pixl-proxy

v1.0.7

Published

2 years ago

A simple HTTP proxy daemon, making use of Keep-Alives.

Downloads

0High
0Medium
0Low

jhuckaby

proxy pool daemon http queue

Overview

PixlProxy is a standalone HTTP proxy daemon written in Node.js, which can forward incoming requests to any number of destination hosts. It can serve as a front-end to your applications, providing throttling, max concurrent request limit, HTTPS, Keep-Alives, as well as a proxy for back-end service requests. It also has an in-memory queue system, for supporting asynchronous blind requests.

Features

Multiple proxy configurations, triggered by hostname, URI or header match
Separate connection pool configurations on the client and server side
Maximum concurrent requests and maximum request rate settings
Supports HTTP and HTTPS on the front and/or back ends
Supports Keep-Alives on the front and/or back ends
Supports all standard HTTP methods, including HEAD, GET, POST and PUT
Extremely fast and stable (see Benchmarks below)
Small memory footprint, even for large HTTP requests / responses
Passthrough or active content encoding (GZip, Deflate, etc.)
In-memory queue system for blind proxy requests
Optional transaction logging
Optional performance threshold logging
JSON Stats REST API

Usage

Installation

Use npm to install the module. Note that this is designed to run as a standalone background daemon, not as a library for use in another app, so take care to understand where npm installs the software. Typical installations are global using the -g switch:

sudo npm install -g pixl-proxy

To see where npm installs global packages, you can type npm root -g. Once installed globally, you should have a proxyctl command in your PATH. Use this to start, stop and otherwise control the daemon. See Command-Line Usage below.

Configuration

The configuration for PixlProxy is stored in a single JSON file on disk. It is located in the module's conf directory, and named config.json. Upon initial installation, a sample config is created for you. To edit the file using your favorite terminal editor (i.e. the EDITOR environment variable) type this:

sudo proxyctl config

If you just want to reveal the full filesystem path of the config file, you can type:

proxyctl showconfig

Here is a sample configuration file:

{
	"log_dir": "logs",
	"log_filename": "proxy-events.log",
	"pid_file": "logs/pid.txt",
	"debug_level": 9,
	
	"WebServer": {
		"http_port": 3020,
		"http_htdocs_dir": "htdocs",
		"http_server_signature": "PixlProxy 1.0",
		"http_gzip_text": false,
		"http_timeout": 30,
		"http_keep_alives": "default",
		"http_regex_json": "DISABLED",
		"http_log_requests": false,
		"http_regex_log": ".+",
		"http_recent_requests": 0,
		"http_max_connections": 255,
		"https": false,
		"http_response_headers": {
			"Via": "PixlProxy 1.0"
		}
	},
	
	"PixlProxy": {
		"serve_static_files": false,
		"stats_uri_match": "^/proxy-stats",
		"validate_ssl_certs": true,
		
		"pools": {
			
			"MyPool1": {
				"method_match": "^(GET|HEAD|POST)$",
				"host_match": "^(127\\.0\\.0\\.1|localhost)$",
				"uri_match": "^/proxy",
				
				"target_protocol": "http",
				"target_hostname": "test.myserver.com",
				"target_port": 80,
				
				"use_keep_alives": true,
				"cache_dns_sec": 60,
				"max_concurrent_requests": 10,
				"max_requests_per_sec": 1000,
				"follow_redirects": true,
				"http_timeout_ms": 30000,
				"append_to_x_forwarded_for": true,
				"retries": 5,
				"log_perf_ms": 100,
				"log_transactions": false,
				
				"http_user_agent": "PixlProxy 1.0",
				"insert_request_headers": {
					"Via": "PixlProxy 1.0"
				}
			}
		}
	}
}

The configuration is split up into three primary sections: top-level global properties, the front-end web server configuration (WebServer), and the back-end proxy configurations (PixlProxy).

Global Configuration

The top-level properties are all used by the pixl-server daemon framework. Please see the pixl-server configuration docs for a list of all the available properties. Here are brief descriptions of the ones from the sample configuration above:

| Property Name | Type | Description | |---------------|------|-------------| | log_dir | String | Directory path where event log will be stored. Can be a fully-qualified path, or relative from the PixlProxy base directory. | | log_filename | String | Event log filename, joined with log_dir. See Logging below. | | pid_file | String | Partial path to the PID file, used by the daemon (relative from the PixlProxy base directory). | | debug_level | Integer | Debug logging level, larger numbers are more verbose, 1 is quietest, 10 is loudest. |

WebServer Configuration

The properties in the WebServer object are all used by the pixl-server-web component. The web server is basically the "front-end" of the proxy, and it routes requests to the back-end. Please see the pixl-server-web configuration docs for a full description of all the properties, but here are a few that pertain specifically to PixlProxy:

| Property Name | Type | Description | |---------------|------|-------------| | http_port | Integer | This is the port to listen on. The standard web port is 80, but note that only the root user can listen on ports below 1024. | | http_htdocs_dir | String | This directory is used to serve static files, when serve_static_files mode is enabled and no proxy configuration matches a request. | | http_server_signature | String | This is the default Server header to send back to clients, when one is not included in the proxy response. | | http_gzip_text | Boolean | Set this to true to compress text-based responses that aren't already compressed. See Content-Encoding for details. | | http_timeout | Integer | This is the front-end HTTP idle timeout value in seconds. This doubles as the Keep-Alive socket timeout as well. | | http_keep_alives | String | This specifies the Keep-Alive mode in the web server. Recommend you set this to the string "default". See the pixl-server-web docs for details. | | http_regex_json | String | This should always be set to the string "DISABLED", as this web server feature is not used in PixlProxy. | | http_log_requests | Boolean | Set this to true if you want client HTTP requests to be logged as transactions. See Logging for details. | | http_regex_log | String | Use this feature to only log some requests, based on a URI regular expression match. See Logging for details. | | http_recent_requests | Integer | This is the number of recent requests to track in the stats. See JSON Stats API below for details. | | http_max_connections | Integer | This is the global maximum limit of simultaneous front-end client TCP connections. Once this limit is reached, new sockets are rejected (hard-closed), and a maxconns error is logged. | | https | Boolean | Set this to true if you want to serve HTTPS to the client (see HTTPS below for details). | | http_response_headers | Object | Use this to inject any custom HTTP response headers into all client responses for all pools. |

PixlProxy Configuration

The PixlProxy object contains the configuration for the back-end of the proxy. That is, where the incoming front-end web server requests are routed. And you can have multiple back-end configurations, targeted by various criteria, including request method, hostname and URI.

