progresspieSVG

jQuery plug-in for dynamically rendering a pie or circle diagram comparable to a progress bar, depicting a progress, countdown, percent value or similar.

[Project home page][home]

What is this?

This software module contains a [jQuery][jquery] plug-in for drawing a partially filled circle (pie-chart with only one slice of the pie) for visualizing a single value between 0% and 100% inclusive, i.e. a kind of progress bar, but not in form of a bar but of a pie. The graphic is rendered inside a web page as SVG. In difference to e.g. the HTML canvas element, SVGs are scalable and render sharply on high resolution displays with device-pixel-ratio > 1 (e.g. Apple's “retina displays”).

As the name suggests, this component may be used to display a progress, starting at 0%, incrementing until 100% are reached. For this purpose the graphic may be dynamically updated (or, more precisely, replaced).

But just like progress bars these pies may actually be used to depict any percentual value, including static ones like e.g. percents of points achieved in a test. Mainly for this purpose, the pie may be dynamically colored based on the percentual value with colors like red hinting at a “bad” result, yellow for “mediocre” and green for “good”. There are default color schemes (always grey, green or red or dynamically calculated red/yellow/gree-shade as described above), but you may also assign any static color or your own JavaScript function mapping the value into a color.

This jQuery-Plug-in supports a wide range of options for customizability, so you may style the pie or ring charts in various ways, define value adapter functions for converting any raw value into a percent value to be displayed, even render more than one value in one chart (typically by arranging smaller rings or pies inside one outer ring). A content plug-in architecture allows for additional content to be added to a chart, like control icons, error or warning icons (e.g. if the diagram is used to depict the progress of some job which will not always terminate successfully but might produce errors or warnings), background icons, value display etc. Various content plug-ins are included (see separate example page), and you can also create your own ones.

The basic usage is to add static charts to a page already containing the values, so these get displayed graphically. If the value is not static but the user's input in a form field, the plug-in can automatically update the chart when the input's value changes.

Via JavaScript, it's also possible to dynamically updated charts (even with smooth transition/animation), e.g. for building a real progress indicator for some process running in the background (maybe even a server's progress monitored by Ajax status requests).

Examples

See the examples pages to get an impression of the looks and for different demo scenarios.

• examples.html: Examples for direct usage of the plug-in
• examplesAppl.html: Examples for indirect use with progresspiesvlAppl.js
• examplesContentPlugins.html: Examples for usage of the bundled content plug-ins (control icons, check complete, value display, background images, …)
• examplesAnimation.html: Examples for configuring animated value transitions

You'll also find an online live view of these examples on the [project's home page][home].

JavaScripts

This package contains several JavaScript files.

1. The script files in folder js are the source files. Please note that—starting with version 2.4.0—these use ECMAScript-6-Syntax and are not compatible with older browsers wich only support up to ECMAScript 5! For better browser compatiblity use the following minified versions!
2. The folder js/min contains the production versions. These have been transpiled (with Babel) to ECMAScript 5 and minified (with UglifyJS), so they are smaller and may be run on more, older browsers that the source scripts.

The individual script files (file names of source versions, production versions' names end with -min.js):

• jquery-progresspiesvg.js: The jQuery plug-in itself. It may be used stand-alone.
• jquery-progresspiesvg-controlIcons.js: A content plug-in as an addition to the jQuery plug-in above. Loading this file on top of jquery-progresspiesvg.js enables you to draw control icons (play, stop, pause) inside ring graphs using the svgContentPlugin option of the progresspiesvg plug-in.
• jquery-progresspiesvg-checkComplete.js: A content plug-in which may add a check mark to a pie or ring graph for value 100%.
• jquery-progresspiesvg-errorIcons.js: A content plug-in for adding warning or error icons to a chart, e.g. in case a monitored progress crashes or terminates with an error or warning message.
• jquery-progresspiesvg-image.js: A content plug-in for adding content from external image files (preferrably SVG, but other browser-supported formats like PNG or JPEG will also work). Images may be used in fore- or background or even be masked by the pie chart, see examples.
• jquery-progresspiesvg-valueDisplay.js: A content plug-in for displaying values (percent numbers or other values converted to percent, e.g. seconds of a minute) in the center of a ring graph.
• progresspiesvgAppl.js: This is meant to simplify the use for those who do not want to write JavaScript code to apply and configure the plug-in. This script file may be included into your HTML (in addition to jQuery and the plug-in above). If you do so, you may insert progresspie charts simply by writing HTML, inserting the percent values and assigning some predefined CSS classes or data-Attributes.

Changes in V2.0.0, backwards compatibility

Version 2 mostly adds new features like especially:

• Rendering rewritten to produce more compact SVG markup. (Rings and pies are now only a single elliptic stroke with instead of a filled area.) This was also precondition for the next feature:
• optional SMIL animation/transition (see examplesAnimation.html)
• More features for the inner option (second value/pie/ring):
  • background circle now also supported for inner rings/pies
  • “Double pies” extended to “multiple pies”: The inner option may itself contain an inner option (recursive)
• CSS support:
  • background circles and foreground pie or ring segments now always get a class attribute so you can define external CSS rules to modify or enhance their formatting.
  • new predefined CSS mode disables some inline formatting like colors in the generated SVG code or the inline style vertical-align in the svg node, in which case the formatting should be defined externally via CSS rules.
• overlap option
• Extended content plug-in API able to suppress the output of the actual pie or ring chart, especially if the content plug-in would totally cover/occlude it. This generates more compact SVG (without needlessly rendering effectively invisible graphics) and also draws “cleaner” edges around full size filled backgrounds of content plug-ins.

But some changes have been made which could affect backwards compatibility in a few cases. This is the main reason for the major version increase (see [semantic versioning][https://docs.npmjs.com/getting-started/semantic-versioning]): When updating to V2.0.0, you should make sure the following changes don't affect your current uses, otherwise you might have to (slightly) change them.

