koa2-ratelimit-code
v0.9.1
Published
IP rate-limiting middleware for Koajs 2. Use to limit repeated requests to APIs and/or endpoints such as password reset.
Downloads
17
Maintainers
Keywords
Readme
Koajs 2 Rate Limit (Bruteforce)
Rate-limiting middleware for Koa2 with async
await
. Use to limit repeated requests to APIs and/or endpoints such as password reset.
Note: This module is based on express-rate-limit and adapted to koa2 ES6 with the async
await
capabilities.
Summary
Install
$ npm install --save koa2-ratelimit
Usage
For an API-only server where the rate-limiter should be applied to all requests:
const RateLimit = require('koa2-ratelimit').RateLimit;
const limiter = RateLimit.middleware({
interval: { min: 15 }, // 15 minutes = 15*60*1000
max: 100, // limit each IP to 100 requests per interval
});
// apply to all requests
app.use(limiter);
Create multiple instances to apply different rules to different routes:
const RateLimit = require('koa2-ratelimit').RateLimit;
const KoaRouter = require('koa-router');
const router = new KoaRouter();
const getUserLimiter = RateLimit.middleware({
interval: 15*60*1000, // 15 minutes
max: 100,
prefixKey: 'get/user/:id' // to allow the bdd to Differentiate the endpoint
});
// add route with getUserLimiter middleware
router.get('/user/:id', getUserLimiter, (ctx) => {
// Do your job
});
const createAccountLimiter = RateLimit.middleware({
interval: { hour: 1, min: 30 }, // 1h30 window
delayAfter: 1, // begin slowing down responses after the first request
timeWait: 3*1000, // slow down subsequent responses by 3 seconds per request
max: 5, // start blocking after 5 requests
prefixKey: 'post/user', // to allow the bdd to Differentiate the endpoint
message: "Too many accounts created from this IP, please try again after an hour"
});
// add route with createAccountLimiter middleware
router.post('/user', createAccountLimiter, (ctx) => {
// Do your job
});
// mount routes
app.use(router.middleware())
Set default options to all your middleware:
const RateLimit = require('koa2-ratelimit').RateLimit;
RateLimit.defaultOptions({
message: 'Get out.',
// ...
});
const getUserLimiter = RateLimit.middleware({
max: 100,
// message: 'Get out.', will be added
});
const createAccountLimiter = RateLimit.middleware({
max: 5, // start blocking after 5 requests
// message: 'Get out.', will be added
});
Use with RedisStore
const RateLimit = require('koa2-ratelimit').RateLimit;
const Stores = require('koa2-ratelimit').Stores;
RateLimit.defaultOptions({
message: 'Get out.',
store: new Stores.Redis({
host: 'redis_host',
port: 'redis_port',
password: 'redis_password',
db: 1
})
});
const getUserLimiter = RateLimit.middleware({
prefixKey: 'get/user/:id',
});
router.get('/user/:id', getUserLimiter, (ctx) => {});
const createAccountLimiter = RateLimit.middleware.middleware({
prefixKey: 'post/user',
});
router.post('/user', createAccountLimiter, (ctx) => {});
// mount routes
app.use(router.middleware())
Use with SequelizeStore
const Sequelize = require('sequelize');
const RateLimit = require('koa2-ratelimit').RateLimit;
const Stores = require('koa2-ratelimit').Stores;
const sequelize = new Sequelize(/*your config to connected to bdd*/);
RateLimit.defaultOptions({
message: 'Get out.',
store: new Stores.Sequelize(sequelize, {
tableName: 'ratelimits', // table to manage the middleware
tableAbuseName: 'ratelimitsabuses', // table to store the history of abuses in.
})
});
const getUserLimiter = RateLimit.middleware({
prefixKey: 'get/user/:id',
});
router.get('/user/:id', getUserLimiter, (ctx) => {});
const createAccountLimiter = RateLimit.middleware.middleware({
prefixKey: 'post/user',
});
router.post('/user', createAccountLimiter, (ctx) => {});
// mount routes
app.use(router.middleware())
Use with MongooseStore (Mongodb)
const mongoose = require('mongoose');
const RateLimit = require('koa2-ratelimit').RateLimit;
const Stores = require('koa2-ratelimit').Stores;
await mongoose.connect(/*your config to connected to bdd*/);
RateLimit.defaultOptions({
message: 'Get out.',
store: new Stores.Mongodb(mongoose.connection, {
collectionName: 'ratelimits', // table to manage the middleware
collectionAbuseName: 'ratelimitsabuses', // table to store the history of abuses in.
