIter({concurrentTaskLimit:2});
  await Promise.all([producer(ai),consumer(ai)]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

NextSymbol usage example

API

'use strict';
const {NextSymbol}=require('task-serializer');
const {makepr,producer}=require('./demo-lib.js');
var somethingElse=makepr();
var iv=setInterval(()=>{somethingElse.resolve("somethingElse");},300);  
async function consumer(ts){
  let emptied=false;
  while(!emptied){
    let next = await Promise.race([
      somethingElse.promise,
      ts.nextSymbol(),
    ]);
    switch(next){
    case "somethingElse":
      console.log(next);
      somethingElse=makepr();// reset
      break;
    case ts.symbolTaskResolved():{
      console.log();
      let res=ts.getTaskResolvedValue();
      console.log("symbolTaskResolved, result="+res);
      break;}
    case ts.symbolTaskRejected():{
      let e=ts.getTaskRejectedValue();
      console.log("symbolTaskRejected, message="+e.message);
      break;}
    case ts.symbolAllRead():{
      console.log("symbolAllRead");
      emptied=true;
      clearInterval(iv);
      break;}
    }
  }
}
async function main(){
  let ts=new NextSymbol({concurrentTaskLimit:2});
  await Promise.all([consumer(ts),producer(ts)]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure: '+e.message);});

WaitAll usage examples

API

'use strict';
const {WaitAll}=require('task-serializer');
const {producer}=require('./demo-lib.js');
async function consumer_waitAll(ts){
  try{
    let r=await ts.waitAll();
    console.log(`ts.waitAll() returned`);
    console.log(JSON.stringify(r,0,2));
  }catch(e){
    console.log(`ts.waitAll() caught ${e.message}`);
  }
}
async function consumer_waitAllSettled(ts){
  let r=await ts.waitAllSettled();
  console.log(`ts.waitAllSettled() returned`);
  console.log(JSON.stringify(r,0,2));
  console.log('consumer finished');
}
async function main(){
  let waitAll=new WaitAll({concurrentTaskLimit:2});
  await Promise.all([
    consumer_waitAll(waitAll),
    producer(waitAll),
  ]);
  waitAll=new WaitAll({concurrentTaskLimit:2});
  await Promise.all([
    consumer_waitAllSettled(waitAll),
    producer(waitAll),
  ]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

Callbacks usage example

API

'use strict';
const {Callbacks}=require('task-serializer');
const {producer}=require('./demo-lib.js');
async function consumer(ts){
  await new Promise((resolve)=>{
    ts.onTaskResolved((resolvedValue)=>{
      console.log(`onTaskResolved ${resolvedValue}`);
    });
    ts.onTaskRejected((rejectedValue)=>{
      console.log(`onTaskRejected ${rejectedValue}`);
    });
    ts.onEmpty(()=>{
      console.log(`onEmpty`);
      resolve();
    });
  });
  console.log('consumer finished');
}
async function main(){
  let ts=new Callbacks({concurrentTaskLimit:2});
  await Promise.all([
    consumer(ts),// consumer must initialize first
    producer(ts)
  ]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

demo-lib.js

'use strict';
var {AsyncIter,NextSymbol}=require('task-serializer');
function snooze(ms){return new Promise(r=>setTimeout(r,ms));}
function range(len){return [...Array(len).keys()];}
function makepr(){
  let pr={};
  pr.promise=new Promise((r)=>{pr.resolve=r;});
  return pr;
}
function logStatus(ts){
  let wa=ts.getCountWaiting();
  let wo=ts.getCountWorking();
  let rest=ts.getCountResolvedTotal();
  let rejt=ts.getCountRejectedTotal();
  let fint=ts.getCountFinishedTotal();
  console.log(
    `wa:${wa},wo:${wo},rest:${rest},rejt:${rejt},fint:${fint}`);
  if ((ts instanceof AsyncIter)||(ts instanceof NextSymbol)){
    let resnr=ts.getCountResolvedNotRead();
    let rejnr=ts.getCountRejectedNotRead();
    console.log(`resnr:${resnr},rejnr:${rejnr}`);
  }
}
async function task(id,ms,err=false){
  console.log(`-->enter ${id}`);
  if (err)
    throw new Error(`task failed id=${id}`);
  await snooze(ms);
  console.log(`<--leave ${id}`);
  return `task ${id}, took ${ms}ms`;
}
async function producer(ts){
  for (let i=0; i<6; i++){
    ts.addTask(task,i,2**(10-i),(i+1)%3==0);
    await snooze(100);
  }
  ts.addEnd();
  console.log('producer finished');
}
module.exports.snooze=snooze;
module.exports.task=task;
module.exports.range=range;
module.exports.makepr=makepr;
module.exports.producer=producer;

Esential Information

Classes share common input functions

Each of the classes includes these input functions:

• addTask(func,...args)/addTask(promise) to add tasks/promises.
• addEnd() to indicate that no more tasks/promises will be added, thus allowing exit after the pipeline has drained.