• The separator option is now ignored when inserting an SVG into a hitherto empty HTML element (e.g. <span id="pie" data-percent="50"></span>). In Versions 1.x.x, the separator (wich actually only serves to separate the prepended or appended SVG from the content of the node) was still appended, even if there was nothing to separate. This could have had some unwanted effects, e.g. if the target element was CSS-formatted to have a background color and the SVG should be centered inside, but was not due to the space appended to it. On the other hand: If you've been relying on this separator being inserted even into empty documents, you'll now have to put it into the document by yourself. Example: If you had some markup like <span id="pie"…></span><span id="X">…</span> and relied on a space being inserted after the SVG into the #pie element so that the pie and the content of #X were separated, you'd best now insert a space directly between the two span elements.
• The default valueAdapter function now uses parseFloat instead of parseInt for parsing string numbers, meaning that it now supports decimal digits if the dot (.) is used as decimal separator.

Changes like having a separator only separate the newly inserted and old content and not (any more) adding a ‘separator’ that's actually not separating anything, these are more kind of a fix than a new feature. They IMHO make sense, but sadly they affect backwards compatibility. Other than that, I've strived to retain backwards compatibility as far as possible, and most users won't probably have to change anything.

Usage

Direct usage of the plug-in (without progresspiesvgAppl.js)

Basics

• Include jQuery (tested with jQuery 1.11, but should work with jQuery 2 and 3, too) and the script file jquery-progresspiesvg.js into the head of your HTML file.

• Insert the percent values into your HTML body that are to be visualized. This may be done in several ways:

  • Should the number be visible and a pie in text height should be inserted before or behind the acutal number? This is the default. In this case, for each progresspie to insert, write the number (and only the up to three digits) into an HTML element like span and make sure this element may be selected via jQuery (e.g. by adding a classname like "percent" or "progresspie"). Example: <span class="percent">42</span>&nbsp;%.
  • Should the number / digits be invisible and only a pie is to be inserted? In this case create an empty HTML element where the pie chart is to be inserted and write the number into an attribute of this element (usually prefixed with data-), e.g.: <span class="pie" data-percent="42"></span>.
    • In this case, you'll have to include an option when calling the progressPie() plug-in defining where to find the value, preferrably the valueData option, alternatively the valueAttr option.
  • Should the value actually be the value of a form input element editable in the browser by the user, that's also possible.
    • In this case you'll have to use the setupProgressPie() plug-in function to setup an updateable chart (see below). The valueInput option can be used to specify the value source as well as setup an event handler for automatic update of the chart when the input value changes.

• Write and include some script code that gets executed after rendering the HTML (generating the DOM). This code is to select the (span-) elements you created in the second step with a jQuery query and to apply the plug-in to the selection/query result. Example corresponding to both data elements above:

    <script type="text/javascript">
        $(function() {
            $(".percent").progressPie(); //default mode
            $(".pie[data-percent]").progressPie({ //specifying options object
                valueData:"percent",
                color:"navy",
                size:30
            });
        });
    </script>

• For each selected element, the script will try to read the number (from the element's content or from a data attribute, if the option valueData is given and the element provides a data attribute, prefixed with data-, of that name or the data is set by calling jQuery's data() method) and render the piechart SVG, which will be inserted into the selected element.

• By default the SVG image gets prepended to the content, optionally it may also be appended. Also, a separator string may be inserted between the pie and the original content (by default this is a non-breaking space:  ). If the target element is empty (like in the second example with the data attribute), the SVG is simply inserted into that element without the separator.

• In case the values aren't static but should be updatable, the initialization should be done with the setupProgressPie() method and the parameterless progressPie() method can be used multiple times to (re)draw die graph:

    <script type="text/javascript">
        $(function() {
            $(".pie[data-percent]").setupProgressPie({ //specifying options
                valueData:"percent",
                color:"navy",
                size:30
            }).progressPie(); //draw the pie (1st time) using the above setup.
        });
        function demoUpdate(p) {
            $(".pie[data-percent]").data("percent", p).progressPie();
            //update the percent data and initiate redraw. (The progressPie()
            //method will read the "percent" data as specified in the setup.)
        }
    </script>

  • If the value should be taken from a form input element (see above), you'll not even have to write an update trigger function, the valueInput option will automatically register an event handler for updating the chart (by calling progressPie()) on the input.
    Example:
    The HTML:

      <input type="text" id="inp1" name="inp" value="50">
      <span id="pie1"></span>

    The JavaScript call:

      $("#pie1").setupProgressPie({
          valueInput: $("#inp1")
      }).progressPie();

    See the main examples page for more detailed examples including the additional valueInputEvents option.

Options

If you simply call progressPie(), the plug-in will be used with default options. This includes that the percent number is expected to be the (only) content of the selected element, the pie will be prependet to this content (separated with an  ), it will be rendered in line-height and in a shade of grey (#888). It will only be inserted, if the element does not yet contain any SVG content: repetetive calling of the function will therefore neither insert the SVG multiple times nor will it update the graphic.

To modify the looks or behaviour, the function takes exactly one argument, which has to be a JavaScript object which defines options via its properties. The following option properties are defined:

