node-ads-api
v1.4.17
Published
NodeJS Twincat ADS protocol implementation
Downloads
189
Maintainers
Readme
node-ads
A NodeJS implementation for the Twincat ADS protocol. (Twincat and ADS is from Beckhoff ©. I'm not affiliated.)
Changelog
debug
module.- Added aliases:
TOD -> TIME_OF_DAY
andDT -> DATE_AND_TIME
. - Code standardized.
- Using
safe-buffer
. - When we use notification, the notification will blocked to fire if too many notifications are defined
multiRead
method and read bug fix (timeout).multiRead
andgetHandels
method improved,multiWrite
added.- working string length
- array added
Requirements
- Beckhoff PLC that has an ethernet connection and is connected to your LAN
- Make your you give the PLC a fixed IP address
- Make sure you can ping the PLC from another computer
Configuration
Enable ADS on your PLC project. To do this click on your task and then enable the checkbox before
Create symbols
(if he is not disabled). In addition, you can still, under I/O Devices click on Image and go to the ADS tab. Check theEnable ADS Server
and alsoCreate symbols
. Download the new configuration and make sure you reboot your PLC. The reboot is only needed when you are using TwinCat 2.Now add a static route to our Beckhoff PLC. The route should point to your server that will run the proxy application. It's also a good idea to add an extra static route that points to your local development device. This way you can test out the proxy from your development device too.
Attention
TwinCAT AMS Router doesn't allow multiple TCP connections from the same host. So when you use two AdsLib instances on the same host to connect to the same TwinCAT router, you will see that TwinCAT will close the first TCP connection and only respond to the newest. If you start the TwinCat System Manager and Node-Red ADS on the same PC at the same time, Node-Red will not run anymore. You can set up a second IPv4 on the PC and assign to this a ADS NET ID under Twincat
As ADS is transmitted over a TCP connection, there is no real time guarantee.
Examples
Hello machine
var ads = require('node-ads')
var options = {
//The IP or hostname of the target machine
host: "10.0.0.2",
//The NetId of the target machine
amsNetIdTarget: "5.1.204.160.1.1",
//The NetId of the source machine.
//You can choose anything in the form of x.x.x.x.x.x,
//but on the target machine this must be added as a route.
amsNetIdSource: "192.168.137.50.1.1",
//OPTIONAL: (These are set by default)
//The tcp destination port
//port: 48898
//The ams source port
//amsPortSource: 32905
//The ams target port for TwinCat 2 Runtime 1
//amsPortTarget: 801
//The ams target port for TwinCat 3 Runtime 1
//amsPortTarget: 851
//The timeout for PLC requests
//timeout: 500
//The Local address the socket should connect from
//localAddress: "192.168.137.50"
//The Local port the socket should connect from
//localPort: 50000
//Version of IP stack. Must be 4, 6, or 0. The value 0 indicates that both IPv4 and IPv6 addresses are allowed. Default: 0
//family: 4
}
var client = ads.connect(options, function() {
this.readDeviceInfo(function(err, result) {
if (err) console.log(err)
console.log(result)
this.end()
})
})
client.on('error', function(error) {
console.log(error)
})
Read something
var myHandle = {
//Handle name in twincat
symname: '.TESTINT',
//An ads type object or an array of type objects.
//You can also specify a number or an array of numbers,
//the result will then be a buffer object.
//If not defined, the default will be BOOL.
bytelength: ads.INT,
//The propery name where the value should be written.
//This can be an array with the same length as the array length of byteLength.
