nixfilter-serialport

A filter (non-interactive command-line tools reading from STDIN and writing to STDOUT) for reading from and writing to serial ports.

Installation

$ npm install -g nixfilter-serialport

Requires Node.js.

Command-line tools

nixfilter-serialport

nixfilter-serialport writes all data read from STDIN to the specified serial port, and writes all data read from the serial port to STDOUT.

$ nixfilter-serialport -h

usage: nixfilter-serialport [-h]
                            [--baud_rate {75,150,300,600,1200,2400,4800,9600,19200,38400,57600,76800,115200,230400,460800,921600}]
                            [--data_bits {7,8}] [--parity {none,even,mark,odd,space}]
                            [--stop_bits {1,2}]
                            port

Read from/write to a serial port

Positional arguments:
  port                  The serial port to use. On Linux systems, this is 
                        usually something like "/dev/ttyUSB0".

Optional arguments:
  -h, --help            Show this help message and exit.
  --baud_rate {75,150,300,600,1200,2400,4800,9600,19200,38400,57600,76800,115200,230400,460800,921600}, --baudrate {75,150,300,600,1200,2400,4800,9600,19200,38400,57600,76800,115200,230400,460800,921600}, --baud {75,150,300,600,1200,2400,4800,9600,19200,38400,57600,76800,115200,230400,460800,921600}, -b {75,150,300,600,1200,2400,4800,9600,19200,38400,57600,76800,115200,230400,460800,921600}
                        The baud rate to use (default: 115200)
  --data_bits {7,8}, --databits {7,8}, --bits {7,8}, -d {7,8}
                        The number of data bits (default: 8)
  --parity {none,even,mark,odd,space}, -p {none,even,mark,odd,space}
                        The parity (default: none)
  --stop_bits {1,2}, --stopbits {1,2}, -s {1,2}
                        The number of stop bits (default: 1)