• mode: constant of enum type $.fn.progressPie.Mode. Default is $.fn.progressPie.Mode.GREY. Possible values are:
  • $.fn.progressPie.Mode.GREY: Default Mode, pie is drawn in a shade of grey.
  • $.fn.progressPie.Mode.RED: The pie is drawn in red color regardless of the percentual value.
  • $.fn.progressPie.Mode.GREEN: The pie is drawn in green color regardless of the percentual value.
  • $.fn.progressPie.Mode.COLOR: The color of the pie is depending on the percentual value (see above). The color is the same green color as in mode GREEN for a value of 100 percent, the same red color as in mode RED for a value of 0%, a yellowish mix of both for 50% and a gradient in between green and yellow for values greater than 50% resp. between red and yellow for values less than 50%.
  • $.fn.progressPie.Mode.CSS: The colors (stroke of foreground and background and fill of background) as well as the vertical-align style of the root svg element are left unspecified. If this mode is chosen, you have to define the colors and vertical alignment via CSS rules (see examples)! Note: If the mode option is set to CSS mode, any color option will be ignored!
  • $.fn.progressPie.Mode.MASK: The pie or ring chart is not added to the main, visible area of the SVG but is instead inserted as a mask which is then applied to the topmost background layer. This requires at least one background layer to be present: Any layer other than the pie layer (which is inserted in any mode but MASK or IMASK) can only be inserted by a content plug-in, i.e. this mode is only made to be combined with at least one content plug-in (see the contentPlugin option). Since content plug-ins may insert either a foreground layer (draw on top of the chart) or a background layer, the contentPlugin option must hold at least one plug-in drawing into the background.
    As has already been said, the mask defined by the pie chart gets applied to the topmost background layer. By default that means that the output of the first content plug-in drawing into the background will only be visible in those parts of the graphic which would normally be covered by the pie chart.
    In MASK mode the space around the pie or ring chart is always transparent, the pie itself is white by default. If you understand masking and wish to change that, you may alter the colors of the chart and its background (filled background inside the circle) by using using options like strokeColor, color, backgroundColor etc., the space outside the chart's circle is always transparent in this mode.
    See JSDoc for these Mode constants and the examples page on content plug-ins!
  • $.fn.progressPie.Mode.IMASK: Inverted Mask Mode: This resembles the MASK mode above, only the mask in inverted: By default, the foreground of the pie is black and all the background (inside and outside of the chart) is white, meaning any part of the first background layer which would be visible in normal mode will still be visible, but the chart is not drawn on top of that background layer, but it's “cut out of” the background, leaving a pie-/ring-shaped transparent hole in the background layer.
    In this mode, too, you may alter the default colors of the mask (defining a grade of transparency) by other options.
    See JSDoc for these Mode constants and the examples page on content plug-ins!
• strokeWidth: number. Default is 2. Determines the stroke with of the background circle.
• strokeColor: string, color code. Default is undefined. If undefined, the background circle is drawn in the same color as the rest of the pie. If set to a color code like #ddd or silver, this defines the color of the background circle.
• strokeDashes: number or object. Default is undefined. This defines an optional dash pattern for the background circle's stroke. A number value is simply a short hand syntax for an object with only the sub-option count. If this is an object, it must at least contain the count property. Allowed properties are as follows:
  • count: number, mandatory. Defines into how many dashes (and gaps) the background circle is to be divided. By default dashes and gaps are equally long (circumference/(2*count)).
  • length: number or string. Defaults to undefined. If set to a number, this defines the length of each dash in pixels. This should only be used if the total size of the graph and thus the circumference in pixels is known to be longer than length * count! Alternatively this may be set to a string literal containing a number followed by a percent sign, e.g. length: '10%'. This defines a relative length of each dash and is applicable independently of the graph's size. If you use count and length, the length of the gaps between the dashes is auto-sized in order to equally distribute the dashes around the circle.
  • centered: boolean. Defaults to undefined. If falsy (e.g. undefined or false), the first dash will start at (end the last gap will end at) exactly the circle's top (12 o'clock position). If true (or truthy), the first dash will be horizontally centered around that position.
  • inverted: boolean. Defaults to undefined. If true (or truthy), the pattern is inverted such that the gaps are replaced by dashes and vice versa. I.e. in inverted mode the length property will define the length of the gaps and the dashes will be auto-sized, and the first gap will start at (or, if centered is set, be centered around) the 12 o'clock position.
• overlap: boolean, defaults to true. If true, the foreground (pie/ring segment) is drawn full size, i.e. with the same radius as the background circle, so the foreground overlaps the background. This is usually only visible, if the strokeColor (color of the background circle) is set and differs from the foreground's color. Set this to false in order to fit the foreground (pie/ring) inside the blank space of the background circle.
• ringWidth: number. Default is undefined. If undefined, a portion of the pie will be filled, cut out just to the center of the circle (like a partial sweep of a radar). If ringWidth is a number, only the outer rim of this piece of the pie is drawn, leaving an empty circle in the middle with diameter size-2*ringWidth. If no strokeColor is defined (and overlap is true) ringWidth must be greater than strokeWidth in order for the (partial) ring to be visible. (See examples)
• ringEndsRounded: boolean. Default is false. Only applicable if ringWidth is defined, ignored in pie mode. If a ring is drawn, both ends of the ring are normally cut rectangularly. Enabling this option draws a semicircle cap on each end. This might look prettier especially for very large graphics with usually strokeWidth === 0. Note however that, the higher the ringWidth value, the longer the ring seems, for the semicircles are added to the ring. Very high values like 99% will then look like a full 100% (for the semi circle ends overlap).
• ringAlign: constant of enum type $.fn.progressPie.RingAlign. Defaults to $.fn.progressPie.RingAlign.OUTER. This option is only applied if ringWidth and strokeWidth are both defined and both greater than zero. Its meaning correlates with the overlap option. Possible values are:
  • $.fn.progressPie.RingAlign.OUTER: The ring's outer edge is aligned with the background circle. If overlap is true, it is drawn on top of the background circle and both circles outer edges are aligned. If overlap is false, i.e. both circles don't overlap, the ring is drawn inside the background circle, the ring's outer edge touches the inner edge of the background circle.
  • $.fn.progressPie.RingAlign.INNER: The ring's inner edge is aligned with the background circle. If overlap is true, the ring is drawn on top of the background circle such that they are both aligned on the inside. If overlap is false, the background circle will be drawn inside the ring, the ring outside around the background circle.
  • $.fn.progressPie.RingAlign.CENTER: In this mode, both circles share the same radius, i.e. they are both centered on the same circle, the wider stroke will expand further to the inside as well as to the outside of that circle. (This is only applicable if overlap is true, without overlap, no centering is possible.)
• prepend: boolean. Default is true. If true, the pie will be inserted at the beginning of the element's content, followed by the separator string. If false, the separator string followed by the pie will be appended to the element's content. If the target element is completely empty, the pie will become the sole content, this option (as well as the separator option, see below, will be ignored).
• separator: string. Default is " ". Will separate the inserted pie from the rest of the content (usually the number), see prepend. Ignored for empty elements.
• verticalAlign: string. Default is "bottom". Defines the CSS-property vertical-align of the inserted SVG element and thus the vertical alignment. By default, the image is aligned with the bottom of a line. In certain circumstances (like setting a line-height style greater than 1em) you might want to vertically center the image by setting this option to "middle". (This option is ignored in CSS mode, see above, since in that mode no local vertical-align style will be defined at all, but it's left to you to define a global CSS rule for the alignment!)
• update: boolean. Default is false. If false, the function will do nothing if the target element already contains an svg element. Set to true if repeated calls are meant to update the graphic. If true, the function will remove an existing svg before inserting a new one. Typically only needed in combination with valueData or valueAttr, see also: Dynamically updating pies
• size: number. Default is undefined. If undefined, the plug-in will try to draw the pie in the actual height of the parent element. Beware: If the element is empty, the browser may have calculated a height of 0! In this case, a default size will be used. Defining this option disables auto-sizing: the provided number will be used as height and width of the svg. It has to be a number (in pixels), not a string with a unit! This is typically used on empty elements in combination with valueData, valueAttr or valueSelector.