Classes have differing output functions and behavior

The output interface of each of those classes differ, and are suitable for different usage cases. The following table compares some properties of those classes to help decide which is suitable for a given usage case:

| property |AsyncIter|NextSymbol|WaitAll|Callbacks| |-- |-- |-- |-- |-- | | read buffered | yes | yes | yes | no | | continuous vs. batch |cont | cont | batch | cont | | control loop | yes | yes | no | no | | select style | no | yes | N/A | N/A | ||||||

where 'property' are as follows:

• 'read buffered':
  • Whether the class has an internal buffer storing the outcomes of finished tasks/promises until they are read by the consumer.
• 'continuous vs. batch':
  • Batch indicates either:
    • no consumer read until all tasks/promises have resolved, or until any tak/poromise has rejected (WaitAll.waitAll)
    • no consumer read until all tasks/promises have either resolved or rejected (WaitAll.waitAllSettled)
  • Continous indicates the internal read buffer is intended to be read by consumers before all taks/promises have resolved/rejected.
• 'control loop'
  • The output may be easily read in an asynchrous control loop
• 'select style'
  • The control loop condition informs an output is 'ready' without actually reading it. This style is useful for a top level control loop integrating 'ready' conditions from many unrelated sources. (See NextSymbol usage example.)

Resolve/Reject handling

All rejected tasks/promises are managed so that they don't throw unhandled rejections.

Read-buffered classes prioritize rejected-values over resolved-values, and pass the rejected-values first whenever both are availabe. The exception to this rule is WaitAll.waitAllSettled(), which transforms rejected-values into resolved-values.

Terminology

• Each task/promise after being added will go through all of the following milestones in order:

  • added
    • The task has been added with addTask.
  • started
    • If the construtor parameter concurrentTaskLimit>0, then a task may be forced to wait before start.
    • If the construtor parameter concurrentTaskLimit<=0, that all task/promises are (considered) started when added.
  • finished
    • Task/promise has reached an outcome, either one of the following two categories:
      • resolved-value
        • resulting from resolve(<resolved-value>) or return <resolved-value>
      • rejected-value
        • resulting from ``reject()orthrow `
        • The actual values are determined by the task/promise, not by the TaskSerializer module. A rejected-value typically satisfies (<rejected-value> instanceof Error), but that is not mandatory.
  • read
    • This milestone is seperate from finished only in the read-buffered classes AsyncIter,NextSymbol, and WaitAll. In the case of class Callbacks, one of the onTaskResolved/onTaskRejected callbacks is called immediately when finished is reached, so read and finished are reached simultaneously.
    • Task/promise outcome has been read by the consumer.

• The class instance passes through the following milestones, in order:

  • started-processing
    • First task/promise has been added.
  • ended
    • addEnd has been called to guarantee no more tasks/promises will be added.
  • all-finished
    • addEnd has been called and all added tasks/promises have reached finished.
  • all-read
    • This milestone is seperate from all-finished only for the read-buffered classes AsyncIter, NextSymbol, and WaitAll. In the case of Callbacks, one of the callbacks onResolved/onRejected will be called immediately upon reaching finished.

Termination

There is no active termination method. The TaskSerializer class instances always wait for added tasks to reach finished. Therefore, if the task deadlocks or runs forever, the class instance does not terminate.

APIs

API shared by all classes

• instance=new <Classname>({concurrentTaskLimit=0}={})
  • where <Classname> is one of AsyncIter,Callbacks,NextSymbol,or WaitAll.
  • concurrentTaskLimit is the integer number of task allowed to run concurrently, unless it is <=0, in which case their is no limit.
• instance.addTask(func,...args) where (func instanceof Function), or addTask(promise) where (promise instanceof Promise)
  • in the case of constructor arg concurrentTaskLimit>0,
    • addTask will allow only the first form, and passing a promise will throw.
    • func(...args) will be called in the order passed, when the concurrent task limit constraint allows.
  • in the case of constructor arg concurrentTaskLimit<=0, either form is allowed.
  • in either case, the tasks/promises are managed by the instance of <Classname> until reaching miletone read. The tasks/promises may reject, and those rejections are handled to prevent unhandled promise rejections.
• instance.addEnd()
  • this a guarantee from the caller that addTask will not be called again. It is required so the instance knows that when all tasks/promises have reached the finished milestone, the instance has reached the finished-processing milestone.

