node-msp
v0.2.0
Published
MultiWii serial protocol library specialised for cleanflight
Downloads
13
Maintainers
Readme
node-msp
MultiWii serial protocol library specialized for usage with Cleanflight. It should also work with varying degrees of success with BaseFlight, MultiWii and other flight-controllers that support the MultiWii protocol.
The library has no dependencies, for real world usage communication using the serial port would be required. and example of this is included within the example.js file.
Both deserialization of MSP messages and serialization of messages is supported. Much of the functionality is untested therefore things may not work. Most of the MSP (except a few functions) are implemented.
You will have the look at the code for further documentation unfortunately. I may update this read-me at sometime.
Syntax
Basics
The library itself does not handle communication of the serial port (UART). To do this you will need to use a library such as serialport
var msp = require('node-msp');
var reader = new msp.reader();
var serialport = require('serialport');
var portLocation = '/dev/cu.PL2303-00001014'; //Path to serialport
var port = new serialport.SerialPort(portLocation, {
baudrate : 115200 //Usual baud rate for flight controller
});
reader.on('error', function (error) {
console.log('There was an error - ', error);
});
reader.on('message', function (message) {
console.log(message);
});
port.on('open', function () {
console.log('port connected');
setInterval(function () {
var message = msp.send('MSP_MOTOR');
port.write(message, function (error) {
//console.log(error);
});
}, 200);
port.on('data', function (data) {
reader.handleBuffer(data);
});
});
port.on('close', function () {
console.log('port closed');
});
Events (inbound messages)
Events are deserialized and emitted from a instance of the reader class within the node-msp module.
var reader = new require('node-msp').reader();
Data from the serial port needs to be fed into the reader class.
var reader = new require('node-msp').reader();
var serialport = require('serialport');;
var port = new serialport.SerialPort('/dev/cu.PL2303-00001014', {
baudrate : 115200 //Usual baud rate for flight controller
});
port.on('open', function () {
port.on('data', function (data) {
//Feed the data in
reader.handleBuffer(data);
});
});
Two events can be emitted from the reader class. Error and Message. Messages can are partially abstracted you will have to look at the code or experiment for more details.
reader.on('error', function (error) {
console.log('There was an error - ', error);
});
reader.on('message', function (message) {
//Will contain the message name (from the ID number and the payload)
console.log(message);
});
Outbound requests/messages
Messages can be serialized by the module.
var reader = new require('node-msp').reader();
var serialport = require('serialport');;
var port = new serialport.SerialPort('/dev/cu.PL2303-00001014', {
baudrate : 115200 //Usual baud rate for flight controller
});
port.on('open', function () {
port.on('data', function (data) {
//Feed the data in
reader.handleBuffer(data);
});
});
Two events can be emitted from the reader class. Error and Message. Messages can are partially abstracted you will have to look at the code or experiment for more details.
msp.send('MSP_MOTOR');
Supported functions
Sending
When sending messages either the message id or name can be used. Where messages are sending data to the flight controller payload can be included as the second argument of the send function (this is optional)
var payload = {
motors : [1000, 1000, 1000, 2000]
};
var message = msp.send('MSP_MOTOR', payload);
Messages with numbers starting with 1 are messages from the flight controller, requests for these messages require no payload. Messages beginning with 2 are requests to the flight controller, they will never be received but have a payload when sent. Supported messages are : 100. MSP_IDENT 101. MSP_STATUS 102. MSP_RAW_IMU 103. MSP_SERVO 104. MSP_MOTOR 105. MSP_RC 106. MSP_RAW_GPS 107. MSP_COMP_GPS 108. MSP_ATTITUDE 109. MSP_ALTITUDE 110. MSP_ANALOG 111. MSP_RC_TUNING 112. MSP_PID 114. MSP_MISC 115. MSP_MOTOR_PINS 118. MSP_WP 200. MSP_SET_RAW_RC 201. MSP_SET_RAW_GPS 202. MSP_SET_PID 205. MSP_ACC_CALIBRATION 206. MSP_MAG_CALIBRATION 207. MSP_SET_MISC 208. MSP_RESET_CONF 209. MSP_SET_WP 210. MSP_SELECT_SETTING 211. MSP_SET_HEAD 214. MSP_SET_MOTOR 240. MSP_BIND 250. MSP_EEPROM_WRITE
Recieving
Messages are decoded as they arrive. Messages will have the name of the command and partially abstracted payload.
More
More information of MSP messages can be found on the MultiWii wiki