• sizeFactor: number. Default is 1. The size (either given by size option or auto-calculated, if no size is explicitly specified) is multiplied by this factor to get the “final” diameter before drawing the chart.
• scale: number. Default is 1. The already rendered SVG is finally scaled by this factor. In difference to sizeFactor this does not simply change the diameter/radius of the chart, but scales all other aspects, such as strokeWidth, ringWidth etc., too.
• valueAttr: string. Default is undefined. Name of a value attribute: If defined, the function will look for an attribute of this name inside the opening tag of the found element, and if found, it will parse this attribute's value instead of the element's content as the percent value. (If defined but not of type "string", the function will throw an exception.) For accessing data-* attributes, the next option valueData is usually preferred, use valueAttr only if you want to read other attributes (not beginning with data-) or if you really want to react to updates to the attribute in the DOM tree.
• valueData: string. Default is undefined. Mutually exclusive with valueAttr, valueSelector and valueInput! Name of a jQuery data object. When parsing, jQuery will create data objects for each data-* attribute, e.g. for an attribute data-percent="50" in the HTML, the jQuery function data("percent") will return the number 50 (not a string). In this example, you may specify the option valueData: "percent" to access the data from the data-percent attribute. This is nearly equivalent to valueAttr: "data-percent", but differs in two important respects: Firstly, numbers are automatically recognized and parsed, so the valueAdapter does not have to parse the string itself, secondly (and most important), value updates set by calling the jQuery function data(id, newValue) (e.g. $(selector).data("percent", oldvalue++)) will be recognized when updating the pies. Be aware that jQuery does not update data-attributes upon calling the data-setter-function. Attributes and stored data objects only match initially, but updates to the data objects are not propagated to the string attributes in the DOM tree. So if you were using option valueAttr: "data-percent" instead of valueData and wanted to dynamically update the pie, you'd have to explicitly update the data attribute via jQuery function attr("data-percent", newValueAsString), whereas use of valueData enables you to simply update the value via data("percent", newValueAsNumber), which is simpler and more efficient. (If this option is defined but not of type "string", the function will throw an exception.)
• valueSelector: jQuery-Selector (string). Default is undefined. Mutually exclusive with valueAttr, valueData and valueInput! If defined, the function will apply a jQuery search within the selected element to find a sub-element whose text content is to be used as a value. Usually, the whole text content of the node previously selected (to which the progresspie plug-in is applied) is interpreted as the value. If you want to have more content, maybe for CSS styling reasons, and the actual value is in a sub-element, but the pie should not be inserted into that sub-element but into the previously selected main element, then this option is for you. The examples page demonstrates an application of this option.
• valueInput: jQuery result set containing an input element or alternatively a jQuery-selector (string) referring to an input element. Default is undefined. Mutually exculsive with valueAttr, valueData and valueSelector. If this option is defined, the value for the pie will be read from that input (from the jQuery result set passed in this option or, in case a selector string was passed, from the resultset obtained by $(selector)) via jQuery's .val() method. This option is only available in the setupProgressPie() function and not with progressPie({…options…})! The setup will then not only define the options for the progress pie (or ring), but it will also add an event listener to that input (via jQuery's .on() method executed on the result set), which will update the pie upon changes to the input (by simply calling progressPie() on the associated result set). More specifically, by default the event handler listens to the change event, but you can override that default with the following option:
  • valueInputEvents: String, default is "change". Space-separated list of event names the input event listener (added by setupProgressPie() when the valueInput option is given) will react to (by updating the pie). If valueInput is undefined, this option will be ignored.
  • Please note that, if you should later change the setup by a succeeding call of setupProgressPie and change the valueInput or valueInputEvents option, this will not deregister the event handlers registered by the first call! If needed, the .off() method has to be called manually!)
• valueAdapter: function. Default: see below. The valueAdapter function is executed when interpreting the value, i.e. either the element's content (string), the value of the attribute denoted by the valueAttr option (also a string) or the data object denoted by the valueData option. It has to map the value (string or number) to a number within the range [0..100], which is then used to calculate the pie graphic. So if you have raw data that's not a percent value (for example an hour value out of [0..12]), you may write an own valueAdapter reading this value and returning an int in [0..100]. (See examples page.)
  • If you use the valueData option, the type of the argument is the type of the object stored in the data model. This is usually a string or a number, but your own script code controls the type of objects stored there.
  • If you don't use the valueData option, the type of the argument is always string.
  • The default valueAdapter $.fn.progressPie.defaults.valueAdapter (which is used whenever this option valueAdapteris undefined) applies parseInt to any string argument, returns any number argument unchanged and returns 0 for an argument of any other type.
• color: string or function. Default is undefined. If undefined, the color of the pie depends on the mode option, see above. A valid string value of this option would be a color name like navy or color code like #888, #FF00BC, rgb(10,20,255). If the value is a function, this function has to read one parameter of type number (0..100) and return a color code (string). If the option is neiter undefined nor a string nor a function, the plug-in will throw an exception.
• colorAttr: string. Default is undefined. Only evaluated if color is undefined. Name of a color attribute: If defined, the function will look for an attribute of this name inside the opening tag of the found element, and if found, will try to use the attribute's content (string) to set the pie color. The attribute must contain a color name or code (see color).
• colorFunctionAttr: string. Default is undefined. Only evaluated if no color has already been set with color or colorAttr. Name of an attribute containing JavaScript code (as string literal) for calculating a color.
• animate: boolean or object. Default is undefined. May be set to true for default animation options (defined in jQuery.fn.progressPie.defaultAnimationAttributes) or to an object containing valid SMIL options (key-value-pairs like dur for the animation duration) in order to set up a customized animation. Animation is applied for static pies when rendering the page (the animation then starts at 0% and gradually fills the chart up to the assigned percent value) and is also applied for each redraw of the chart (animating the transition from the previous to the newly set value). See separate animation examples page and jsDoc for the defaultAnimationAttributes object.
  • If you use the inner option (see below) to add a second or even more values, these inner options inherit the animate option in case they don't define it themselves. To disable an inherited animation for an inner value, inner.animate may simply be set to false.
• animateColor: boolean. Default is undefined. Effectless if the animate option is not set (or false) or if the color of the chart is constant. So let's assume you use a color function, so that a value change also may cause a change of the diagram's color:
  • If this option is set to false, the chart will immediately be drawn in the final color, the animate option will only add a value transition. Especially when incrementing or decrementing the value and redrawing/updating the pie, the color will change abruptly even before the value change transition starts.
  • If this option is set to true, in addition to the value transition also a color transition is added. Note that the easiest, ‘direct’ color transition between start and target color is used, i.e. the intermediate colors do not necessarily comply with your color function's results for the intermediate percent values!
  • If this option is left undefined, a default color transition mode is used, which means: Upon the first drawing of a pie (loading the page), the pie will immediately be drawn in the final color (as with false value), only the value will be filled animatedly. Each redraw/update on the other hand will use color transition (as with true value).
  • The latter (default mode) is the recommended setting, only define the animateColor option if you either want to completely disable color transitions for redraws (false) or if you explicitly want to enable color animation even for the first drawing upon page load (true).