Each back-end proxy configuration is called a "pool" (because it typically pools connections via Keep-Alives), and you can have as many as you want. See Pool Configuration below for more details, but first, here are a few properties that go just inside the PixlProxy object, but aren't associated with any particular pool:

serve_static_files

If you would like the front-end web server to serve static files as well as proxy requests to a back-end, set the serve_static_files property to true. Basically, any incoming request that doesn't match a proxy pool configuration will be looked up as a static file on disk, using the web server's http_htdocs_dir path as the base directory.

If you choose to run PixlProxy as a front-end web server for static files, please check out the pixl-server-web documentation, as there are some other properties you will probably want to set in the WebServer object, including http_static_ttl and http_static_index, among others.

The default is false (disabled).

stats_uri_match

If you would like to enable the JSON Stats API, this property allows you to configure which URI activates the service. It is formatted as a regular expression wrapped in a string, e.g. ^/proxy-stats, and is matched case-sensitively. To disable the stats API, set this to Boolean false (or just omit it from your configuration, as it defaults to disabled).

For more details, see the JSON Stats API section below.

validate_ssl_certs

Normally you shouldn't have to bother with this, but if you are trying to proxy to a downstream host via HTTPS and getting certificate errors, you may have to bypass Node's SSL certification validation. To do this, set the validate_ssl_certs property to false.

Make sure you understand the security ramifications, and completely trust the host you are connecting to, and the network you are on. Skipping the certificate validation step should really only be done in special circumstances, such as testing your own internal server with a self-signed cert.

nice

The optional nice property allows you to set the process priority of the proxy at startup. This basically calls renice on the current process after forking a daemon, with the specified priority value (from -20 to +19). For example, to set the highest CPU priority for the proxy, set the nice property to -20.

Pool Configuration

Inside the PixlProxy object, you can define one or more "pools" (back-end proxy targets). These should all go into a pools object, and can be named however you like. The names are used for logging, and can also be used to target the proxy by custom header (but you can also target by other means). Example config layout:

"PixlProxy": {
	"pools": {
		"MyPool1": {
			...
		},
		"MyPool2": {
			...
		}
	}
}

Inside each of your pool objects you can define matching criteria (which HTTP requests to route), targeting information (which destination service to point to), and many other optional properties. Here is the full list:

method_match

The method_match property allows you to match incoming requests based on the HTTP request method (e.g. GET, POST, etc.). This is interpreted as a regular expression wrapped in a string matched case-insensitively, so if you wanted to match only GET and POST, you could set this to:

"MyPool1": {
	"method_match": "^(GET|POST)$"
}

By default all request methods are matched (e.g. ".+").

This is one of three criteria matching properties (along with host_match and uri_match) which allow you to route requests to your pool automatically. See the Request Routing section below for details.

host_match

The host_match property allows you to match incoming requests based on the URL hostname (i.e. Host header). This is interpreted as a regular expression wrapped in a string matched case-insensitively. Example:

"MyPool1": {
	"host_match": "^(mydomain1\\.com|mydomain2\\.com)$"
}

By default all hosts are matched (e.g. ".*" which includes a blank host as well).

This is one of three criteria matching properties (along with method_match and uri_match) which allow you to route requests to your pool automatically. See the Request Routing section below for details.

uri_match

The uri_match property allows you to match incoming requests based on the URI itself. This is interpreted as a regular expression wrapped in a string matched case-sensitively. Example:

"MyPool1": {
	"uri_match": "^/proxy"
}

By default all URIs are matched (e.g. ".+").

This is one of three criteria matching properties (along with method_match and host_match) which allow you to route requests to your pool automatically. See the Request Routing section below for details.

x_proxy_only

The x_proxy_only property, when set to true, specifies that the pool should only receive requests if they have a X-Proxy header, and it matches the Pool ID exactly. Example:

"MyPool1": {
	"x_proxy_only": true
}

See Request Routing below for details.

target_protocol

The target_protocol property specifies which protocol to use when connecting to the destination service. It should be set to either http or https. It defaults to http.

"MyPool1": {
	"target_protocol": "http"
}

target_hostname

The target_hostname property specifies which hostname to connect to for the destination service. This is a required property, and must be set in order for the proxy pool to be activated. Example:

"MyPool1": {
	"target_hostname": "myserver.mydomain.com"
}

target_port

The target_port property allows you to customize the port number when connecting to the destination service. By default, this follows the protocol, e.g. port 80 for HTTP and port 443 for HTTPS. You should only need to specify this if you are connecting to a non-standard port. Example:

"MyPool1": {
	"target_port": 8080
}

use_keep_alives

The use_keep_alives property allows you to explicitly specify whether you want to use HTTP Keep-Alives on the destination service connections, or not. The default is true (enabled). Example:

"MyPool1": {
	"use_keep_alives": false
}

cache_dns_sec

The cache_dns_sec property allows you to optionally cache the IP address of the destination service. This is so the system doesn't have to query your DNS server for each new connection. The value should be an integer, and represents the number of seconds to cache the IP address for. The default is 0 (disabled). For example, this would cache IPs for 1 minute:

"MyPool1": {
	"cache_dns_sec": 60
}

max_concurrent_requests

The max_concurrent_requests property sets the maximum amount of concurrent requests to allow through. That is, the number of parallel requests to allow hitting the back-end service at any given time. If more concurrent requests come in, they are rejected (see Throttling below for details). The default is 0 (unlimited). Example:

"MyPool1": {
	"max_concurrent_requests": 100
}

max_requests_per_sec

The max_requests_per_sec property sets the maximum number of requests to allow through per second. If this amount is reached in the space of a second, the extra requests are rejected (see Throttling below for details). The default is 0 (unlimited). Example:

"MyPool1": {
	"max_requests_per_sec": 1000
}

use_queue

The use_queue property, when set to true, activates the Queue System for the specified pool. This means that all incoming requests will be answered immediately with a special JSON response, and the back-end request is enqueued for asynchronous execution. The client is never sent the back-end service's response, so the requests are essentially "blind". Example usage:

"MyPool1": {
	"use_queue": true
}

See Queue System below for details.

max_queue_length

When use_queue is enabled, the max_queue_length property specifies the maximum number of requests that can be queued up. If the queue becomes full, additional requests are rejected with a HTTP 429 Too Many Requests error. See Queue System below for details. The default is 0 (unlimited queue size). Example:

"MyPool1": {
	"max_queue_length": 256
}

follow_redirects

The follow_redirects property allows the back-end service call to follow HTTP redirects, if one is encountered. An HTTP redirect is a HTTP 301, 302, 307 or 308, along with a Location response header. You should set this property to an integer, representing the maximum number of allowed redirects to follow. The default is false (disabled). Example:

