node-red-contrib-storfly-ics-vtview

A Node-RED node to display, transfer vtView data

Install

Run the following command in your Node-RED user directory – typically ~/.node-red:

npm i node-red-contrib-storfly-ics-vtview

Usage

Provides one palette node which will transfer, display vtView information from storfly device to IoT Gateway.

Input

| Parametters | Data Type | Notes | | ------ | ------ | ------ | | IP Address | string | IP address of StorFly ICS | | Username | string | admin | | Password | string | Serial number of the device |

Output

| Parametters | Data Type | Unit | Default Value | Notes | | ------ | ------ | ------ | ------ | ------ | | revision | int | | | Revision of this structure | | remainingTBW | int | TB | | TB = Terra byte, 1TB = 1024 GB | | dataWritten | double | GB | | GB = Giga byte | | estimateEOL | double | day | 3650 | Estimate Time remaining in days | | remainingLife | int | percentage | | Start from 100% decreasing to 0% | | yearInService | double | day | | Start from the day the StorFly ICS is commissioned for service. | | timestamp | int | | | Timestamp (date & time) of the most recent vtView record | | serial | string | | | | | ipAddress | string | | | | | errorMessage | string | "Not enough vtview data" or ""| | If the usage is not a full drive-write, there is not enough usage data for vtView software to do the calculation, vtView will return "Not enough vtView data". Otherwise, this field is return empty. |

Flow Example

Display vtView information to a dashboard for Light theme

https://flows.nodered.org/flow/7fcfa65f86a0e54ece2479b58286209f

Display vtView information to a dashboard for Dark theme

https://flows.nodered.org/flow/4a9192b0a0e133266c17358e42a40d05

Note: Before you use this flow, please install node-red-dashboard first

License

Virtium License - See file LICENSE in the source