• rotation: string, boolean or object. Default is undefined. If this option is ‘truthy’ (i.e. not undefined, not false, not 0 etc.), the (outer) pie or ring fragment will be animated by rotating around its center. The default speed is one rotation per second, the default direction is clockwise. (Both are applied, if you set rotation: true.) If the option is a string, it has to be a duration definition, i.e. a number with a time unit. It will define the rotation speed by setting the duration for one full (clockwise) rotation. Legal values are numbers with units like "2s" for two seconds or "500ms" for 500 milliseconds, i.e. half a second. The rotation option may also be assigned an object with two (sub-)properties: 1. duration defining the duration of one turn (just like the simple string value for rotation), 2. clockwise is a boolean defining the rotation direction. Set this to false for an anti-clockwise rotation.
  It's not recommended to define a rotation for pies or rings acually measuring a progress, but for usage with constant values to draw a “busy-indicator” like a rotating ring with a small gap. The constant value (like 90% for a ring with a 10% gap) may be specified by setting a valueAdapter function returning this constant. See examples.html!
• globalTitle: string. Default is undefined. If defined, this string will be added as a title to the whole SVG image. What a title does, depends on the platform. A typical modern desktop web browser, for example, will usually display this title as a so called tooltip whenever the mouse cursor rests on the image for some time.
• title: string. Default is undefined. Similar to globalTitle, but the title string is not applied to the (rectangular) SVG image as a whole, but only to the pie or ring (foreground pie or ring as well as background circle). Both options can be combined: If so, a desktop browser usually displays the title whenever the mouse cursor rests on the pie or ring itself, and the globalTitle if it rests on some other area of the SVG's canvas (like the empty circle inside a ring chart, the cut-out area of a pie or the areas outside the circular chart).
  The main purpose, however, of the specific title option is to label the values of multiple pies/rings obtained by use of the inner option (also see examples).
• inner: Object. Default is undefined. This object may contain a subset of the option properties described above {mode, color, colorAttr, colorFunctionAttr, valueData, valueAttr, valueSelector, valueAdapter, size, strokeWidth, strokeColor, strokeDashes, overlap, ringWidth, ringEndsRounded, animate, animateColor, rotation, title, inner (recursive)}. If inner is defined, then two piecharts will be drawn: An outer, larger chart, described with all the other options, and a second, smaller, inner pie on top of the outer. The inner circle's value might be taken from a second attribute (denoted by inner.valueAttr) or might be calculated from the same value string as the outer value, just by a different inner.valueAdapter mapping. At least one of these two options should be defined. Also, the inner pie should have a different color than the outer one, defined by inner.mode or inner.color. If inner.size is specified, the outer size option should also be set manually and should be larger than innser.size. If inner.size is left undefined, the inner pie is automatically slightly smaller than the outer one (approx. two thirds of the outer). If the inner option contains yet another inner option, than a third pie with those options is added, and so on.
• CSS class name options. Individual components of the rendered SVG graphic are equipped with CSS class attributes. This enables you to apply external CSS styling rules. The following options may be added to the progressPie function call in order to override the default CSS class names:
  • cssClassBackgroundCircle: string. Defaults to "progresspie-background". This value get set as CSS class (via an attribute class="progresspie-background") to the closed circle shape always drawn as background behind the actual pie or ring.
  • cssClassForegroundPie: string. Defaults to "progresspie-foreground". Just like the option above, only this class is assigned to the actual pie or ring segment drawn on top of the background circle.
  • cssClassOuter: string. Defaults to "progresspie-outer". In case you specify the inner option in order to display a second (or even more) inner pies or rings, this class is assigned to both background and foreground of the outer graph. E.g. the outer background circle is equipped by default with an attribute class="progresspie-background progresspie-outer".
  • cssClassInner: string. Defaults to "progresspie-inner". In case you specify the inner option, this CSS class is assigned to the second (i.e. the (first) inner) graph just like the cssClassOuter option is to the outer graph. In case you use nested inner options, starting with the third chart (the “inner inner chart”) a number (starting with 2) is appended to this class name. E.g. the foreground of the third (“inner inner”) chart will bear the attribute class="progresspie-foreground progresspie-inner2".
  • Please note that these four options must be “root options” of the plug-in call. I.e. it's not supported to add these options to an inner option object.
• optionsByPercent: function. Default is undefined. You may specify a function which takes the percent value (0..100, if a value adapter is used, this is the value returned by the adapter) and either returns null or an object with progresspie options from this very list, depending on the percent value. If, for some value, the function returns null, it has no effect. If, for some value(s) it returns an object, the options returned will override the global options passed directly to the jQuery plug-in. So, for example, you may specify a function returning null for any value > 0, but returning some other options for rendering a rotating ring for a value of still 0%. (Actually, this is a more universal version of setting a color function, since it may not only override a global color based on the depicted value, but may also change other properties like size, stroke with, rotation etc.)
  • Note: If this function returns, in some case, an object containing an option like valueData, valueAttr, or valueSelector, this may retrospectively change the raw and percent value, but neither optionsByPercent nor optionsByRawValue will be called a second time.
• optionsByRawValue: function. Default is undefined. Alternative to optionsByPercent: While the latter is given a percent value (numer in 0..100) calculated by the value adapter (see option valueAdapter), this function is given the same raw value which is also fed into the value adapter function. This may be a string or a number, as explained in more detail in the description of the valueAdapter function. If you don't define a valueAdapter option, you probably won't need this option either but should stick to the optionsByPercent function, wich is guaranteed to receive a number argument.
  • Note 1: If this function returns, in some case, an object containing an option like valueData, valueAttr, or valueSelector, this may retrospectively change the raw value, but this function won't be called a second time.
  • Note 2: Should you specify both, optionsByRawValue and optionsByPercent, both will be executed in this order, i.e. first the optionsByRawValue may extend the global opions, after which the optionsByPercent function will be executed, which may, yet again, extend the global options and especially may also override global options or those returned by optionsByRawValue.
• contentPlugin: string or function or array of strings and functions. Default is undefined. Specify a content plug-in function to add content on top of a pie chart or inside of a ring chart. If you want to apply more than one content plug-in, enumerate the plug-ins in an array.
  See section “SVG Content plug-ins”.
• contentPluginOptions: object or array of objects (same size as contentPlugin). If the contentPlugin option is set, this object may provide plug-in-specific options for configuring each of the content plug-ins. See section “SVG Content plug-ins”.
• margin: number or array of up to four numbers. Defaults to 0. With this option you may enlarge the SVG image around the actual pie chart, i.e. define the with of a transparent area (margin) around the pie. Effectively, this simply defines a larger viewBox for the SVG. (Normally you should not need this, it should be preferrable, if you want a margin around a pie chart in your HTML page, to just define a margin around the SVG image itself or its container element via CSS. But if you should, for some reason, really want to define a margin around the pie inside the SVG, this option is for you.) If you assign just a number, that number denotes the width of the margin on all four sides, the result will still be a square image, just a bit larger. If you assign an array of four numbers (e.g. margin: [1,2,3,4]), the first defines the top margin in pixels, the second's the right margin, the third number defines the bottom margin and the last is the left margin. I.e. the margins are enumerated clockwise starting at the top (12 o'clock), just like in CSS's short-hand margin syntax. Also analogous to CSS, if you enumerate less than four numbers in that array, the left margin will equal the right margin, if you don't list a third value, the bottom margin will equal the top margin.
• padding: number or array of up to four numbers. Defaults to 0. This is very similar to the margin property, only this is an inner border/area inserted between the margin and the pie chart. If you specify both, the viewBox will thus be enlarged in each direction by the sum of padding and margin. If you specify only one of both, you will normally not see a difference – at least not if you don't use certain content plug-ins: A content plug-in may draw content not only in the actual chart's area, but also into the padding. Take the image plug-in for example, which may be used to add a background image to a chart. The image will fill the background of the actual chart plus its padding, but not its margin. See content plug-in examples page!