"MyPool1": {
	"follow_redirects": 5
}

http_user_agent

The http_user_agent property allows you to set a default User-Agent header to forward along with all requests. This only applies if the client request doesn't already specify one. The default is blank (empty string). Example:

"MyPool1": {
	"http_user_agent": "My Fun Proxy"
}

http_timeout_ms

The http_timeout_ms property allows you to set an HTTP timeout for back-end service requests. This is measured as the time to first byte. See the pixl-request timeout documentation for more details on this. The value should be an integer, and is measured in milliseconds. Example (3 seconds):

"MyPool1": {
	"http_timeout_ms": 3000
}

http_basic_auth

If your back-end service requires authentication (HTTP Basic Auth) you can provide it using the http_basic_auth property. The format should be USERNAME:PASSWORD, with a colon in between. Example:

"MyPool1": {
	"http_basic_auth": "admin:12345"
}

append_to_x_forwarded_for

The append_to_x_forwarded_for property controls whether or not to append the client IP address to the X-Forwarded-For header, when forwarding the request along to the back-end service. Most "proper" reverse proxies should do this, and thus the default setting is true (enabled). However, there are cases when you may want to disable it. For example, if you are running a localhost proxy (i.e. your front-end app connects to the proxy on 127.0.0.1), then it may be useless or undesirable for your back-end service to see 127.0.0.1 as the last IP on the XFF header. Example:

"MyPool1": {
	"append_to_x_forwarded_for": false
}

preserve_host

The preserve_host property controls whether or not to pass along the Host request header to the back-end service. Most "proper" reverse proxies should do this, and thus the default setting is true (enabled). However, there are cases when you may want to disable it. When disabled, the back-end Host header gets set to the value of the target_hostname property. Example:

"MyPool1": {
	"preserve_host": false
}

resp_code_success_match

In order to determine if a request failed, the HTTP response code is checked (e.g. 200 OK). By default, all codes in the 200 - 399 range are considered a success, and anything outside of that range is an error. You can customize this success range by supplying a regular expression string in the resp_code_success_match property:

"MyPool1": {
	"resp_code_success_match": "^(2\\d\\d|3\\d\\d)$"
}

Errors are simply passed back to the client, but you may want to adjust the range to control logging. Meaning, errors are logged separately from transactions, so if your back-end service routinely returns codes outside the default 200 - 399 range, you may want to expand the success match property so they aren't logged as errors.

retries

If the request to the back-end service fails, you have the option to retry it a number of times, before ultimately giving up and returning an error to the client. This feature can be enabled by setting the retries property to a non-zero value, representing the maximum number of retries per client request. By default this feature is disabled (0). Example:

"MyPool1": {
	"retries": 5
}

In order to determine if a request succeeded or failed, the HTTP response code is checked against a customizable success range. See the resp_code_success_match property for details.

When a retry needs to occur, you may want to add a delay, as to not bombard the back-end service when it is having trouble. To control this behavior, the following additional properties are available:

| Property Name | Type | Description | |---------------|------|-------------| | error_retry_delay_base_ms | Integer | The base (minimum) retry delay, in milliseconds. | error_retry_delay_mult_ms | Integer | Multiply the number of errors in the last second by this value, and add to the base. | error_retry_delay_max_ms | Integer | The maximum delay in milliseconds (never exceed this amount).

All three of these properties default to 0.

The idea here is that the retry delay is an exponential back-off algorithm, based on previous second's error count. So for each retry operation, it calculates the delay by starting with the base value (error_retry_delay_base_ms), then multiplying error_retry_delay_mult_ms by the number of errors received in the previous second, and adding that to the base. Finally, the base + multiplication is clamped by the maximum (error_retry_delay_max_ms). In this way as more and more errors occur, you can have the retry delay increase, reducing the bashing of the back-end service. Here is an example configuration:

"MyPool1": {
	"retries": 10,
	"error_retry_delay_base_ms": 100,
	"error_retry_delay_mult_ms": 20,
	"error_retry_delay_max_ms": 5000
}

So in this example we allow up to 10 retries per client request, and have a base (minimum) delay of 100ms per retry. Then, if we recorded any errors during the last second, we multiply that error count by 20ms and add the result to the base value, not to exceed 5 seconds.

log_perf_ms

The log_perf_ms property allows you to set a performance threshold, above which all back-end service requests will be logged (including all the HTTP performance metrics). This value is measured as the total request time to the back-end service, in milliseconds. So for example, if you set this property to 100, then all back-end requests that take 100ms and over will be logged as transactions. Example configuration:

"MyPool1": {
	"log_perf_ms": 100
}

See Logging below for more details.

log_transactions

The log_transactions property, when set to true, will log every back-end service request as a transaction, to the event log. A transaction simply means that the category column is set to transaction instead of debug. All transactions have the full request URL, response code, response headers, and performance metrics. Example configuration:

"MyPool1": {
	"log_transactions": true
}

Here is an example transaction log entry:

[1508477033.311][2017-10-19 22:23:53][joedark.local][MyPool1][transaction][http][Proxy Request Completed: HTTP 200 OK][{"url":"http://myservice.com:3012/sleep?ms=1000","http_code":200,"http_message":"OK","resp_headers":{"content-type":"application/json","x-joetest":"1234","server":"Test Server 1.0","content-length":"54","date":"Fri, 20 Oct 2017 05:23:53 GMT","connection":"keep-alive"},"perf_metrics":{"scale":1000,"perf":{"total":1015.569,"send":0,"connect":8.521,"wait":1004.409,"receive":1.821},"counters":{"bytes_sent":135,"bytes_received":228}},"request_id":""}]

See Logging below for more details.

Note that you can also log all incoming requests at the web server level (this is across all pools). See the pixl-server-web logging docs for details on enabling this.

log_errors

The log_errors property controls whether back-end service HTTP errors are logged. The default is true (enabled). If you want to disable this, set the property to false:

"MyPool1": {
	"log_errors": false
}

Here is an example error log row:

[1508530714.066][2017-10-20 13:18:34][joedark.local][MyPool1][error][500][Proxy Request Error: HTTP 500 Internal Server Error][{"url":"http://myservice.com:3012/sleep?ms=1000","http_code":500,"http_message":"Internal Server Error","resp_headers":{},"perf_metrics":{"scale":1000,"perf":{"total":0.917},"counters":{}},"error_details":"Error: Connection Refused: Failed to connect to host: myservice.com","request_id":""}]

The proxy determines if a request is an error based on the response code. See the resp_code_success_match property for details.