The following are informational functions common to all the classes.

• instance.getCountWaiting()
  • When the construct arg concurrentTaskLimit<=0, always returns 0.
  • Otherwise, returns the number of tasks added but not yet started.
• instance.getCountWorking()
  • Returns the number of tasks/promises started but not yet finished.
• instance.getCountResolvedTotal()
  • Returns the number of tasks/promises finished with a resolved-value
• instance.getCountRejectedTotal()
  • Returns the number of tasks/promises finished with a rejected-value
• instance.getCountFinishedTotal()
  • Returns the sum of instance.getCountResolvedTotal() and instance.getCountRejectedTotal()

The following are informational functions available only in the read-buffered classes AsyncIter and NextSymbol:

• instance.getCountResolvedNotRead()
  • Returns the number of tasks/promises finished with a resolved-value, but which are not yet read
• instance.getCountRejectedNotRead()
  • Returns the number of tasks/promises finished with a rejected-value, but which are not yet read
• instance.getCountFinishedNotRead()
  • Returns the sum of instance.getCountResolvedNotRead() and instance.getCountRejectedNotRead()

AsyncIter only API

• see AsyncIter usage example for example.
• const {AsyncIter}=require('task-serializer')
• AsyncIter.constructor({concurrentTaskLimit=0}={})
• AsyncIter.constructor(concurrentTaskLimit=0)
  • Either form of constructor (named/unnamed param) are allowed..
  • See API shared by all classes.
• explicit async instance.next() or implicit async for await (iter of instance)
  • There are 3 possible outcome categories: resolved-value, rejected-value, and all-read, where all-read indicates that the instance has reached the all-read milestone.
  • case: explicit
    • case: resolved-value
      • returns {done:false,value:<resolved-value>}
    • case: rejected-value
      • throws <rejected-value>
    • case: all-read
      • returns {done:true}
  • case: implicit
    • case: resolved-value
      • iter will be the <resolved-value>
    • case: rejected-value
      • throws <rejected-value>
    • case: all-read
      • breaks from loop.

NextSymbol only API

• see NextSymbol usage example for example.
• const {NextSymbol}=require('task-serializer')
• NextSymbol.constructor({concurrentTaskLimit=0}={})
• NextSymbol.constructor(concurrentTaskLimit=0)
  • Either form of constructor (named/unnamed param) are allowed..
  • See API shared by all classes.
• async instance.nextSymbol() Returns a value strictly equal to one of instance.symbolTaskResolved(), instance.symbolTaskRejected(), or instance.symbolAllRead().
  • case instance.symbolTaskResolved(): indicates a task/promise resolved-value is ready to be read.
  • case instance.symbolTaskRejected(): indicates a task/promise rejected-value is ready to be read.
  • case instance.symbolAllRead(): indicates the instance milestone all-read has been reached.
• instance.getTaskResolvedValue()
  • This is a sync function intended to be called immediately after async instance.nextSymbol() has returned a value equal to instance.symbolTaskResolved()
  • It returns the next resolved-value of some task/promise.
• instance.getTaskRejectedValue()
  • This is a sync function intended to be called immediately after async instance.nextSymbol() has returned a value equal to instance.symbolTaskRejected()
  • It returns the next rejected-value of some task/promise.

WaitAll only API

• see WaitAll usage examples for example.
• const {WaitAll}=require('task-serializer')
• WaitAll.constructor({concurrentTaskLimit=0}={})
• WaitAll.constructor(concurrentTaskLimit=0)
  • Either form of constructor (named/unnamed param) are allowed..
  • See API shared by all classes.
• async instance.waitAll()
  • There is no timing constraint on calling waitAll, i.e. no requirement to call before after any instance milestone, although obviously milestone empty is not reached until waitAll is called.
  • If any tasks/promises have terminated with an error before the call to addTask, then that first one will be returned immediately when waitAll is called.
  • If any tasks/promises have terminated with an error after addTask is called, waitAll will immediately return with that error.
  • Otherise waitAll will not return before all the tasks/promises added with addTask have terminated, and the array of resolved-values will be the order they were added, not the order they were resolved.
• async instance.waitAllSettled()
  • There is no timing constraint on calling waitAllSettled(). Any time from before the first addTask to after all tasks/promises have terminated (i.e., end-of-processing) is allowed. Measures have been taken to prevent unhandled rejections.
  • waitAllSettled will return no sooner than end-of-processing. It will return the same value as Promise.waitAllSettled() would return on an array of all tasks/promises added via addTask in the order the were added.