Dynamically updating pies

The default usage is to have some static percent values (or even other kinds of values which can be transformed to a percent value using a value adapter function, see options / examples) and to insert pie graphs visualizing those values.

But of course your values might get updated (via JavaScript). If that happens, the derived pie charts are not automatically updated too, but your script code updating the values has to trigger a pie update as well.

In fact, the existing SVG code does not really get updated (meaning: modified), but completely replaced by a newly generated SVG image.

In order to redraw a pie, you might simply use usual $(target).progressPie({options...}) call, repeating the options all over. But if you do that, pay attention to the update option: If you leave it set to false, existing graphics won't be replaced, but only missing graphics will be drawn:

• In default mode (i.e. your value is content of an HTML element and the SVG gets prepended (or appended) to this content) a dynamic value update is usually achieved by:
  • overwriting the content with a new value, effectively removing the previously rendered pie, and
  • re-calling the plug-in to render any missing pies. Since the content replacement has already removed the previous pie from the document, the update option may stay set to false (default value).
• In valueData or valueAttr mode (the number is not visible but present as an attribute to the element whose content usually—but not necessarily—consists only of the pie), an update is best achieved by:
  • overwriting the value data (using jQuery's data() function) or attribute and
  • re-calling the plug-in with option update: true.

But usually, the options should stay constant and only the displayed value changes. In this case, it's best not to repeat the options with each update call.

Therefore, the recommended way is to setup the options once before first drawing the pie(s) (using the setupProgressPie() function) and then to redraw it (them) by only calling the parameterless progressPie() function (see section Basics above). If you do that, you also don't have to bother thinking about the update option: When you use setupProgressPie() and don't specify the update option, it automatically defaults to true, meaning each parameterless progressPie() call will update existing pies.

Have a look at the examples page to see updates in action.

Since version 2.0.0, updates may also use transitions, such that the update triggers an animation smoothly increasing (or decreasing) the pie or ring chart's state starting from the old value (before the update) and ending with the current value. (SMIL animations are not supported by all browsers, especially neither Microsoft Internet Explorer nor Edge support them. The charts will sill be updated on those browsers, only the animation will be missing.) To use animation, simply add the animate option, maybe combined with the animateColor option, see above, to the setup.

See the separate examplesAnimation.html page for demonstration.

Overwriting default options

• You may insert a JavaScript code executed immediately when loading the document (but only after loading the jQuery plug-in) that modifies the $.fn.progressPie.defaults object by either overwriting a property with a new default value other than that described above or by introducing a new property with a default value for an option that is normally undefined by default.
• The default color for progresspies (#888) is defined in the property color of the default Mode enum constant: $.fn.progressPie.Mode.GREY.color. This is a string property and may be overwritten with any valid color code in order to set a different default color for the default mode (GREY).
• Similarly, the default colors for modes COLOR, GREEN and RED are stored in properties of the Mode enum values:
  • $.fn.progressPie.Mode.RED.value is a number between 0 and 255 (inclusive), i.e. a byte, defaulting to 200.
  • $.fn.progressPie.Mode.GREEN.value is also a byte defaulting to 200.
  • The color in mode RED is simply rgb($.fn.progressPie.Mode.RED.value, 0, 0).
  • The color in mode GREEN is thus rgb(0, $.fn.progressPie.Mode.GREEN.value, 0).
  • The color in mode COLOR is calculated by $.fn.progressPie.colorByPercent(number) as an RGB code also based on these constants.
  • Thus, if you want to use these modes but want to adjust the brightness of the calculated colors, you may adjust these properties.

