react-native-tvos
v0.76.1-0
Published
A framework for building native apps using React
Downloads
96,888
Readme
react-native-tvos
Apple TV and Android TV support for React Native are maintained here and in the corresponding react-native-tvos
NPM package, and not in the core repo. This is a full fork of the main repository, with only the changes needed to support Apple TV and Android TV.
Releases of react-native-tvos
will be based on a public release of react-native
; e.g. the 0.76.0-0 release of this package will be derived from the 0.76.0 release of react-native
. All releases of this repo will follow the 0.xx.x-y format, where x digits are from a specific RN core release, and y represents the additional versioning from this repo.
Releases will be published on npmjs.org and you may find the latest release version here: https://www.npmjs.com/package/react-native-tvos?activeTab=versions or use the tag @latest
You will find the relevant tvOS support and maintenance within the branches marked tvos-v0.xx.x
;
To build your project for Apple TV, you should change your package.json
imports to import react-native
as follows, so that this package is used instead of the core react-native package.
"react-native": "npm:react-native-tvos@latest",
You cannot use this package and the core react-native package simultaneously in a project.
This README covers only TV-specific features. For more general documentation and for changes between versions, you should also see these resources:
- React Native documentation: https://reactnative.dev
- The React Native changelog: https://github.com/facebook/react-native/blob/main/CHANGELOG.md
Hermes JS support
- As of the 0.71 release, Hermes is fully working on both Apple TV and Android TV, and is enabled by default.
React Native new architecture (Fabric) support
React Native TV 0.76 enables the New Architecture by default. You can read more about it in this blog post from the RN core team: The New Architecture Is Here
If, for any reason, the New Architecture is not behaving properly in your application, there is always the option to opt-out from it until you are ready to turn it on again.
To opt-out from the New Architecture:
Expo apps: RN 0.76 will be supported in SDK 52. See the SDK 52 beta release notes for more information on new arch support in Expo.
Apple TV: You can reinstall the dependencies by running the command:
RCT_NEW_ARCH_ENABLED=0 bundle exec pod install
- Android TV: On Android, modify the android/gradle.properties file and turn off the newArchEnabled flag, then do a clean rebuild:
-newArchEnabled=true
+newArchEnabled=false
Typescript
Typescript types for TV-specific components and APIs have been added to types/public
.
General support for TV
TV device support has been implemented with the intention of making existing React Native applications "just work" on TV, with few or no changes needed in the JavaScript code for the applications.
The RNTester app supports Apple TV and Android TV. In this repo, RNTester/Podfile
and RNTester/RNTesterPods.xcodeproj
have been modified to work for tvOS.
Minimum operating system versions:
- Apple TV:
- tvOS 13.4 (for the 0.74 and 0.75 releases)
- tvOS 15.1 (for the 0.76 release)
- Android TV:
- API level 23 (for the 0.74 and 0.75 releases)
- API level 24 (for the 0.76 release)
Build changes
- Native layer for Apple TV: Changes in the React Native podspecs (in 0.73 and later) require that your application
Podfile
only have one target. This repo supports either an iOS target or a tvOS target. - Maven artifacts for Android TV: In 0.71 and later releases, the React Native Android prebuilt archives are published to Maven instead of being included in the NPM. We are following the same model, except that the Maven artifacts will be in group
io.github.react-native-tvos
instead ofcom.facebook.react
. The@react-native/gradle-plugin
module has been upgraded so that the Android dependencies will be detected correctly during build.
TV project creation in React Native 0.75 and later
Warning: Make sure you do not globally install
react-native
orreact-native-tvos
. If you have done this the wrong way, you may get error messages likeld: library not found for -lPods-TestApp-tvOS
.
We strongly recommend Yarn as the package manager.
Using the Expo SDK with TV apps
As of React Native version 0.75.x, the core team recommends Expo for new projects.
See the Building Expo apps for TV guide from Expo for details on how to set up a new Expo project, including supported Expo modules and limitations.
Using Expo's continuous native generation (CNG) model, projects created this way can be used to build either mobile or TV apps, taking advantage of the full support for both mobile and TV platforms in this repo.
Project creation using the React Native Community CLI
As of React Native 0.75.x, the template that used to reside in the react-native
core package has been moved to a new community repo and will be maintained there. To support developers that wish to continue using the community CLI, we have created a new TV template repository and will maintain a TV port of this template.
Note: The new TV template will only build apps for Apple TV and Android TV. Multiple platform targets are no longer supported in React Native app Podfiles.
To create a new project for RNTV 0.76:
#
# Init an app called 'TVTest', note that you must not be in a node module (directory with node_modules sub-directory) for this to work
$ npx @react-native-community/cli@latest init TVTest --template @react-native-tvos/template-tv
###### ######
### #### #### ###
## ### ### ##
## #### ##
## #### ##
## ## ## ##
## ### ### ##
## ######################## ##
###### ### ### ######
### ## ## ## ## ###
### ## ### #### ### ## ###
## #### ######## #### ##
## ### ########## ### ##
## #### ######## #### ##
### ## ### #### ### ## ###
### ## ## ## ## ###
###### ### ### ######
## ######################## ##
## ### ### ##
## ## ## ##
## #### ##
## #### ##
## ### ### ##
### #### #### ###
###### ######
Welcome to React Native 0.76!