//If not defined, the default will be 'value'.
propname: 'value'
}
var client = ads.connect(options, function() {
this.read(myHandle, function(err, handle) {
if (err) console.log(err)
//result is the myHandle object with the new properties filled in
console.log(handle.value)
//All handles will be released automaticly here
this.end()
})
})
Write something
var client = ads.connect(options, function() {
myHandle.value = 5
this.write(myHandle, function(err) {
if (err) console.log(err)
this.read(myHandle, function(err, handle) {
if (err) console.log(err)
console.log(handle.value)
this.end()
})
})
})
Get notifications
var myHandle = {
symname: '.CounterTest',
bytelength: ads.WORD,
//OPTIONAL: (These are set by default)
//transmissionMode: ads.NOTIFY.ONCHANGE, (other option is ads.NOTIFY.CYCLIC)
//maxDelay: 0, -> Latest time (in ms) after which the event has finished
//cycleTime: 10 -> Time (in ms) after which the PLC server checks whether the variable has changed
}
var client = ads.connect(options, function() {
this.notify(myHandle)
})
client.on('notification', function(handle){
console.log(handle.value)
})
process.on('exit', function () {
console.log("exit")
})
process.on('SIGINT', function() {
client.end(function() {
process.exit()
})
})
MultiRead something
var client = ads.connect(options, function() {
this.multiRead(
[{
symname: '.TESTBOOL',
bytelength: ads.BOOL,
}, {
symname: '.TESTINT',
bytelength: ads.UINT,
}],
function (error, handles) {
if (error) {
console.log(error)
} else {
handles.forEach(function(handle){
if (handle.err) {
console.error(handle.err)
} else {
console.log(handle.value)
}
}
}
this.end()
})
)
})
MultiWrite something
var client = ads.connect(options, function() {
this.multiRead(
[{
symname: '.TESTBOOL',
bytelength: ads.BOOL,
value: false
}, {
symname: '.TESTINT',
bytelength: ads.UINT,
value: 5
}],
function (error, handles) {
if (error) {
console.log(error)
} else {
handles.forEach(function(handle){
if (handle.err) {
console.error(handle.err)
} else {
console.log(handle.value)
}
}
}
this.end()
})
)
})
Get handles
var client = ads.connect(options, function() {
this.getHandles(
[{
symname: '.TESTBOOL',
}, {
symname: '.TESTINT',
}],
function (error, handles) {
if (error) {
console.log(error)
} else if (handles.err) {
console.error(handles.err)
} else {
console.log(handles)
}
this.end()
})
})
Get symbol list
var client = ads.connect(options, function() {
this.getSymbols(function(err, symbols, false) {
if (err) console.log(err)
console.log(JSON.stringify(symbols, null, 2))
this.end()
})
})
Get datatyp list
var client = ads.connect(options, function() {
this.getDatatyps(function(err, datatyps) {
if (err) console.log(err)
else console.log(JSON.stringify(datatyps, null, 2))
this.end()
})
})
Read device state
var client = ads.connect(options, function() {
this.readState(function(error,result) {
if (error) {
consiole.log(error)
} else {
if (result.adsState == ads.ADSSTATE.RUN) {
console.log('The PLC is lucky!')
}
console.log('The state is '+ads.ADSSTATE.fromId(result.adsState))
}
this.end()
});
})
The following states are possible:
ads.ADSSTATE.INVALID
ads.ADSSTATE.IDLE
ads.ADSSTATE.RESET
ads.ADSSTATE.INIT
ads.ADSSTATE.START
ads.ADSSTATE.RUN
ads.ADSSTATE.STOP
ads.ADSSTATE.SAVECFG
ads.ADSSTATE.LOADCFG
ads.ADSSTATE.POWERFAILURE
ads.ADSSTATE.POWERGOOD
ads.ADSSTATE.ERROR
ads.ADSSTATE.SHUTDOWN
ads.ADSSTATE.SUSPEND
ads.ADSSTATE.RESUME
ads.ADSSTATE.CONFIG
ads.ADSSTATE.RECONFIG
ads.ADSSTATE.STOPPING
Event-Driven Detection of Changes to the Symbol Table
If the symbol table changes because, for instance, a new PLC program is written into the controller, the handles must be ascertained once again. The example below illustrates how changes to the symbol table can be detected.