Writing your own color function

As described above, by simply setting the option {mode: $.fn.progressPie.Mode.COLOR}, the color of the pie get dynamically calculated based on the percent value, and the colors used for that are in some degree customizable via overwriting $.fn.progressPie.Mode.GREEN.value or …RED.value.

But if you want more flexibility in dynamically setting a color, you may provide your own JavaScript function which receives the percent value as parameter (number) and has to return a string describing the color (like #3bf or rgb(100,255,100)).

You could simply overwrite the function $.fn.progressPie.colorByPercent. This way your function would always be applied for any pie rendered in COLOR mode.

But the more flexible way is to write one or more own color functions and apply them individually to (classes of) pies instead of using the default COLOR mode, which is then still available.

Simply write your function and then set a reference to it in the options passed to the options, like in:

<script type="text/javascript">
function blueGt25(percent) {
  var blue = percent < 25 ? 0 : (percent-25)*3; //range from 0 to 3*75 = 225 ( = max brightness for value of 100%)
  return "rgb(0,0," + blue + ")";
}
	
$(function() {
  $(".test.myblue").progressPie({color:blueGt25});
});
</script>

The example above defines a color function which sets the pie color to black for all values of 0% to 25% inclusive. For values greater than 25% the color is blue: an rgb code with red and green values of 0 and a blue component growing brighter with the percent value up to 225 (a little darker than the brightest blue (255)).

Of course, a color function may also be embedded inline in the options object, if it's not needed elsewhere. The following example defines an inline function setting one (greenish) color for values starting at 50% and another color (reddish) for lower values:

$(".test.myfunc").progressPie({color:function(percent) {
  return percent >= 50 ? "#3f3" : "#f33";
}});

Last but not least you may reuse the internal color function $.fn.progressPie.colorByPercent within your own color function instead of calculating a color code all by yourself: Let's say, you want all values between 0% and 50% to be drawn in the same red and apply the default COLOR scheme only for values starting at 50% (green for 100%, yellow for 75%, red for 50%). This could be done the following way:

function colorGt50(percent) {
  var p = percent <= 50 ? 0 : 2 * (percent - 50);
  return $.fn.progressPie.colorByPercent(p);
}

valueAdapters and double/multiple pies

If the source value to be visualized as filled circle (pie) is not a percent value (0..100), you may write your own adapter function for mapping the actual values (any string) to a percent number (any number in [0..100], may be int or float). This mapping might be of arithmetic nature (e.g. converting a value of 0 to 60 minutes into a percent number) or of syntactic nature (e.g. extracting a percent number out of a string also containing other characters)—or both. Use the valueAdapter option (see above) to specify your adapter function. (The default value adapter is a function returning any number input unchanged, parsing any string input via parseFloat, and otherwise returning 0.)

If you want to display two values in one graphic (e.g. hours and minutes), that's also possible—not as simple to read/understand at first glance, though. Use the inner option (see above) to specify that and how a second, inner pie should be generated. By adding yet another inner options into the first inner option, you may even add a third value and so on.

The examples page examples.html contains demonstrations for both options.

Note: These features are only available with direct use of jquery-progresspiessvg.js and not via progresspiesvgAppl.js.

Simplified usage via progresspiesvgAppl.js

If you prefer not to write your own JavaScript-/jQuery-Code in order to apply the progresspie plug-in to selected elements of your choice, you may use this additional JavaScript file. It is a default application of the plug-ins to elements which must meet some conventions.

If you include this script into an HTML document, each HTML element of class progresspie is fitted with a pie chart. This requires the element (which is usually an inline element like a span) to contain a number from 0 to 100 (inclusive) as its only content or alternatively in an attribute named data-percent.

By default the pie is grey. By adding an additional class color, red or green you get a dynamically colored resp. statically red or green pie. (These classes must not be combined and activate the corresponding plug-in mode COLOR, RED or GREEN respectively.)
Adding the class vcenter activates vertical centering, otherwise the graphic is aligned with the bottom of the element.

For user-defined color you may either add an attribute data-piecolor defining a static color code or an attribute data-piecolor-function providung a string which evaluates to a function mapping a number (range 0..100) to a color code.

For adding a pie to an input element with auto-updating the pie when the inputs value changes, use the data-input attribute. Its value has to be a jQuery selector for the input which is to provide the percent value. (Note: This simple application script only supports updating on the change event, only can read plain percent numbers and does not support error messages for illegal values. For more features, you'll have to use the full-featured jQuery plug-in.)

• See JsDoc documentation of the script file (Namespace progressPies) for a more detailed description.
• See examplesAppl.html

SVG Content plug-ins

The progresspieSVG jQuery plug-in provides a private plug-in mechanism itself, which may be used to plug additional drawing logic into the main plug-in, adding SVG content to the pie or ring chart.

To apply a content plugin, add the option contentPlugin to the argument object you pass to the jQuery plug-in. The value of this option is either a reference to a javascript function (conforming to the plug-in API as described below), or simply the name of a function as a string. In the latter case the function must be member of the namespace jQuery.fn.progressPie.contentPlugin. Only then it can be looked up by its name. This is the recommended namespace for any content plug-in.

A content plug-in may itself be configured by an object defining options. Any properties defined in an object passed to the jQuery progress pie plug-in via its option contentPluginOptions will be passed along to the content plug-in specified by contentPlugin.

You may also apply more than one content plug-in: In this case, the contentPlugin option as well as the contentPluginOptions option have to be arrays of the same size: The contentPlugin array enumerates the names of the content plug-ins to apply (in that order), and the contentPluginOptions array has to hold the options object for the plug-in with the corresponding index.

Content plug-ins may draw into the foreground or into the background. Each content plug-in's output is inserted as a new layer into the SVG image: A plug-in drawing into the foreground inserts a new layer on top of all already existing layers (i.e. if you enumerate more than one foreground-plug-in in the contentPlugin option array, the first one gets put on top of the chart, the second one on top of the first etc.). A plug-in drawing into the background inserts a new layer behind any previously existing (i.e. if you enumerate more than one background-plug-in, the first one's output will be placed directly behind the chart, the second one's behind the first one's etc.).

