sx127x
v0.0.0
Published
Node.js driver for Semtech SX1276/77/78/79 based LoRa radios
Downloads
12
Maintainers
Readme
node-sx127x
Node.js driver for Semtech SX1276/77/78/79 based LoRa radios.
Requires a Linux computer with SPI hardware, like a Raspberry Pi.
Built on top of @fivdi's onoff and spi-device modules.
Prerequisites
- Linux computer with SPI hardware
- Node.js installed
- SPI driver installed and enabled
Hardware Wiring
| Semtech SX1276/77/78/79 | Generic Linux | Raspberry Pi | | :---------------------: | :-----------: | :----------: | | VCC | 3.3V | 3.3V | | GND | GND | GND | | SCK | SCK | SCK (pin 11) | | MISO | MISO | MISO (pin 10) | | MOSI | MOSI | MOSI (pin 9) | | NSS | Chip enable/select | CS0 (pin 8) or CS1 (pin 7) | | NRESET | GPIO pin | GPIO pin | | DIO0 | GPIO pin | GPIO pin |
Installation
npm install sx127x
API
See API.md.
Examples
See examples folder.
License
This libary is licensed under the MIT Licence.