React Native Mapbox Navigation

Smart Mapbox turn-by-turn routing based on real-time traffic for React Native. A navigation UI ready to drop into your React Native application.

Features

• A full-fledged turn-by-turn navigation UI for iPhone, iPad, and CarPlay that’s ready to drop into your application
• Professionally designed map styles for daytime and nighttime driving
• Worldwide driving, cycling, and walking directions powered by open data and user feedback
• Traffic avoidance and proactive rerouting based on current conditions in over 55 countries
• Natural-sounding turn instructions powered by Amazon Polly (no configuration needed)
• Support for over two dozen languages

Installation Requirements

Before installing the SDK, you will need to gather the appropriate credentials. The SDK requires two pieces of sensitive information from your Mapbox account. If you don't have a Mapbox account: sign up and navigate to your Account page. You'll need:

• A public access token: From your account's tokens page, you can either copy your default public token or click the Create a token button to create a new public token.
• A secret access token with the Downloads:Read scope.

1. From your account's tokens page, click the Create a token button.
2. From the token creation page, give your token a name and make sure the box next to the Downloads:Read scope is checked.
3. Click the Create token button at the bottom of the page to create your token.
4. The token you've created is a secret token, which means you will only have one opportunity to copy it somewhere secure.

Installation

npm install @harshpatel2125/react-native-mapbox-navigation

Read the iOS specific instructions below before running pod install.

iOS Specific Instructions

Make sure your react native project has an Objective-C bridging header for swift. If you don't have a bridging header you can follow these steps here below in the dropdown.

1. From Xcode, go to: File → New → File…
2. Select Swift File
3. Name your file Dummy or whatever you want
4. In the Group dropdown, make sure to select the group folder for your app, not the project itself.

After you create the Swift file, you should be prompted to choose if you want to configure an Objective-C Bridging Header. Select “Create Bridging Header”.

This file is usually named YourProject-Bridging-Header.h. Don’t change this name manually, because Xcode configures the project with this exact filename.

There are a few build settings in Xcode that are necessary. Make sure to set Don't Dead-strip Inits and Terms to YES and Dead Code Stripping to YES for all projects/targets.

You will also need to remove the entry "$(TOOLCHAIN_DIR)/usr/lib/swift-5.0/$(PLATFORM_NAME)" from Library Search Paths if it is present for your project target -

Place your public token in your Xcode project's Info.plist and add a MGLMapboxAccessToken key whose value is your public access token.

Add the UIBackgroundModes key to Info.plist with audio and location if it is not already present. This will allow your app to deliver audible instructions while it is in the background or the device is locked.

<key>UIBackgroundModes</key>
<array>
  <string>audio</string>
  <string>location</string>
</array>

Place your secret token in a .netrc file in your OS home directory that contains this:

machine api.mapbox.com
login mapbox
password <INSERT SECRET TOKEN>

Add the following to your ios podfile -

  pre_install do |installer|
    $RNMBNAV.pre_install(installer)
    # any other pre install hooks here
  end

  post_install do |installer|
    $RNMBNAV.post_install(installer)
    # any other post install hooks here
  end

require_relative '../node_modules/react-native/scripts/react_native_pods'
require_relative '../node_modules/@react-native-community/cli-platform-ios/native_modules'

platform :ios, '10.0'
install! 'cocoapods', :disable_input_output_paths => true

target 'AwesomeProject' do
  config = use_native_modules!

  use_react_native!(:path => config["reactNativePath"])

  target 'AwesomeProjectTests' do
    inherit! :complete
    # Pods for testing
  end

  pre_install do |installer|
    $RNMBNAV.pre_install(installer)
  end

  # Enables Flipper.
  #
  # Note that if you have use_frameworks! enabled, Flipper will not work and
  # you should disable these next few lines.
  use_flipper!
  post_install do |installer|
    flipper_post_install(installer)
    $RNMBNAV.post_install(installer)
  end
end

target 'AwesomeProject-tvOS' do
  # Pods for AwesomeProject-tvOS

  target 'AwesomeProject-tvOSTests' do
    inherit! :search_paths
    # Pods for testing
  end
end

Now you are ready to install the cocoapod:

cd ios && pod install

If you are experiencing a "multiple commands produce" build error in your Xcode project then you will need to add this entry below to the top of your ios podfile:

install! 'cocoapods', :disable_input_output_paths => true

If you are having an issue with your archive not showing up in organizer after archiving then you will need to open ios/Pods/Target Support Files/@react-native-mapbox-gl-mapbox-static/@react-native-mapbox-gl-mapbox-static-copy-dsyms.sh and comment out lines 85 thru 89 -

