Node TRÅDFRI API - Node.js Argon (v4.x+) supported

Node API to control IKEA TRÅDFRI (TRADFRI) Lights. Tested on node version 4.4.7

The package is a refactoring for older versions of Node.js (from 4.x) support of node-tradfri by morzzz007

• Every method returns a Promise. See example under Usage for a detailed description
• Package has been tested on Node.js v4.4.7
• P-throttle is used to make sure that all CoAP client calls are in series (to avoid execution blocking)
• RSVP lib is used to manage Promises in the library
• Thanks morzzz007 for creating node-tradfri. It made it fairly simple to increased the backlevel support

Installation

npm install node-tradfri-argon --save

CoAP

This library uses libcoap with tinydtls to send CoAP requests. Build instructions are described below see this section. and set the coapClientPath config setting to point to your library.

Usage

  var tradfri = require('node-tradfri-argon').create({
    coapClientPath: './lib/coap-client', // Path to coap-client
    securityId: '<security_id>',        // As found on the IKEA hub
    hubIpAddress: '<hub_ip_address>'    // IP-address of IKEA hub
  });

  tradfri.getDevices().then((devices) => {
    devices.forEach((device) => {
        console.log(device);
    });
  }).catch((error) => {
    // Manage the error
    console.log(error);
  });

  // or

  tradfri.setDeviceState(65537, {
    state: 'on',
    color: 'ffffff',
    brightness: 255
  }).then(...).catch(...);

API

Basics

Every exposed method is asynchronous and returns a promise.

Using the typical promises approach:

  tradfri.getDeviceIds().then(deviceIds => {
    // do something
  });

Public API List

|Devices|Groups| |---|---| |getDeviceIds()|getGroupIds()| |getDevice()|getGroup()| |getDevices()|getGroups()| ||getAll()| |turnOnDevice()|turnOnGroup()| |turnOffDevice()|turnOffGroup()| |toggleDevice()|toggleGroup()| |setDeviceState()|setGroupState()|

Methods for working indivudial devices/bulbs (for groups see this section)

getDeviceIds()

Returns device id's.

Response:

  [65536, 65537, 65538]

getDevice(<deviceId>)

Returns details on one specific device.

Response:

{ id: 65536,
    name: 'TRADFRI remote control',
    type: 'TRADFRI remote control',
    on: false }

getDevices()

Returns an array with every device connected to the hub.

Example:

[ { id: 65536,
    name: 'TRADFRI remote control',
    type: 'TRADFRI remote control',
    on: false },
  { id: 65537,
    name: 'TRADFRI bulb E27 WS opal 980lm',
    type: 'TRADFRI bulb E27 WS opal 980lm',
    on: false },
  { id: 65538,
    name: 'TRADFRI bulb E27 WS opal 980lm 2',
    type: 'TRADFRI bulb E27 WS opal 980lm',
    on: false } ]

turnOnDevice(<deviceId>)

|Parameters|type|values| |---|---|---| |deviceId|required|int/string|

turnOffDevice(<deviceId>)

|Parameters|type|values| |---|---|---| |deviceId|required|int/string|

toggleDevice(<deviceId>, <state>)

|Parameters|type|values| |---|---|---| |deviceId|required|int/string| |state|optional|boolean|

setDeviceState(<deviceId>, <newState>)

Examples

Turn device on:

tradfri.setDeviceState(65537, { state: 'on' }).then(..);

Combine settings, turn on and set brightness:

tradfri.setDeviceState(65537, { state: 'on', brightness: 255 }).then(...);

Usage

|Parameters|type|values| |---|---|---| |deviceId|required|int/string| |newState|required|object|

In newState you can combine the following values:

|Parameters|values|action| |---|---|---| |state|boolean/string ('on', 'off', 'toogle')| light on/off/toggle |color|string (hex color value, ex: 'efd275' or 'cool', 'normal', 'warm')|Sets color |brightness|number/string (0-255)|Sets brightness |transitionTime|number in seconds/10|Sets time to transition from one state to another

Methods for working with groups

getGroupIds()

Returns group id's.

Response:

  [150429]

getGroup(<groupId>)

Returns group id's.

Response:

{ id: 150429,
    name: 'Kitchen',
    devices: [65536, 65537, 65538],
    on: false }

getGroups()

Returns an array of groups with the devices in it.

Response:

[ { id: 150429,
    name: 'Kitchen',
    devices: [ [65536, 65537, 65538] ],
    on: false },
    { id: 150428,
    name: 'Livingroom',
    devices: [ [65531, 65532] ],
    on: true }]

getAll()

Returns an array of groups with the devices in it including detailed device information.

Response:

[ { id: 150429,
    name: 'Kitchen',
    devices: [ { id: 65536,
        name: 'TRADFRI remote control',
        type: 'TRADFRI remote control',
        on: false },
      { id: 65537,
        name: 'TRADFRI bulb E27 WS opal 980lm',
        type: 'TRADFRI bulb E27 WS opal 980lm',
        on: false },
      { id: 65538,
        name: 'TRADFRI bulb E27 WS opal 980lm 2',
        type: 'TRADFRI bulb E27 WS opal 980lm',
        on: false } ],
    on: false },
    {...}]

turnOnGroup(<groupId>)

|Parameters|type|values| |---|---|---| |groupId|required|int/string|

turnOffGroup(<groupId>)

|Parameters|type|values| |---|---|---| |groupId|required|int/string|

toggleGroup(<groupId>, <state>)

|Parameters|type|values| |---|---|---| |groupId|required|int/string| |state|optional|boolean|

setGroupState(<groupId>, <newState>)

Examples

Turn group on:

tradfri.setGroupState(150429, { state: 'on' }).then(...);

Combine settings, turn on and set brightness:

tradfri.setGroupState(150429, { state: 'on', brightness: 255 }).then(...);

Usage

|Parameters|type|values| |---|---|---| |groupId|required|int/string| |newState|required|object|

In newState you can combine the following values:

|Parameters|values|action| |---|---|---| |state|boolean/string ('on', 'off')|Toggle light on/off |color|string (hex color value, ex: 'efd275')|Sets color |brightness|number/string (0-255)|Sets brightness

Compiling libcoap

A number of versions are available in the lib folder but if it is required to recompile the library the instructions are below.

Linux

Install libcoap as descibed below for Debian/Ubuntu/Raspbian: (credits to homebridge-tradfri)

$ apt-get install libtool git build-essential autoconf automake
$ git clone --recursive https://github.com/obgm/libcoap.git
$ cd libcoap
$ git checkout dtls
$ git submodule update --init --recursive
$ ./autogen.sh
$ ./configure --disable-documentation --disable-shared
$ make

OSX

Use brew to install the prerequisites and then clone the git repo and build the library as described below.

$ brew install libtool
$ brew install automake
$ brew install autoconf
$ git clone https://github.com/obgm/libcoap.git
$ cd libcoap
$ git checkout origin/dtls
$ git checkout -b dtls
$ git submodule update --init ext/tinydtls
$ cd ext/tinydtls
$ autoreconf
$ ./configure
$ cd ../../
$ ./autogen.sh
$ ./configure --disable-shared --disable-documentation
$ make

Where is the client?

After compilation you'll find the coap-client binary in ./examples. Simply refer to the coap-client location when initiating node-tradfri-argon. E.g.

  var tradfri = require('node-tradfri-argon').create({
    coapClientPath: '/home/pi/libcoap/examples/coap-client',
    securityId: '2wsY2QSL65k5iD8i',
    hubIpAddress: '192.168.2.193'
  });