node-red-contrib-redplc-tf-csaxiodriver
v1.0.1
Published
Node-Red node for CSA Controller IO Driver X Version
Downloads
6
Maintainers
Readme
node-red-contrib-redplc-tf-csaxiodriver
Node-Red CSA Controller node by using mcp23017 16bit I/O Expander. This module is modified from node-red-contrib-rpi-mcp23017
Node Features
- 2 x 8 x Digital Inputs or Digital Outputs
- Add Pullup Resistor to Digital Inputs
- Eight selectable Device Addresses
Install
Install with Node-Red Palette Manager or npm command:
cd ~/.node-red
npm install node-red-contrib-redplc-tf-csaiodriver
Usage
This node reads/writes from/to Node-Red global variables Update is triggered by redPlc cpu node or module-update node This node works only on Raspberry Pi with Raspberry Pi OS Enable I2C with raspi-config. Consult datasheet for absolute maximum ratings
Digital Input (Variable I):
Digital Output (Variable Q):
PA = Input, PB = Input PA = Output, PB = Output
|Pin|Bit|Pin|Bit| |---|---|---|---| |PA0|0|PB0|8| |PA1|1|PB1|9| |PA2|2|PB2|10| |PA3|3|PB3|11| |PA4|4|PB4|12| |PA5|5|PB5|13| |PA6|6|PB6|14| |PA7|7|PB7|15|
PA = Input, PB = Output PA = Output, PB = Input
|Pin|Bit|Pin|Bit| |---|---|---|---| |PA0|0|PB0|0| |PA1|1|PB1|1| |PA2|2|PB2|2| |PA3|3|PB3|3| |PA4|4|PB4|4| |PA5|5|PB5|5| |PA6|6|PB6|6| |PA7|7|PB7|7|
Donate
If you like my work please support it with donate to original developper: