README

Provides the ability to control the PLINK Compatible Projectors.

PJLink Specifications: Version 1.04 2013.12.10

A list Compatible Projectors (but not exclusive, check projector for support): http://pjlink.jbmia.or.jp/english/list.html

Each project MUST be configured appropriately to accept PJLink commands. Currently the ONLY tested mode is with Authentication turned ON. Password MUST be set on projector prior to configuration of this device.

TESTED ON ## Christie Projector MODEL LWU421 ##

Usage

Command List: Power, Input, Lamp, Mute, ErrorStatus, Custom

Since at this time I was unable to filter the Sub-commands based upon the selected command, you will manually need to ensure the appropriate sub-command is selected.

Replies (messages) are in JSON format: { response: { result: 'value' } }

SubCommands Per-Command:

Power:  
	- On	Turns On Projector
	- Off	Turns Off Projector
	- Get	Gets current state of Projector
Reply will be:
	- Success
	- Out-of-Parameter
	- Unavailable
	- Projector Failure
	- Standby
	- On
	- Cooling
	- Warmup

Input:
	- RGB
	- VIDEO
	- DIGITAL
	- STORAGE
	- NETWORK
	- Get
Reply will be:
	- Success
	- Invalid Input Source
	- Unavailable
	- Display Failure
	
** FOR INPUT  the "Custom Field" needs to be set to 1 - 9 to change between input sources of the same time.

Lamp:
	- Get
Reply will be:
	- Unavailable
	- Projector Failure
	- Raw Data from Projector in form of:
	  %1LAMP=<T><SP><0 | 1><SP><T><SP><0 | 1>...
	  where:
	     T = Lighting Time of Lamp it is 1 to 5 digits
		 SP = Space
		 <0 | 1> where 0 = OFF 1 = ON
		 ... repeats for each lamp 1 to 8times.
Mute:
	- VideoON
	- VideoOFF
	- AudioON
	- AudioOFF
	- VideoAndAudioON
	- VideoAndAudioOFF
Reply will be:
	- Success
	- Out-of-Parameter
	- Unavailable
	- Projector Failure
	- Video Mute ON
	- Audio Mute ON
	- Video and Audio Mute ON
	- Video and Audio Mute OFF

ErrorStatus:
	- Get
Reply will be:
	- Normal
	- Unavailable
	- Projector Failure
	- Fan: Warning | Failure
	- Lamp: Warning | Failure
	- Temperature: Warning | Failure
	- Cover: Warning | Failure
	- Airflow: Warning | Failure
	- Temporary: Warning | Failure

	Note:  Fan, Lamp, Temperature, Cover, Airflow  and Temporary will be concatenated together when available such as:
		Fan: Warning, Cover: Failure,

Custom:
	This will send the 'custom' string AS IS to the Projector and return it's response AS IS.  note: USE AT YOUR OWN RISK