See Logging below for more details.

insert_request_headers

The insert_request_headers object allows you include additional HTTP headers along with the request to the back-end service. These will replace any existing headers with the same names (case-sensitive). Example:

"MyPool1": {
	"insert_request_headers": {
		"Via": "PixlProxy 1.0"
	}
}

insert_response_headers

The insert_response_headers object allows you include additional HTTP headers along with the response back to the client. These will replace any existing headers with the same names (case-sensitive). Example:

"MyPool1": {
	"insert_response_headers": {
		"Via": "PixlProxy 1.0"
	}
}

degraded_perf_monitor

The degraded_perf_monitor property activates the Degraded Performance Monitoring feature, which will monitor the average performance of your back-end service, and if latency reaches a specified threshold, the proxy will include an additional header in all requests. This can give your back-end service a "hint" that the server is in trouble. Example configuration:

"MyPool1": {
	"degraded_perf_monitor": true,
	"degraded_min_avg_ms": 100,
	"degraded_min_req_sec": 10,
	"degraded_min_uptime_sec": 60
}

See the Degraded Performance Monitoring section for more details.

Advanced Properties

Here are a few advanced properties that you should probably never have to worry about, but are listed here for reference and special use cases.

scrub_request_headers

Note: This is an advanced property, and probably never needs to be changed from its default value.

The scrub_request_headers property contains a regular expression wrapped in a string, which is matched against all incoming client HTTP request headers. If any match (case-insensitively), they are scrubbed (removed) from the downstream back-end service request. Here is the default value:

"MyPool1": {
	"scrub_request_headers": "^(host|x\\-proxy|x\\-proxy\\-\\w+|expect|content\\-length|connection)$"
}

The reason for scrubbing these headers it that they get either removed or replaced in the back-end request, so it is useless and often times an error to include them. For example, the Connection header may differ between the client and back-end requests.

scrub_response_headers

Note: This is an advanced property, and probably never needs to be changed from its default value.

The scrub_response_headers property contains a regular expression wrapped in a string, which is matched against all outgoing HTTP response headers. If any match (case-insensitively), they are scrubbed (removed) from the client response. Here is the default value:

"MyPool1": {
	"scrub_response_headers": "^(transfer\-encoding)$"
}

The Transfer-Encoding header is scrubbed because it is controlled by the underlying Node.js HTTP library, and may be added or not, as it is deemed necessary. It is usually an error to "carry over" this header from one request to another.

min_stream_size

Note: This is an advanced property, and probably never needs to be changed from its default value.

The min_stream_size property represents the cutoff point where all HTTP responses larger than this value will be piped using streams. The default value is 128K, but the property is expressed raw bytes. Example:

"MyPool1": {
	"min_stream_size": 131072
}

This exists because it is typically faster to use a memory buffer to proxy the back-end response payload to the client, but doing this with large payloads can cause memory usage spikes, and sometimes even socket errors. So if any response payload is over this size (or has no Content-Length header at all) a stream is used instead of a buffer.

throttle_requeue_delay_ms

Note: This is an advanced property, and probably never needs to be changed from its default value.

The throttle_requeue_delay_ms property represents the delay in milliseconds before a throttled request is re-enqueued. The default value is 100ms. This is non-zero because if we were to immediately re-enqueue all throttled requests, it would "bash" the queue during the second that was already maxed out. Meaning, the requests would be in an constant loop until the next second comes around, and the queue allows in another chunk of requests.

"MyPool1": {
	"throttle_requeue_delay_ms": 100
}

Command-Line Usage

PixlProxy comes with a simple command-line control script called proxyctl. It should already be symlinked into your PATH, assuming you installed the module via sudo npm install -g pixl-proxy. It accepts a single command-line argument to start, stop, and a few other things. Examples:

proxyctl start
proxyctl stop
proxyctl restart

Note that if you have your web server listening on port 80, 443, or any port under 1,024, then you'll need to run these commands as root.

Here is the full command list:

| Command | Description | |---------|-------------| | help | Show usage information. | | start | Start PixlProxy as a background service. | | stop | Stop PixlProxy and wait until it actually exits. | | restart | Calls stop, then start (hard restart). | | status | Checks whether PixlProxy is currently running. | | debug | Start the service in debug mode (see Debugging below). | | config | Edit the config file in your editor of choice (via EDITOR environment variable). | | showconfig | Reveal the location of the config file path on disk. | | boot | Install PixlProxy as a startup service (see Server Reboot below). | | unboot | Remove PixlProxy from the startup services. |

Debugging

To start PixlProxy in debug mode, issue this command:

proxyctl debug

This will start the service as a foreground process (not a daemon), and echo the event log straight to the console. This is a great way to troubleshoot issues. Hit Ctrl-C to exit.

Note that you may have to use sudo or become the root user to start the service, if your web server is listening on any port under 1,024 (i.e. port 80).

Server Reboot

If you want to have the PixlProxy daemon start up automatically when your server reboots, use you can use the special boot command, which will register it with the operating system's startup service (i.e. init.d on Linux, LaunchAgent on macOS, etc.). You only need to type this once:

sudo proxyctl boot

To unregister and remove PixlProxy from the server startup services, type this:

sudo proxyctl unboot

See the pixl-boot module for more details on how this works.

Upgrading

To upgrade to the latest PixlProxy version, you can use the npm update command. Your local configuration file will not be touched. Assuming you installed PixlProxy globally, and it is currently running, then issue these commands to upgrade to the latest stable:

sudo proxyctl stop
sudo npm update -g pixl-proxy
sudo proxyctl start

Request Routing

PixlProxy offers several methods for routing incoming requests to your back-end services. You can automatically match pools based on request method, URI, hostname, or a custom X-Proxy header value. Alternatively, if you just have a single pool that should match everything, you can do that as well. These methods are all detailed in the following four sections:

Single Pool

In the simplest case, you have a single back-end service that all requests should route to. To set this up, define a single pool entry, omit all matching criteria, include the target hostname and any other settings you need, and you're good to go. Minimal example:

"PixlProxy": {
	"pools": {
		"MyPool1": {
			"target_protocol": "http",
			"target_hostname": "test.myserver.com",
			"target_port": 80
		}
	}
}

Request Matching

If you have multiple back-end destinations that you want to route requests to, you can any of the following three pool properties to match incoming requests: method_match, host_match and/or uri_match. Example:

"PixlProxy": {
	"pools": {
		"MyPool1": {
			"method_match": "^GET$",
			"host_match": "^localhost$",
			"uri_match": "^/proxy",
			
			"target_hostname": "test.myserver.com"
		}
	}
}

Here we are specifying all three match properties, so the request method must be GET, and the hostname must be localhost, and and URI must start with /proxy. Then and only then will the request be routed to the test.myserver.com back-end service. Any match properties that are omitted mean "match all" in that category.