Learn once, write anywhere
✔ Downloading template
✔ Copying template
✔ Processing template
✔ Installing dependencies
✔ Do you want to install CocoaPods now? Only needed if you run your project in Xcode directly … yes
✔ Installing Ruby Gems
✔ Installing CocoaPods dependencies (this may take a few minutes)
.
.
.
$ cd TVTest
# Now build and start the app in the tvOS Simulator - this will only work on a macOS machine.
npx react-native run-ios --simulator "Apple TV"
# This command builds and starts the app in an Android TV emulator (needs to be created in advance).
npx react-native run:android --device tv_api_31
How to support TV specific file extensions
The template contains an example Metro configuration that allows Metro to resolve application source files with TV-specific code, indicated by specific file extensions (e.g. *.ios.tv.tsx
, *.android.tv.tsx
, *.tv.tsx
). The config will work the same way with the other standard source file extensions (.js
, etc.), as documented in Metro docs
When this is enabled, Metro will resolve files in the following order of preference (and similarly for the other supported file extensions):
file.ios.tv.tsx
orfile.android.tv.tsx
file.tv.tsx
file.ios.tsx
orfile.android.tsx
file.tsx
This config is not enabled by default, since it will impact bundling performance, but is available for developers who need this capability.
Code changes
- JavaScript layer: Support for TV has been added to the
Platform
React Native API.
var Platform = require('Platform');
var running_on_tv = Platform.isTV;
// If you want to be more specific and only detect devices running tvOS
// (but no Android TV devices) you can use:
var running_on_apple_tv = Platform.isTVOS;
Common codebase for iOS and tvOS: Since tvOS and iOS share most Objective-C and JavaScript code in common, most documentation for iOS applies equally to tvOS. Apple TV specific changes in native code are all wrapped by the TARGET_OS_TV define. These include changes to suppress APIs that are not supported on tvOS (e.g. web views, sliders, switches, status bar, etc.), and changes to support user input from the TV remote or keyboard.
Common codebase for Android phone and Android TV: Apps built for Android using this repo will run on both Android phone and Android TV. Most of the changes for TV are specific to handling focus-based navigation on a TV using the D-Pad on the remote control.
Access to touchable controls: The
Touchable
mixin has code added to detect focus changes and use existing methods to style the components properly and initiate the proper actions when the view is selected using the TV remote, soTouchableWithoutFeedback
,TouchableHighlight
andTouchableOpacity
will "just work" on both Apple TV and Android TV. In particular:onFocus()
will be executed when the touchable view goes into focusonBlur()
will be executed when the touchable view goes out of focusonPress()
will be executed when the touchable view is actually selected by pressing the "select" button on the TV remote (center button on Apple TV remote, or center button on Android TV DPad).onLongPress()
will be executed twice if the "select" button is held down for a length of time. The two events passed intoonLongPress()
will have different values for theireventKeyAction
property, 0 for key down (start) and 1 for key up (end).
Pressable controls: The
Pressable
API works with TV. AdditionalonFocus
andonBlur
props are provided to allow you to customize behavior when a Pressable enters or leaves focus. Similar to thepressed
state that is true while a user is pressing the component on a touchscreen, thefocused
state will be true when it is focused on TV.PressableExample
in RNTester has been modified appropriately. TheonPress()
andonLongPress()
methods work the same way as withTouchable
components.Tailwind styles for Pressable controls: For the 0.76 release, the
Pressable
component also generates theonPressIn()
andonPressOut()
events needed to support theactive:
pseudo class for Tailwind styles.- For
onPress()
events (the "select" button on the remote is pressed once),onPressIn()
is generated, thenonPressOut()
is generated a short time later. - For
onLongPress()
events (the "select" button on the remote is held down for a length of time),onPressIn()
is generated once the press down is detected, andonPressOut()
is generated when the button is released. - The
focus:
pseudo class is also supported via theonFocus()
andonBlur()
events.
- For
TV remote/keyboard input: Application code that needs to implement custom handling of TV remote events can create an instance of
TVEventHandler
and listen for these events. For a more convenient API, we provideuseTVEventHandler
.
import { TVEventHandler, useTVEventHandler } from 'react-native';
// Functional component
const TVEventHandlerView: () => React.Node = () => {
const [lastEventType, setLastEventType] = React.useState('');
const myTVEventHandler = evt => {
setLastEventType(evt.eventType);
};
useTVEventHandler(myTVEventHandler);
return (
<View>
<TouchableOpacity onPress={() => {}}>
<Text>
This example enables an instance of TVEventHandler to show the last
event detected from the Apple TV Siri remote or from a keyboard.