}),
});
A ctx.state.rateLimit
property is added to all requests with the limit
, current
, and remaining
number of requests for usage in your application code.
Configuration
interval: Time Type - how long should records of requests be kept in memory. Defaults to
60000
(1 minute).delayAfter: max number of connections during
interval
before starting to delay responses. Defaults to1
. Set to0
to disable delaying.timeWait: Time Type - how long to delay the response, multiplied by (number of recent hits -
delayAfter
). Defaults to1000
(1 second). Set to0
to disable delaying.max: max number of connections during
interval
milliseconds before sending a429
response code. Defaults to5
. Set to0
to disable.message: Error message returned when
max
is exceeded. Defaults to'Too many requests, please try again later.'
statusCode: HTTP status code returned when
max
is exceeded. Defaults to429
.headers: Enable headers for request limit (
X-RateLimit-Limit
) and current usage (X-RateLimit-Remaining
) on all responses and time to wait before retrying (Retry-After
) whenmax
is exceeded.skipFailedRequests: when
true
, failed requests (response status >= 400) won't be counted. Defaults tofalse
.whitelist: Array of whitelisted IPs to not be rate limited.
getUserId: Function used to get userId (if connected) to be added as key and saved in bdd, should an abuse case surface. Defaults:
async function (ctx) { const whereFinds = [ctx.state.user, ctx.user, ctx.state.User, ctx.User, ctx.state, ctx]; const toFinds = ['id', 'userId', 'user_id', 'idUser', 'id_user']; for (const whereFind of whereFinds) { if (whereFind) { for (const toFind of toFinds) { if (whereFind[toFind]) { return whereFind[toFind]; } } } } return null; },
keyGenerator: Function used to generate keys. By default userID (if connected) or the user's IP address. Defaults:
async function (ctx) { const userId = await this.options.getUserId(ctx); if (userId) { return `${this.options.prefixKey}|${userId}`; } return `${this.options.prefixKey}|${ctx.request.ip}`; }
skip: Function used to skip requests. Returning true from the function will skip limiting for that request. Defaults:
async function (/*ctx*/) { return false; }
handler: The function to execute once the max limit has been exceeded. It receives the request and the response objects. The "next" param is available if you need to pass to the next middleware. Defaults:
async function (ctx/*, next*/) { ctx.status = this.options.statusCode; ctx.body = { message: this.options.message }; if (this.options.headers) { ctx.set('Retry-After', Math.ceil(this.options.interval / 1000)); } }
onLimitReached: Function to listen each time the limit is reached. It call the store to save abuse, You can use it to debug/log. Defaults:
async function (ctx) { this.store.saveAbuse({ key: await this.options.keyGenerator(ctx), ip: ctx.request.ip, user_id: await this.options.getUserId(ctx), }); }
weight: Function to set the incrementation of the counter depending on the request. Defaults:
async function (/*ctx*/) { return 1; }
store: The storage to use when persisting rate limit attempts. By default, the MemoryStore is used.
Avaliable data stores are:
- MemoryStore: (default)Simple in-memory option. Does not share state when app has multiple processes or servers.
- SequelizeStore: more suitable for large or demanding deployments.
The delayAfter
and timeWait
options were written for human-facing pages such as login and password reset forms.
For public APIs, setting these to 0
(disabled) and relying on only interval
and max
for rate-limiting usually makes the most sense.
Time Type
Time type can be milliseconds or an object
Times = {
ms ?: number,
sec ?: number,
min ?: number,
hour ?: number,
day ?: number,
week ?: number,
month ?: number,
year ?: number,
};
Examples
RateLimit.middleware({
interval: { hour: 1, min: 30 }, // 1h30 window
timeWait: { week: 2 }, // 2 weeks window
});
RateLimit.middleware({
interval: { ms: 2000 }, // 2000 ms = 2 sec
timeWait: 2000, // 2000 ms = 2 sec
});
License
MIT © YSO Corp