#install_dsym "${PODS_ROOT}/@react-native-mapbox-gl-mapbox-static/dynamic/MapboxMobileEvents.framework.dSYM"
#install_bcsymbolmap "${PODS_ROOT}/@react-native-mapbox-gl-mapbox-static/dynamic/93C58D95-90B9-30C8-8F60-4BDE32FD7E8E.bcsymbolmap"
#install_bcsymbolmap "${PODS_ROOT}/@react-native-mapbox-gl-mapbox-static/dynamic/BB87D8DD-493F-37AA-BD21-2BC609B8311B.bcsymbolmap"
#install_bcsymbolmap "${PODS_ROOT}/@react-native-mapbox-gl-mapbox-static/dynamic/B184533A-B4A2-3D2F-AD72-A6C33D9914F4.bcsymbolmap"
#install_bcsymbolmap "${PODS_ROOT}/@react-native-mapbox-gl-mapbox-static/dynamic/E2FE4B9E-73E5-34BF-B8B9-8FECEBE04D8D.bcsymbolmap"

For more information you can read the docs provided by Mapbox.

Android Specific Instructions

Place your secret token in your android app's top level gradle.properties file:

MAPBOX_DOWNLOADS_TOKEN=SECRET_TOKEN_HERE

Open up your project-level build.gradle file. Declare the Mapbox Downloads API's releases/maven endpoint in the repositories block.

allprojects {
    repositories {
        maven {
            url 'https://api.mapbox.com/downloads/v2/releases/maven'
            authentication {
                basic(BasicAuthentication)
            }
            credentials {
                // Do not change the username below.
                // This should always be `mapbox` (not your username).
                username = "mapbox"
                // Use the secret token you stored in gradle.properties as the password
                password = project.properties['MAPBOX_DOWNLOADS_TOKEN'] ?: ""
            }
        }
    }
}

Place your public token in your project's android/app/src/main/AndroidManifest.xml

<!-- This should be a child of the application tag -->
<meta-data android:name="MAPBOX_ACCESS_TOKEN"
    android:value="PUBLIC_TOKEN_HERE" />

For more information you can read the docs provided by Mapbox.

Usage

import * as React from "react";
import { StyleSheet, View } from "react-native";
import MapboxNavigation from "@harshpatel2125/react-native-mapbox-navigation";

export const SomeComponent = () => {
	return (
		<View style={styles.container}>
			<MapboxNavigation
				origin={[-97.760288, 30.273566]}
				destination={[-97.918842, 30.494466]}
				shouldSimulateRoute
				showsEndOfRouteFeedback
				onLocationChange={(event) => {
					const { latitude, longitude } = event.nativeEvent;
				}}
				onRouteProgressChange={(event) => {
					const {
						distanceTraveled,
						durationRemaining,
						fractionTraveled,
						distanceRemaining,
					} = event.nativeEvent;
				}}
				onError={(event) => {
					const { message } = event.nativeEvent;
				}}
				onCancelNavigation={() => {
					// User tapped the "X" cancel button in the nav UI
					// or canceled via the OS system tray on android.
					// Do whatever you need to here.
				}}
				onArrive={() => {
					// Called when you arrive at the destination.
				}}
			/>
		</View>
	);
};

const styles = StyleSheet.create({
	container: {
		flex: 1,
	},
});

MapboxNavigation Props

origin (Required)

Array that contains the longitude and latitude for the starting point. [$longitude, $latitude]

destination (Required)

Array that contains the longitude and latitude for the destination point. [$longitude, $latitude]

shouldSimulateRoute

Boolean that controls route simulation. Set this as true to auto navigate which is useful for testing or demo purposes. Defaults to false.

showsEndOfRouteFeedback

Boolean that controls showing the end of route feedback UI when the route controller arrives at the final destination. Defaults to false.

hideStatusView

Boolean that controls showing the StatusView (iOS only). This is the transparent black bar with the "Simulating Navigation" text shown in the above screenshot. Defaults to false.

onLocationChange

Function that is called frequently during route navigation. It receives latitude and longitude as parameters that represent the current location during navigation.

onRouteProgressChange

Function that is called frequently during route navigation. It receives distanceTraveled, durationRemaining, fractionTraveled, and distanceRemaining as parameters.

onError

Function that is called whenever an error occurs. It receives a message parameter that describes the error that occurred.

onCancelNavigation

Function that is called whenever a user cancels navigation.

onArrive

Function that is called when you arrive at the provided destination.

Contributing

Contributions are very welcome. Please check out the contributing document.

License

The source code in this library is MIT licensed. The usage of this library will fall under Mapbox terms (this library downloads Mapbox SDKs and uses that closed source in conjunction with the open source code here).