X-Proxy Header

Another way to route incoming requests is to use a X-Proxy request header. If this request header is present, and matches any of your Pool IDs, it will be routed there (note that any method/hostname/URI criteria must also match, if specified).

Routing using the X-Proxy header makes the most sense when you also include the x_proxy_only setting. Setting this pool property to true means that only requests that include the X-Proxy header (with a value that matches the Pool ID) will be routed. Example pool configuration:

"PixlProxy": {
	"pools": {
		"MyPool1": {
			"x_proxy_only": true,
			"target_hostname": "test.myserver.com"
		}
	}
}

So in this case requests will only be routed to the pool if they include a X-Proxy header, and it is set to MyPool1 exactly (case-sensitive). Example HTTP request which would be routed to our pool:

GET /proxy HTTP/1.1
Host: localhost
User-Agent: MyTestClient/1.0
X-Proxy: MyPool1

Default Pool

If you want to have a "catch-all" pool, which will handle all requests that don't match any other pool, simply give it an ID of default. This is a special ID that is only considered last, after all other pools are checked for a matching request. Example:

"PixlProxy": {
	"pools": {
		"default": {
			"target_protocol": "http",
			"target_hostname": "test.myserver.com",
			"target_port": 80
		}
	}
}

The difference between the default pool and a normal pool without any matching criteria is the default pool is always checked last (i.e. lowest priority). All other pools have effectively equal priority, and the check order is undefined.

Note that the default pool and serve_static_files are mutually exclusive features.

Throttling

PixlProxy offers several ways to throttle requests to your back-end services. You can set limits on the number of requests per second, as well as the number of concurrent requests. Any requests that exceed your limits are rejected immediately.

To throttle based on the request rate, set the max_requests_per_sec property. Separately or in addition to this, you can also throttle by the number of concurrent requests, by setting the max_concurrent_requests property. If you use both, then whichever is reached first becomes the limiting factor. Example configuration:

"PixlProxy": {
	"pools": {
		"MyPool1": {
			"target_hostname": "test.myserver.com",
			"max_concurrent_requests": 10,
			"max_requests_per_sec": 1000
		}
	}
}

By default there are no request rate or concurrency limits. However, see Max Client Connections below. Incoming requests over your limits will be rejected with a HTTP 429 Too Many Requests response.

Max Client Connections

In addition to the throttling methods available in each pool, you can also limit connections globally at the web server level, by setting the http_max_connections property in the WebServer object. This is a hard upper limit of allowed concurrent client-side connections (sockets). If this limit is reached, new client connections are rejected immediately (by a socket hard-close). Please set this property with extreme care. It defaults to 0 (infinite, no limit).

Note that the http_max_connections should always be equal or greater than all of your pool max_concurrent_requests values added together. Remember, this applies to the whole proxy server globally, and every queued request will have its own client socket connection open.

Queue System

If you have a use case where the client doesn't need to wait for the response from the back-end service, you can optionally send it "blind". That is, the client request will be immediately answered, but the actual back-end request is queued up, and will execute in the background, keeping things within your throttling limits. This is basically an in-memory message queue, except that all messages are HTTP requests.

To use this feature, include a use_queue property in your pool configuration, and set it to true. This tells PixlProxy that all requests should be enqueued, and executed in the background, returning a response to the client instantly. The client response is a JSON document which will have a unique request_id identifier. Example HTTP request:

GET /proxy HTTP/1.1
Host: localhost
User-Agent: MyTestClient/1.0
X-Proxy: MyPool1

And here is an example JSON response, sent back to the client immediately (before the back-end request is actually made):

{
	"code": 0,
	"description": "Proxy request enqueued successfully.",
	"request_id": "ef233cc0cf219ec14eb629be00bcf52bed9bc1a556d643ff89ffb76eaa0a4dd3"
}

The request_id value can be used to correlate your request with the PixlProxy logs at a later time. For example, if the back-end request ultimately fails, it will be logged as an error (assuming you have log_errors enabled), and that log entry will include the corresponding request_id, so you can match it up with your application data.

The same goes for successfully completed back-end requests. If you have log_transactions enabled, your queued back-end request will be logged upon completion, that that log entry will include the corresponding request_id that was returned to your client. Example successful transaction from a queued request:

[1508560380.348][2017-10-20 21:33:00][joedark.local][MyPool1][transaction][http][Proxy Request Completed: HTTP 200 OK][{"url":"http://127.0.0.1:3012/sleep?ms=1000","method":"GET","req_headers":{"host":"127.0.0.1:3020","user-agent":"curl/7.54.0","accept":"*/*","x-proxy-queue":"1"},"http_code":200,"http_message":"OK","resp_headers":{"content-type":"application/json","x-joetest":"1234","server":"Test Server 1.0","content-length":"54","date":"Sat, 21 Oct 2017 04:33:00 GMT","connection":"keep-alive"},"perf_metrics":{"scale":1000,"perf":{"total":1031.547,"send":0,"connect":10.345,"wait":1018.643,"receive":1.621},"counters":{"bytes_sent":135,"bytes_received":228}},"request_id":"ef233cc0cf219ec14eb629be00bcf52bed9bc1a556d643ff89ffb76eaa0a4dd3"}]

See Logging below for more details on the log format.

Keep in mind that all queued requests are held in memory, so it is recommended you set your pool's max_queue_length accordingly, and watch your server's memory usage. If you are queuing HTTP POSTs that include file uploads, those are stored to disk temporarily (in the web server's http_temp_dir directory), and not stored in RAM.

Note: This queue system should not be used for mission-critical data. Queued requests can be lost if the proxy server is shut down improperly (crash or power loss), or your back-end service goes down and you exhaust all your retries, or the queue fills up. You should only consider using this system for non-essential background requests that you simply don't want your client to wait for, but your application will survive if some requests ultimately fail to reach the destination.