</Text>
</TouchableOpacity>
<Text style={{color: 'blue'}}>{lastEventType}</Text>
</View>
);
};
// Class based component
class Game2048 extends React.Component {
_tvEventHandlerSubscription: EventSubscription || undefined;
_enableTVEventHandler() {
this._tvEventHandlerSubscription = TVEventHandler.addListener(function(evt) {
if (evt && evt.eventType === 'right') {
cmp.setState({board: cmp.state.board.move(2)});
} else if(evt && evt.eventType === 'up') {
cmp.setState({board: cmp.state.board.move(1)});
} else if(evt && evt.eventType === 'left') {
cmp.setState({board: cmp.state.board.move(0)});
} else if(evt && evt.eventType === 'down') {
cmp.setState({board: cmp.state.board.move(3)});
} else if(evt && evt.eventType === 'playPause') {
cmp.restartGame();
}
});
}
_disableTVEventHandler() {
if (this._tvEventHandlerSubscription) {
this._tvEventHandlerSubscription.remove();
delete this._tvEventHandlerSubscription;
}
}
componentDidMount() {
this._enableTVEventHandler();
}
componentWillUnmount() {
this._disableTVEventHandler();
}
LogBox: The LogBox error/warning display (which replaced YellowBox in 0.63) is working as expected on TV platforms, after a few adjustments to make the controls accessible to the focus engine.
Dev Menu support: On the Apple TV simulator, cmd-D will bring up the developer menu, just like on iOS. To bring it up on a real Apple TV device, make a long press on the play/pause button on the remote. (Please do not shake the Apple TV device, that will not work :) ). Android TV dev menu behavior is the same as on Android phone.
TV remote animations on Apple TV:
RCTTVView
native code implements Apple-recommended parallax animations to help guide the eye as the user navigates through views. The animations can be disabled or adjusted with new optional view properties.Back navigation with the TV remote menu button: The
BackHandler
component, originally written to support the Android back button, now also supports back navigation on the Apple TV using the menu button or '<' button on the Apple TV remote, and the back button as usual on Android TV remote.TVEventControl for AppleTV: (Formerly "TVMenuControl") This module provides methods to enable and disable features on the Apple TV Siri remote:
enableTVMenuKey
/disableTVMenuKey
: Method to enable and disable the menu key gesture recognizer, in order to fix an issue with Apple's guidelines for menu key navigation (see https://github.com/facebook/react-native/issues/18930). TheRNTester
app uses these methods to implement correct menu key behavior for back navigation.enableTVPanGesture
/disableTVPanGesture
: Methods to enable and disable detection of finger touches that pan across the touch surface of the Siri remote. SeeTVEventHandlerExample
in theRNTester
app for a demo.enableGestureHandlersCancelTouches
/disableGestureHandlersCancelTouches
: Methods to turn on and turn off cancellation of touches by the gesture handlers inRCTTVRemoteHandler
(see #366). Cancellation of touches is turned on (enabled) by default in 0.69 and earlier releases.
Accessibility: We have an additional
accessibilityFocus
accessibility action on Android that you can use for detecting focus changes on every accessible element (like a regularText
) whenTalkBack
is enabled.TVFocusGuideView: This component provides support for Apple's
UIFocusGuide
API and is implemented in the same way for Android TV, to help ensure that focusable controls can be navigated to, even if they are not directly in line with other controls. An example is provided inRNTester
that shows two different ways of using this component.| Prop | Value | Description | |---|---|---| | destinations | any[]? | Array of
Component
s to register as destinations of the FocusGuideView | | autoFocus | boolean? | If true,TVFocusGuide
will automatically manage focus for you. It will redirect the focus to the first focusable child on the first visit. It also remembers the last focused child and redirects the focus to it on the subsequent visits.destinations
prop takes precedence over this prop when used together. | | focusable | boolean? | When set to false, this view and all its subviews will be NOT focusable. | | trapFocus* (Up, Down, Left, Right) | Prevents focus escaping from the container for the given directions. |More information on the focus handling improvements above can be found in this article.
Next Focus Direction: the props
nextFocus*
onView
should work as expected on iOS too (previously android only). One caveat is that if there is no focusable in thenextFocusable*
direction next to the starting view, iOS doesn't check if we want to override the destination.TVTextScrollView: On Apple TV, a ScrollView will not scroll unless there are focusable items inside it or above/below it. This component wraps ScrollView and uses tvOS-specific native code to allow scrolling using swipe gestures from the remote control.
VirtualizedList: We extend
VirtualizedList
to make virtualization work well with focus management in mind. All of the improvements that we made are automatically available to all the VirtualizedList based components such asFlatList
.- Defaults: VirtualizeList contents are automatically wrapped with a
TVFocusGuideView
withtrapFocus*
properties enabled depending on the orientation of the list. This default makes sure that focus doesn't leave the list accidentally due to a virtualization issue etc. until reaching the beginning or the end of the list. - New Props:
- Defaults: VirtualizeList contents are automatically wrapped with a
| Prop | Value | Description | |---|---|---| | additionalRenderRegions | {first: number; last: number;}[]? | Array of
RenderRegions
that allows you to define regions in the list that are not subject to virtualization, ensuring they are always rendered. This is particularly useful for preventing blank areas in critical parts of the list. These regions are rendered lazily after the initial render and are specified as an array of objects, each withfirst
andlast
indices marking the beginning and end of the non-virtualized region based on index. See the feature proposal for more context. |