Should you use the MASK or IMASK mode, the pie will not be inserted as a layer (between background and foreground plug-in's layers) but will be applied as a mask to the first (topmost) background layer.

See separate examples page on content plug-ins for demonstrations.

Bundled content plug-ins

Control Icons

jquery-progresspiesvg-controlIcons.js is a script file defining three such content plug-ins play, stop and pause for drawing media control icons (a right-pointing triange, square or two parallel vertical rectangles, resp.) inside a ring graph.

By default, the play-, pause or stop icon is drawn in the same color as the pie/ring chart itself. If combined with a ring chart (i.e. option ringWidth is set, see above), it is auto-sized to fit inside the ring, otherwise it's drawn on top of the pie and auto-sized to fit into the outer circle stroke. These defaults may be overridden by the following options (defined as properties of an object assigned to the contentPluginOptions option):

• color: string, color code. Defines the color for the control icon.
• maxSize: number. If defined, this defines a maximum constraint for the auto-sizing: For the play and stop icon, maxSize defines the maximum width and height. The play icon is always a bit larger in height and width than the others, due to the fact that the triangle icon fills much less areas and thus looks smaller.

See the content plug-ins example page for demonstrations of the plug-in and its options.

Check if complete

jquery-progresspiesvg-checkComplete.js is a script file defining a single content plug-in (checkComplete). This plug-in will draw a check mark onto a fully filled pie or into a fully closed ring (i.e. on a graph visualizing a 100% value). It won't add any content for lower values.

See the content plug-ins example page for demonstrations of the plug-in and its options.

Error icons

Imagine you set up a pie graph for visualizing the progress of a running job of your web application. You set it up once (per setupProgressPie()) to configure the looks of the pie itself and you might add the checkComplete-Plugin described above to draw a checkmark on green ground as soon as the job is completed successfully.

But maybe the job could also terminate with an error or a warning, and in these cases you would want neither the green check mark for success nor a frozen pie chart which looks like it depicts a still running job. Instead you might want to change the graph into an error or warning icon similar to the white check on green background, e.g. a white cross or exclamation mark on red or green background.

This error icons plug-in serves exactly this purpose. In difference from checkComplete, which gets setup at the beginning to show the icon as soon as the progress value reaches 100%, an error or warning icon has to be added retrospectively by an error event handler function or similar means.

If you have loaded this plug-in script file, your event handler may show a cross or exclamation mark inside a ring or on a fully filled pie, the exclamation mark may also be rendered onto a triangle hovering on top of the pie or ring graph (or inside the ring). The icon may be drawn on a colored background (e.g. red or yellow) covering the pie or ring chart completely (just like the check mark), or it may be rendered on top of a pie (without opaque background) or inside the ring, if you want the job's progress at the time the error occurred to still be visible.

See content plug-in example page for demonstrations (and JSDoc for details on all options).

Value Display

jquery-progresspiesvg-valueDisplay.js is a script file defining content plug-ins for drawing a value inside a ring graph.

This script defines two content plug-ins: percent and rawValue. Both are designed to be combined with ring charts (i.e. usage of the progressPie plug-in with the ringWidth option set) and draw a number (value) and optionally a unit label into the ring. The percent plug-in always renders a percent value (0..100).

If the chart is defined with other than percent values and a valueAdapter function is used to convert the raw value to a percent value, then the percent plug-in will render the result of the valueAdapter function, while the rawValue plug-in will draw the unconverted, raw value. The percent plug-in always adds the label "%" to the value, while the rawVale plug-in takes a unit argument defining an optional label to append to the value.

The plug-ins accept the following options (defined via contentPluginOptions):

• unit: String. Default is undefined. Only for rawValue plug-in, ignored by percent plugin: This defines the unit label to append to the raw value, e.g. "sec."
• singleLine: boolean. Default is undefined. If truthy, the unit ("%" or value of unit) will be put behind the value into the same line, otherwise (default) below the value in a second line.
• fontSizeFactor: Number. Default is 1.0 (or 0.9 if singleLine is truthy). The font-size for the value is the inner radius of the ring multiplied by this factor.
• unitFontSizeFactor: Number. Default is 0.35. Defines the font-size for the unit label.
• color: String, color code: Overrides the default color for value and unit (which is the same color as that of the pie/ring graph itself).

Instead of passing an individual options object to the progressPie plugin via its contentPluginOptions option, you may also globally alter the defaults by manipulating the object $.fn.progressPie.contentPlugin.valueDisplayDefaults.

See the content plug-ins example page for demonstrations of the plug-in and its options.

Image

jquery-progresspiesvg-image.js is a script file defining a content plug-in for inserting an external image as additional layer to the chart. The image may be used as background image or placed on top of the chart in the foreground (as do the other plug-ins above). If the image covers areas outside the actual chart's circle, it may optionally be clipped to that circle or it may be allowed to draw outside of it. In the latter case, the padding option of the chart may be used to even enlarge the area outside of the chart that may be filled with the image.

The image is automatically scaled to fit into the target area. If it is wider than the target area, then it will be horizontally centered in the higher area, leaving equally sized transparent stripes above and under the image. If the image is higher than the target area, it will be horizontally centered, leaving transparent gaps to the left and to the right.

The target area is defined as follows:

• If the chart is a pie (i.e. the ringWidth option is not set / undefined) or if the chart is a ring and the image plug-in's fullSize option (see below) is set, then the target area is the square around the chart, optionally enlarged by the padding option of the main progressPie function.
• If the chart is a ring chart (ringWidth defined) and the image plug-in's fullSize is not set, the target area is the square around the blank circle inside the ring, i.e. the target area's width and heigh are the chart's diameter minus the double ringWidth. This way, a circular image (or clipped by the clipCircle option) will fit into the free space inside the ring. By default, the image plug-in's margin option (see below) will in this case default to 1, leaving a 1px free space between the ring and the image.

The plug-in accepts the following options (via contentPluginOptions):

• href: String, mandatory. URL specifying the image file to load.
• clipCircle: boolean, defaults to false. If true, the target area (square) is reduced to a circle. The image is clipped by this circle, i.e. all areas of the image outside the circle will be invisible.
• fullSize: boolean, defaults to false. Only affects drawing on a ring chart