JSON Stats API

PixlProxy keeps internal statistics on throughput and performance, which are logged every second (see Logging below). However, if you also want to expose this data via a HTTP JSON REST service, you can do this by setting the stats_uri_match property, which both enables the feature, and sets its URI endpoint. Note that this property needs to live in the outer PixlProxy object, and is not associated with a particular pool. Example:

"PixlProxy": {
	"stats_uri_match": "^/proxy-stats",
	"pools": { /* your pools */ }
}

This would enable the Stats API on the /proxy-stats URI endpoint. Hit it with any HTTP GET request, and it'll emit stats in the response. Add ?pretty=1 if you would like the JSON to be pretty-printed. Example:

{
	"pools": {
		"MyPool1": {
			"counters": {
				"requests": 368,
				"bytes_sent": 104144,
				"bytes_received": 93104,
				"cur_pending_reqs": 0,
				"cur_executing_reqs": 1,
				"cur_client_conns": 2,
				"cur_server_conns": 1
			},
			"minimums": {
				"total": 0.563,
				"send": 0.106,
				"wait": 0.406,
				"receive": 0.025
			},
			"maximums": {
				"total": 22.753,
				"send": 2.186,
				"wait": 20.724,
				"receive": 0.111
			},
			"averages": {
				"total": 0.83,
				"send": 0.13,
				"wait": 0.64,
				"receive": 0.04
			},
			"scale": 1000,
			"cpu_pct": 2.56
		}
	},
	"web": { /* see below */ }
}

As you can see, the stats are in a top-level pools object, and they are split out for each of your active pools. In this case we only have one, MyPool1, which houses all of its own stats within. The reported stats are always for exactly one full second of time (never a partial second, so it's always for the last full second). In this way you can easily calculate things like requests per second, bytes per second, etc.

The counters object contains simple counters that have accumulated for exactly one second. Here are the properties you will find there:

| Property Name | Description | |---------------|-------------| | requests | The total number of back-end requests served for the last second (i.e. current requests per second). | | bytes_sent | The total number of bytes sent to the back-end service for the last second. | | bytes_received | The total number of bytes received from the back-end service for the last second. | | cur_pending_reqs | The current number of pending requests in the queue, waiting to be sent. | | cur_executing_reqs | The current number of requests being executed (requests in progress to the back-end service). | | cur_client_conns | The current number of open client socket connections for all pools. | | cur_server_conns | The current number of open back-end service connections for this pool. |

Note that the cur_client_conns metric is measured at the web server level, so it is actually showing the number of open sockets across all pools, not necessarily just the current pool. All other counters are for the current pool.

The minimums, maximums and averages objects contain performance metrics for the last second. The properties within these objects represent a particular phase of the downstream HTTP request to the back-end service, and its elapsed time in milliseconds. For example, in the JSON stats shown above, the average total time for all the back-end service requests was 0.83ms. However, the longest request took 22.753ms total time, as you can see in the maximums section.

Here are all the performance metrics that are tracked, and you may see in the minimums, maximums and averages objects:

| Metric | Description | |--------|-------------| | dns | Time to resolve the hostname to an IP address via DNS. Omitted if cached, or you specify an IP on the URL. | | connect | Time to connect to the remote socket (omitted if using Keep-Alives and reusing a host). | | send | Time to send the request data (typically for POST / PUT). Also includes SSL handshake time (if HTTPS). | | wait | Time spent waiting for the server response (after request is sent). | | receive | Time spent downloading data from the server (after headers received). | | decompress | Time taken to decompress the response (if encoded with Gzip or Deflate). | | total | Total time of the entire HTTP transaction. |

For more details on performance metrics, please see the pixl-request performance metrics docs.

The cpu_pct property represents the percentage of one CPU core used by the proxy process during the last full second. This is calculated by calling Node's process.cpuUsage() function, and comparing it to the value from the previous second. The value is a combination of both the "user" and "system" time. This feature is only available in Node v6.1.0 and up.

The JSON Stats API is protected by an ACL, so only "internal" requests can access it. This is accomplished by using the ACL feature in the web server, for the stats API endpoint. By default, the ACL is restricted to localhost, plus the IPv4 private reserved space, but you can customize it by including a http_default_acl property in your WebServer configuration. Please see the pixl-server-web ACL documentation for more details on this.

Web Server Stats

The PixlProxy Stats API also includes stats from the web server, which will be in the web object. Here is an example of what that looks like:

"web": {
	"server": {
		"uptime_sec": 91,
		"hostname": "joedark.local",
		"ip": "192.168.3.20",
		"name": "PixlProxy",
		"version": "1.0.0"
	},
	"stats": {
		"total": {
			"st": "mma",
			"min": 1.088,
			"max": 25.037,
			"total": 590.8020000000001,
			"count": 368,
			"avg": 1.6054402173913047
		},
		"read": {
			"st": "mma",
			"min": 0.003,
			"max": 0.012,
			"total": 1.2879999999999965,
			"count": 368,
			"avg": 0.0034999999999999905
		},
		"process": {
			"st": "mma",
			"min": 0.829,
			"max": 24.602,
			"total": 460.7950000000003,
			"count": 368,
			"avg": 1.2521603260869574
		},
		"write": {
			"st": "mma",
			"min": 0.205,
			"max": 19.688,
			"total": 125.00300000000013,
			"count": 368,
			"avg": 0.33968206521739164
		},
		"bytes_in": 105248,
		"bytes_out": 99728,
		"num_requests": 368,
		"cur_sockets": 2
	},
	"sockets": {
		"c3001": {
			"state": "processing",
			"ip": "::ffff:127.0.0.1",
			"proto": "http",
			"port": 3020,
			"elapsed_ms": 0.212232,
			"num_requests": 6,
			"bytes_in": 3132,
			"bytes_out": 50911,
			"ips": [
				"::ffff:127.0.0.1"
			],
			"method": "GET",
			"uri": "/proxy-stats?pretty=1",
			"host": "127.0.0.1:3020"
		},
		"c11952": {
			"state": "idle",
			"ip": "::ffff:127.0.0.1",
			"proto": "http",
			"port": 3020,
			"elapsed_ms": 0,
			"num_requests": 0,
			"bytes_in": 0,
			"bytes_out": 0
		}
	},
	"recent": []
}

Please see the pixl-server-web stats documentation for more details on this data.

Keep-Alives

PixlProxy supports HTTP Keep-Alives on both the front and back ends. It is highly recommended you use this wherever possible, but understandable that there are cases where you will want to disable it. In this case you have control over both ends of the proxy.

For enabling Keep-Alives on the front-end, set the web server's http_keep_alives property in the WebServer configuration object. This should be set to one of three strings, which specify different Keep-Alive behaviors:

| Value | Description | |-------|-------------| | "default" | This enables Keep-Alives for all incoming connections by default, unless the client specifically requests a close connection. | | "request" | This disables Keep-Alives for all incoming connections by default, unless the client specifically requests a Keep-Alive connection. | | "close" | This completely disables Keep-Alives for all incoming connections. |

Example configuration:

"WebServer": {
	"http_keep_alives": "default"
}

See the pixl-server-web docs for more details.

