node-rcswitch4

Node bindings for the rcswitch.

Changes

This is an extended version of node-rcswitch project, the node-rcswitch2and the node-rcswitch-gpiomem3 project.

Comparing to original node-rcswitch it has:

• #9 - Replaced outdated rcswitch-pi dependency with the latest version of rc-switch project
• #11 - Added code receiving bindings
• #13 - Exporting of class instead of already created instance
• Updated to work with nodejs v12.x.x fixing the build error that ocurred

Although the project is now using generic RcSwitch library, it's still intended to be used on Raspberry Pi only.

Requirements

• Like the C++ version of rcswitch, WiringPi must be installed in order to compile.
• Both the data and the power Pins of the 315/433Mhz emitter must be connected to the RPi. Note the number of the WiringPi data Pin. (see http://wiringpi.com/pins/)
• The node command must be run with root access

Usage

Sending

var RcSwitch = require('rcswitch'); // Might throw an error if wiring pi init failed, or exit process if no root (must work on that)
var rcswitch = new RcSwitch();

rcswitch.enableTransmit(0); // Use data Pin 0 (GPIO 17)
rcswitch.switchOn("10110", 1); // Switch on the first unit of 10110 (code 1x23x) group
rcswitch.switchOff("11000", 2); // Switch off the second unit of 11000 (code 12xxx) group

Receiving

var RcSwitch = require('rcswitch'); // Might throw an error if wiring pi init failed, or exit process if no root (must work on that)
var rcswitch = new RcSwitch();

rcswitch.enableReceive(2); // Use data Pin 2 (GPIO 27)
setInterval(function () {
    if (rcswitch.available()) { // Check if there is a pending code
        console.log(rcswitch.getReceivedValue()); // Read and print the code
        rcswitch.resetAvailable(); // Reset `available` state
    }
}, 500); // Set code checking interval

API

Sending

Configuration

rcswitch.enableTransmit(pin)

Enable transmission on the given pin (make it an OUTPUT). Must be called before any other functions.

• pin - (Number) data Pin to use following the WiringPi schema

Return true if pin is an integer, false otherwise.

rcswitch.disableTransmit()

Disable transmission (set the pin to -1 which disable any following function call).

Return true.

Type A

rcswitch.switchOn(group, switch)

Switch a remote switch on (Type A with 10 pole DIP switches).

• group - (String) code of the switch group (refers to DIP switches 1, 2, 3, 4 and 5 where "1" = on and "0" = off - e.g. if all DIP switches are on it's "11111")
• switch - (Number) switch number (can be 1 (if DIP switch A is on), 2 (if DIP switch B is on) and so on until 4)

Return true.

rcswitch.switchOff(group, switch)

Switch a remote switch off (Type A with 10 pole DIP switches).

• group - (String) code of the switch group (refers to DIP switches 1, 2, 3, 4 and 5 where "1" = on and "0" = off - e.g. if all DIP switches are on it's "11111")
• switch - (Number) switch number (can be 1 (if DIP switch A is on), 2 (if DIP switch B is on) and so on until 4)

Return true.

Type B

rcswitch.switchOn(group, switch)

Switch a remote switch on (Type B with two rotary/sliding switches).

• group - (Number) group (can be 1, 2, 3, 4)
• switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

rcswitch.switchOff(group, switch)

Switch a remote switch off (Type B with two rotary/sliding switches).

• group - (Number) group (can be 1, 2, 3, 4)
• switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

Type C

rcswitch.switchOn(family, group, switch)

Switch a remote switch on (Type C Intertechno).

• family - (String) familycode (can be a, b, c, d, e, f)
• group - (Number) group (can be 1, 2, 3, 4)
• switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

rcswitch.switchOff(family, group, switch)

Switch a remote switch off (Type C Intertechno).

• family - (String) familycode (can be a, b, c, d, e, f)
• group - (Number) group (can be 1, 2, 3, 4)
• switch - (Number) switch (can be 1, 2, 3, 4)

Return true.

Other

rcswitch.send(code)

Send raw binary string code.

• code - (String) code

Return true.

rcswitch.sendTriState(code)

Send tri-state code.

• code - (String) tri-state code

Return true.

This function is useful for eg. micro-electric AS 73 which is also sold as REV Telecontrol in Germany (Version with house code with 6 DIP switches).

This socket has 10 DIP-Switches.

The house code uses the first 6 switches, the receiver code is set by the next 4 switches. For the house code, the switch position OFF is represented by F and switch position ON by 0.

Receiver codes:

Channel Switches 7-10

• 0FFF Channel A

• F0FF Channel B

• FFF0 Channel C

• FF0F Channel D

• FF or F0 Button on

• 0F Button off

The input string for the function is [homecode][channel][on/off value] e.g. F000000FFFFF for homecode 100000, Channel A and button on.

Receiving

rcswitch.enableReceive(pin)

Enable receiving on the given pin (make it an INPUT). Must be called before any other functions.

• pin - (Number) data Pin to use following the WiringPi schema

Return true if pin is an integer, false otherwise.

rcswitch.disableReceive()

Disable receiving (set the pin to -1 which disable any following function call).

Return true.

rcswitch.available()

Check if the code was received.

Return true if there is a pending code, false otherwise.

rcswitch.resetAvailable()

Reset available state to start recognizing of the next code.

Return true.

rcswitch.getReceivedValue()

Get the last received code.

Return integer representation of the code.

rcswitch.getReceivedBitlength()

Get bit length of the last received code.

Return integer length.

rcswitch.getReceivedDelay()

Get delay.

Return integer delay.

rcswitch.getReceivedProtocol()

Get protocol.

Return integer protocol.

rcswitch.getReceivedRawdata()

Get raw data.

Return array of raw data.