var start = true;
var myHandle = {
indexGroup: ads.ADSIGRP.SYM_VERSION,
indexOffset: 0,
bytelength: ads.BYTE,
}
var client = ads.connect(options, function() {
start = true;
this.notify(myHandle);
})
client.on('notification', function(handle){
if (start) {
console.log('symbol table version '+handle.value)
} else {
console.log('symbol table changed '+handle.value)
}
start = false;
})
process.on('SIGINT', function() {
client.end(function() {
process.exit()
})
})
client.on('error', function(error) {
console.log(error)
})
Something about the handle
If the handle remains persistent (eg as a global object), when the end() function is called the symhandle must be deleted from the handle. Otherwise, the old non-existing syshandle is used in a new connection and triggers an error.
symname
Global variables must start with a dot: .engine
Program variables must start with the programname: MAIN.UpTyp.timerUp.PT
Something about the bytelength
All possibilities of bytelength described here work with read, write, notificaton, multiread and multiwrite.
If you simply enter a number, reading a value returns a buffer object of length or expecting to write. This can be further processed with the standard functions of buffer.
This mehtode is called RAW read and write.
var myHandle = {
symname: '.TestDoubleIntStruct',
bytelength: 2,
propname: 'value'
}
var client = ads.connect(options, function() {
myHandle.value = new Buffer(4)
myHandle.value.writeInt16LE(5, 0)
myHandle.value.writeInt16LE(5, 2)
this.write(myHandle, function(err) {
if (err) console.log(err)
this.read(myHandle, function(err, handle) {
if (err) console.log(err)
console.log(handle.value)
this.end()
})
})
})
There are also ready-made objects for reading and writing numeric variables:
ads.BOOL
ads.BYTE
ads.WORD
ads.DWORD
ads.SINT
ads.USINT
ads.INT
ads.UINT
ads.DINT
ads.UDINT
ads.LINT
ads.ULINT
ads.REAL
ads.LREAL
There are also ready-made objects for reading and writing date and time variables:
With this type it is possible to convert the time zone. There are two ways to control this feature. You can add the variable useLocalTimezone to the handle. This is true for defauld. Or you use the function ads.useLocalTimezone().
ads.TIME
ads.TIME_OF_DAY
ads.TOD // TIME_OF_DAY alias
ads.DATE
ads.DATE_AND_TIME
ads.DT // DATE_AND_TIME alias
var myHandle = {
symname: '.TESTTIME',
bytelength: ads.useLocalTimezone(ads.TIME,false),
propname: 'value'
}
var myHandle = {
symname: '.TESTTIME',
useLocalTimezone: false,
bytelength: ads.TIME,
propname: 'value'
}
The type ads.STRING is fix for 80 characters. Therefore you can use the ads.string(length) function.
var myHandle = {
symname: '.SOMETEXT80',
bytelength: ads.STRING,
propname: 'value'
}
var myHandle = {
symname: '.SOMETEXT10',
bytelength: ads.string(10),
propname: 'value'
}
There is also a possibility to read and write arrays. This is done via the function ads.array(type, lowIndex, hiIndex). The low index and the hi index must be the same as in the twincat definition On reading the Value is an array, on writing the Value must be an array. The array under node always starts with 0, independently as loIndex and hiIndex are given.
var myHandle = {
symname: '.SOMEINTARREY',
bytelength: ads.array(ads.INT,0,9),
propname: 'value'
}
You can also read and write structures. An array is passed for bytelength. Then an array with the same number of parameters is expected in propname. The structur is mapped binary, so it must be described exactly how it exists in the PLC.
var myHandle = {
symname: '.SOMESTRUCTURE',
bytelength: [ ads.BOOL,
ads.array(ads.INT,0,9),
ads.array(ads.string(10),0,9),
ads.array(ads.useLocalTimezone(ads.TIME,false),0,9)
],
propname: ['value_a.bool',
'value_a.arrayofint',
'value_a.arrayofstring',
'value_a.arrayoftime']
}
License (MIT)
Copyright (c) 2012 Inando
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.