For Keep-Alives on the back-end, you can configure this separately for each of your pools. Simply set the use_keep_alives property. It defaults to true, so you only need to specify if you want to disable it. Example configuration:

"MyPool1": {
	"use_keep_alives": false
}

HTTPS

PixlProxy supports HTTPS on both the front and back ends. To enable it on the front-end web server, you will need an SSL certificate for your domain (both .crt and .key files), and then you need to set a few extra properties in the WebServer configuration object:

| Property Name | Type | Description | |---------------|------|-------------| | https | Boolean | Set this to true to enable front-end HTTPS support in the web server. | | https_port | Integer | Set this to the port you want to listen for HTTPS requests on (443 is the default). | | https_cert_file | String | Set this to a filesystem path to your .crt file for your SSL certificate. | | https_key_file | String | Set this to a filesystem path to your .key file for your SSL certificate. |

Note that the web server listens for HTTPS requests in addition to normal HTTP requests. If you only want to serve HTTPS, then set the https_force property, which will redirect all incoming HTTP requests to HTTPS.

See the pixl-server-web HTTPS documentation for more details.

When an HTTPS request is received, a special request header is injected into the forwarded back-end request:

X-Forwarded-Proto: https

This is so your back-end service can detect that HTTPS/SSL was used on the front-end, even if the proxy-to-back-end request itself was plain HTTP. This is a de-facto standard header used by load balancers such as Amazon Web Services' Elastic Load Balancer.

For HTTPS on the back-end, all you have to do is set your target_protocol pool property to https. This will use HTTPS when connecting to your back-end service (i.e. it'll construct https:// URLs).

Please note that if you need to connect to a back-end HTTPS service that uses self-signed SSL certificates, you may have to set the validate_ssl_certs property to false.

Content-Encoding

PixlProxy supports both passive and active compression (i.e. content encoding). Passive compression is automatic, meaning if the back-end service returns a compressed (encoded) response, this is passed directly through to the client, without touching it. However, if you also want active compression, meaning you want PixlProxy to compress an otherwise uncompressed text response, you can do this by using some features provided by pixl-server-web.

These three properties control active compression for HTTP responses, and all should go into the WebServer configuration object:

| Property Name | Type | Description | |---------------|------|-------------| | http_gzip_text | Boolean | Set this to true to compress text-based responses that aren't already compressed. | | http_regex_text | String | This is a regular expression matched against the response Content-Type header. Only matching responses are compressed. | | http_gzip_opts | Object | This allows you to customize the Gzip settings, such as compression level and memory usage. |

Note that active compression only kicks in if the response isn't already compressed, and the client declares support via the Accept-Encoding request header. If this header is missing or doesn't include gzip then PixlProxy won't compress the response.

Degraded Performance Monitoring

PixlProxy can optionally monitor the performance of the your downstream service, and provide a real-time indicator if the average latency increases beyond a specific threshold. The idea here is, if your server is struggling, you can have the proxy send a "hint" to the downstream service, informing it that performance is degraded. The service can then take whatever actions it deems appropriate, such as reduce functionality, skip certain requests, etc.

The indicator itself is a downstream HTTP header called X-Degraded, and will be inserted into requests to your back-end service, if average latency is beyond a value you specify. Example header:

X-Degraded: true

To activate the feature, set the degraded_perf_monitor property to true in your pool's configuration. Example:

"MyPool1": {
	"degraded_perf_monitor": true,
	"degraded_min_avg_ms": 100,
	"degraded_min_req_sec": 10,
	"degraded_min_uptime_sec": 60
}

As you can see above, there are three additional properties you can set to tune the feature. Here are descriptions of those:

| Property Name | Type | Description | |---------------|------|-------------| | degraded_min_avg_ms | Number | The average request elapsed time threshold, in milliseconds. If the average request time reaches or exceeds this number, the X-Degraded header will be included in all downstream requests. | | degraded_min_req_sec | Number | Optionally limit the feature so that the header will only be included if the average number of requests per second is equal to or greater than the specified value. | | degraded_min_uptime_sec | Number | Optionally limit the feature so that the header will only be included if the proxy uptime is over the specified number of seconds. |

So in the configuration example shown above, the proxy would only consider performance to be in a degraded state (and start including the header) if all three conditions are met:

The average total time for downstream requests, measured over the previous full second, is equal to or greater than 100ms.
The incoming traffic rate is equal to or grater than 10 requests per second.
The proxy has been up and running for at least 60 seconds.

The idea with degraded_min_req_sec is that you may want to skip the degraded header hint if the server is only receiving a very small amount of traffic. In these cases the average request time may be inaccurate, because it has so few requests to calculate the average from. Similarly, with degraded_min_uptime_sec, you can disable the feature if the proxy was only just started, as your back-end service may also still be starting up, and not yet running at full speed.

Logging

PixlProxy uses the logging system built into pixl-server. Essentially there is one combined "event log" which contains debug messages, errors and transactions. The component column will be set to either PixlProxy, WebServer or one of your own Pool IDs. Most debug messages will be pool-specific.

The general logging configuration is controlled by these three top-level global properties:

| Property Name | Type | Description | |---------------|------|-------------| | log_dir | String | Directory path where event log will be stored. Can be a fully-qualified path, or relative from the PixlProxy base directory. | | log_filename | String | Event log filename, joined with log_dir. | | debug_level | Integer | Debug logging level, larger numbers are more verbose, 1 is quietest, 10 is loudest. |

The global debug_level property controls the verbosity of debug log messages, but errors and transactions are controlled by the following pool-specific properties:

| Property Name | Type | Description | |---------------|------|-------------| | log_transactions | Boolean | Set this to true to log all requests as transactions. | | log_perf_ms | Integer | Log transactions if the total back-end request time exceeds this limit (in milliseconds). | | log_errors | Boolean | By default all errors are logged. Set this to false to disable error logging. |

Debug Log

Log entries with the category set to debug are debug messages, and have a verbosity level from 1 to 10.

Here is an example log excerpt showing a typical startup with one pool (MyPool1). In all these log examples the first 3 columns (hires_epoch, date and hostname) are omitted for display purposes. The columns shown are component, category, code, msg, and data.