Callbacks only API

• see Callbacks usage example for example.
• const {Callbacks}=require('task-serializer')
• Callbacks.constructor({concurrentTaskLimit=0}={})
• Callbacks.constructor(concurrentTaskLimit=0)
  • Either form of constructor (named/unnamed param) are allowed..
  • See API shared by all classes.
• instance.onTaskResolved(callback)
  • add the unique callback to be called every time a task/promise resolved-result is ready
• instance.onTaskRejected(callback)
  • add the unique callback to be called every time a task/promise rejected-result is ready
• instance.onEmpty(callback)
  • add the unique callback to be called when the instance reaches the empty milestone.
• NOTES:
  • Each instance.on<*> function should be called only once per instance. Only one callback per function is actually registered.
  • Each instance.on<*>function must be called before the instance has reached the processing milestone, i.e., before the first call to addTask.

Typescript usage examples

AsyncIter usage example (typescript)

import {AsyncIter} from 'task-serializer'
import {producer} from './demo-lib';
async function consumer(ai: AsyncIter){
  do{
    try{
      for await(const res of ai){
        console.log('    '+JSON.stringify(res));
      }
      break;
    }catch(e){
      console.log('    '+'error: '+e.message);
    }
  }while(true);
}
async function main(){
  let ai=new AsyncIter({concurrentTaskLimit:2});
  await Promise.all([producer(ai),consumer(ai)]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

NextSymbol usage example (typescript)

import {NextSymbol} from 'task-serializer';
import {makepr,producer} from './demo-lib.js';
var somethingElse=makepr();
var iv=setInterval(()=>{somethingElse.resolve("somethingElse");},300);  
async function consumer(ts: NextSymbol){
  let emptied=false;
  while(!emptied){
    let next = await Promise.race([
      somethingElse.promise,
      ts.nextSymbol(),
    ]);
    switch(next){
    case "somethingElse":
      console.log(next);
      somethingElse=makepr();// reset
      break;
    case ts.symbolTaskResolved():{
      console.log();
      let res=ts.getTaskResolvedValue();
      console.log("symbolTaskResolved, result="+res);
      break;}
    case ts.symbolTaskRejected():{
      let e=ts.getTaskRejectedValue();
      console.log("symbolTaskRejected, message="+e.message);
      break;}
    case ts.symbolAllRead():{
      console.log("symbolAllRead");
      emptied=true;
      clearInterval(iv);
      break;}
    }
  }
}
async function main(){
  let ts=new NextSymbol({concurrentTaskLimit:2});
  await Promise.all([consumer(ts),producer(ts)]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

Callbacks usage example (typescript)

import {Callbacks} from 'task-serializer';
const {producer} from './demo-lib.js';
async function consumer(ts: Callbacks){
  await new Promise<void>((resolve)=>{
    ts.onTaskResolved((resolvedValue:any)=>{
      console.log(`onTaskResolved ${resolvedValue}`);
    });
    ts.onTaskRejected((rejectedValue)=>{
      console.log(`onTaskRejected ${rejectedValue}`);
    });
    ts.onEmpty(()=>{
      console.log(`onEmpty`);
      resolve();
    });
  });
  console.log('consumer finished');
}
async function main(){
  let ts=new Callbacks({concurrentTaskLimit:2});
  await Promise.all([
    consumer(ts),// consumer must initialize first
    producer(ts)
  ]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

WaitAll usage example (typescript)

import {WaitAll} from 'task-serializer';
import {producer} from './demo-lib.js';
async function consumer_waitAll(ts: WaitAll){
  try{
    let r=await ts.waitAll();
    console.log(`ts.waitAll() returned`);
    console.log(JSON.stringify(r,null,2));
  }catch(e){
    console.log(`ts.waitAll() caught ${e.message}`);
  }
}
async function consumer_waitAllSettled(ts: WaitAll){
  let r=await ts.waitAllSettled();
  console.log(`ts.waitAllSettled() returned`);
  console.log(JSON.stringify(r,null,2));
  console.log('consumer finished');
}
async function main(){
  let waitAll=new WaitAll({concurrentTaskLimit:2});
  await Promise.all([
    consumer_waitAll(waitAll),
    producer(waitAll),
  ]);
  waitAll=new WaitAll({concurrentTaskLimit:2});
  await Promise.all([
    consumer_waitAllSettled(waitAll),
    producer(waitAll),
  ]);
}
main()
  .then(()=>{console.log('success');})
  .catch((e)=>{console.log('failure '+e.message);});

History

• 2.1.0
  • typescript interface provided (source also typescript)
  • fixed incorrect parameters in example code