nodealarmproxy
v1.0.2
Published
Use this to communcate to an envisalink 3 module for home alarm monitoring.
Downloads
24
Readme
##Setup##
npm install nodealarmproxy
the nap-example.js
shows a setup configuration. Replace the init parameters with your own.
Available commands:
initConfig(Object)
will create the server and a proxy for other things to connect to (Envisalink only allows one connection... this allows for multiple connections via proxy). The object needs to be of the form:
{ password:'password', //required
serverpassword:'serverpassword', //optional, will re-use password if not provided
actualhost:config.host, //required
actualport:config.port, //optional, will use default port if not provided
serverhost:'0.0.0.0', //optional, will use '0.0.0.0' if not provided
serverport:config.port, //optional, will use default port if not provided
zone:7, //required, this is the number of sensors you have
partition:1, //required, this is the number of partitions... usually 1
proxyenable:true, //enable the proxy or not
atomicEvents:false //optional, will default to false. If true, specific zone/partition/user events will be broadcast.
}
getCurrent()
will tell the nodealarmproxy to transmit the last known values.
manualCommand(command)
will send a command to the Envisalink 3 (do not include the checksum). Command will be a string based on the envisalink 3 third party interface.
Note: If you don't want to run the proxy, set proxyenable:false
or omit it entirely
Note: My config file has:
exports.password = ''; //Envisalink password
exports.serverpassword=''; //Password you want for proxy server
exports.host = ''; //host IP Address
//exports.host = 'localhost';
exports.port = 4025;
exports.app_id = ""; //smartthings app_id
exports.access_token = ""; //smartthings access_token
Changes were mostly done to the nap-example.js
, however if you're adding SmartThings integration... you'll need to setup your own app by following instructions similar to this (I've contributed to this project as well)... smartthings-dsc-alarm