[PixlProxy][debug][1][PixlProxy v1.0.0 Starting Up][]
[PixlProxy][debug][2][Server IP: 10.0.1.4, Daemon PID: 26024][]
[PixlProxy][debug][3][Starting component: WebServer][]
[WebServer][debug][2][pixl-server-web v1.0.25 starting up][]
[WebServer][debug][2][Starting HTTP server on port: 3020][]
[PixlProxy][debug][3][Starting component: PixlProxy][]
[PixlProxy][debug][3][PixlProxy engine starting up][["/usr/local/bin/node","/Users/jhuckaby/node_modules/pixl-proxy/lib/main.js","--debug","--echo"]]
[PixlProxy][debug][4][Setting up pool: MyPool1][{"target_protocol":"http","target_hostname":"127.0.0.1","target_port":3012,"use_keep_alives":true,"cache_dns_sec":60,"max_concurrent_requests":10,"max_requests_per_sec":1000,"max_queue_length":10,"follow_redirects":false,"http_timeout_ms":30000,"append_to_x_forwarded_for":false,"retries":5,"log_perf_ms":100,"log_transactions":1}]
[WebServer][debug][3][Adding custom URI handler: /^\/proxy-stats/: PixlProxy Stats][]
[WebServer][debug][3][Adding custom URI handler: /.+/: PixlProxy][]
[PixlProxy][debug][2][Startup complete, entering main loop][]

Here are all the debug entries for an example request (with the debug level set to 9):

[WebServer][debug][8][New incoming HTTP connection: c1][{"ip":"::ffff:127.0.0.1","num_conns":1}]
[WebServer][debug][8][New HTTP request: GET /sleep?ms=1000 (::ffff:127.0.0.1)][{"socket":"c1","version":"1.1"}]
[WebServer][debug][9][Incoming HTTP Headers:][{"host":"127.0.0.1:3020","user-agent":"curl/7.54.0","accept":"*/*"}]
[WebServer][debug][6][Invoking handler for request: GET /sleep: PixlProxy][]
[MyPool1][debug][9][Enqueuing request: GET /sleep?ms=1000][{"host":"127.0.0.1:3020","user-agent":"curl/7.54.0","accept":"*/*"}]
[MyPool1][debug][8][Proxying GET request: http://127.0.0.1:3012/sleep?ms=1000][{"User-Agent":"curl/7.54.0","Accept":"*/*","Via":"PixlProxy 1.0"}]
[MyPool1][debug][5][Creating new proxy socket: p1][]
[MyPool1][debug][8][Proxy request completed: HTTP 200 OK][{"resp_headers":{"content-type":"application/json","x-joetest":"1234","server":"Test Server 1.0","content-length":"54","date":"Sat, 21 Oct 2017 23:39:29 GMT","connection":"keep-alive"},"perf_metrics":{"scale":1000,"perf":{"total":1029.285,"send":0,"connect":9.124,"wait":1017.34,"receive":1.958},"counters":{"bytes_sent":135,"bytes_received":228}}}]
[WebServer][debug][9][Sending HTTP response: 200 OK][{"Content-Type":"application/json","X-JoeTest":"1234","Server":"Test Server 1.0","Content-Length":"54","Date":"Sat, 21 Oct 2017 23:39:29 GMT","Connection":"keep-alive","Via":"PixlProxy 1.0"}]
[WebServer][debug][9][Request complete][]
[WebServer][debug][9][Response finished writing to socket][]
[WebServer][debug][9][Request performance metrics:][{"scale":1000,"perf":{"total":1038.706,"read":0.263,"process":1034.178,"write":2.965},"counters":{"bytes_in":91,"bytes_out":246,"num_requests":1}}]
[WebServer][debug][9][Keeping socket open for keep-alives: c1][]
[WebServer][debug][8][HTTP connection has closed: c1][{"ip":"::ffff:127.0.0.1","total_elapsed":1045,"num_requests":1,"bytes_in":91,"bytes_out":246}]

Here is an example of performance metrics, which are logged every second for every pool (if there is any activity at all). This is logged as a level 2 debug event:

[MyPool1][debug][2][Average Performance Metrics][{"scale":1000,"counters":{"requests":1,"bytes_sent":135,"bytes_received":228,"cur_pending_reqs":0,"cur_executing_reqs":0,"cur_client_conns":0,"cur_server_conns":1},"minimums":{"total":1020.389,"send":0,"connect":12.133,"wait":1005.918,"receive":1.521},"maximums":{"total":1020.389,"send":0,"connect":12.133,"wait":1005.918,"receive":1.521},"averages":{"total":1020.38,"send":0,"connect":12.13,"wait":1005.91,"receive":1.52},"cpu_pct":0.256}]

And here is the shutdown sequence:

[PixlProxy][debug][1][Caught SIGINT][]
[PixlProxy][debug][1][Shutting down][]
[PixlProxy][debug][3][Stopping component: PixlProxy][]
[PixlProxy][debug][2][Shutting down PixlProxy][]
[MyPool1][debug][3][Shutting down pool: MyPool1][{"current_pending_requests":0,"current_executing_requests":0}]
[MyPool1][debug][3][Pool shutdown complete][]
[PixlProxy][debug][3][Stopping component: WebServer][]
[WebServer][debug][2][Shutting down HTTP server][]
[PixlProxy][debug][2][Shutdown complete, exiting][]
[WebServer][debug][3][HTTP server has shut down.][]
[MyPool1][debug][5][Proxy socket has closed: p1][]

Error Log

In general, all errors are client HTTP responses. The code column is the HTTP response code (e.g. 404, 500), and the msg column will contain details about the error (as well as the data column in most cases). Here is an example error:

[MyPool1][error][500][Proxy Request Error: HTTP 500 Internal Server Error][{"url":"http://127.0.0.1:3012/sleep?ms=100

Published

Vulnerabilities

Links

Maintainers

Keywords

Readme

Overview

Features

Table of Contents

Usage

Installation

Configuration

Global Configuration

WebServer Configuration

PixlProxy Configuration

serve_static_files

stats_uri_match

validate_ssl_certs

nice

Pool Configuration

method_match

host_match

uri_match

x_proxy_only

target_protocol

target_hostname

target_port

use_keep_alives

cache_dns_sec

max_concurrent_requests

max_requests_per_sec

use_queue

max_queue_length

follow_redirects

http_user_agent

http_timeout_ms

http_basic_auth

append_to_x_forwarded_for

preserve_host

resp_code_success_match

retries

log_perf_ms

log_transactions

log_errors

insert_request_headers

insert_response_headers

degraded_perf_monitor

Advanced Properties

scrub_request_headers

scrub_response_headers

min_stream_size

throttle_requeue_delay_ms

Command-Line Usage

Debugging

Server Reboot

Upgrading

Request Routing

Single Pool

Request Matching

X-Proxy Header

Default Pool

Throttling

Max Client Connections

Queue System

JSON Stats API

Web Server Stats

Keep-Alives

HTTPS

Content-Encoding

Degraded Performance Monitoring

Logging

Debug Log

Error Log