homebridge-tahoma
v2.2.59
Published
Sample Platform plugin for TaHoma and Cozytouch services (Somfy,Atlantic,Thermor,Sauter): https://github.com/dubocr/homebridge-tahoma
Downloads
1,330
Maintainers
Readme
Overkiz (Somfy) - Homebridge-TaHoma
Homebridge plugin supporting Overkiz based platforms :
| Service code | Vendor | Product compatibility |
|---------------------------|---------------------------|-------------------------------------------------------------------|
| local
| Somfy local API | TaHoma, TaHoma Switch (configure local API) |
| somfy_europe
| Somfy Europe | TaHoma, TaHoma Switch, Connexoon IO, Kit de connectivité Orange |
| somfy_australia
| Somfy Australia | Connexoon RTS and other products in Australia |
| somfy_north_america
| Somfy North America | TaHoma and other product in North America |
| cozytouch
| Atlantic, Thermor, Sauter | Cozytouch |
| flexom
| Bouygues | Flexom |
| hi_kumo
| Hitachi | Hi hi_kumo |
| rexel
| Rexel | Energeasy connectivité |
Installation
- Install homebridge using:
npm install -g homebridge
- Install this plugin using:
npm install -g homebridge-tahoma
- Update your configuration file. See bellow for a sample.
Configuration
Minimal configuration sample:
{
"bridge": {
...
},
"description": "...",
"accessories": [],
"platforms":[
{
"platform": "Tahoma",
"name": "My TaHoma Box",
"service": "somfy_europe",
"user": "[email protected]",
"password": "MyPassw0rd",
}
]
}
Configuration parameters:
| Parameter | Type | Default | Note |
|---------------------------|---------------|-------------------|-----------------------------------------------|
| service
| String | 'somfy_europe' | optional, service name (see above) |
| user
| String | null | mandatory, your service account username (or gateway PIN / IP address) |
| password
| String | null | mandatory, your service account password (or API token) |
| pollingPeriod
| Integer | 30 | optional, bridge polling period in seconds |
| refreshPeriod
| Integer | 30 | optional, device states refresh period in minutes |
| exclude
| String[] | [] | optional, protocol, ui, widget or device name to exclude |
| exposeScenarios
| Boolean | false | optional, expose scenarios as HomeKit switches. Could also specify a list of string corresponding to scenarios names to expose |
| devicesConfig
| Object[] | [] | optional list of device specific configuration (see below) |
Configure Local API
Local API service is available on TaHoma and TaHoma switch gateways.
WARNING: Switching to local API will break your HomeKit configuration (automations) as local API device identifiers actually differs.
To use Local API you will have to:
- Activate
developer mode
(www.somfy.com > My Account > Activate developer mode) - Generate API credentials at https://dev.duboc.pro/homebridge-tahoma
- Configure the plugin service to Local API:
"service":"local"
When using Local API service, please fill user
with your gateway PIN number or IPv4 address and password
with the token generated at step 2
For more information, browse https://developer.somfy.com/developer-mode
Specific device configuration
This option allows you to apply a specific configuation to device or group of device.
One configuration is composed of a key
attribute containing device name, widget, uiClass, protocol or unique identifier and as many parameter depending of device type.
{
"key": "Bedroom door",
"param1": "value1"
...
}
| Alarm parameters | Type | Default | Note |
|-------------------|-----------|---------------|-----------------------|
| stayZones
| String | 'A' | optional, active zones (A,B,C) in 'Stay' mode |
| nightZones
| String | 'B' | optional, active zones (A,B,C) in 'Night' mode |
| occupancySensor
| Boolean | false | optional, add an occupancy widget linked to the alarm |
| WindowCovering parameters | Type | Default | Note |
|---------------------------|-----------|---------------|---------------|
| defaultPosition
| Integer | 0 | optional, final position for UpDown rollershutter after any command |
| reverse
| Boolean | false | optional, reverse up/down in case of bad mounting |
| lowSpeed
| Boolean / String | false | optional, use low speed for roller shutter supporting it. If string, specify slot time with format "HH:MM-HH:MM". Low speed will be enabled between them. |
| blindMode
| String | null | optional, change main slider action to orientation. By default, both closure and orientation will be set. When setting blindMode: true
the blinds work in the following way: Opening the blinds or setting them to 100% will fully open them. Closing the blinds or setting them to 0% will fully close them. Setting the blinds to a value between 1% and 99% will first close the blinds and then adjust thier horizontal tilt in a way that 99% means fully horizonal = more light, and 1% means nearly closed = less light. |
| blindsOnRollerShutter
| Boolean | false | optional, when blinds are installed on roller shutter motors allow slats to stay horizontal (opened) at intermediate position |
| movementDuration
| Integer | 0 | optional, duration of a full shutter movement from 'open' to 'close' in seconds. Will be used to approximate shutter intermediate position. (0 = disable feature) |
| GarageDoorOpener parameters | Type | Default | Note |
|-------------------------------|---------------|---------------|-------------------|
| cyclic
| Boolean | false | optional, restore closed state after cycleDuration
seconds for stateless devices with cyclic behaviour |
| cycleDuration
| Integer | false | optional, cycle duration (in seconds) for cyclic mode (default: 5 sec) |
| reverse
| Boolean | false | optional, reverse up/down in case of bad mounting |
| pedestrianDuration
| Integer | 0 | optional, duration for pedestrian position for RTS gates |
| HeatingSystem parameters | Type | Default | Note |
|-------------------------------|---------------|---------------|-------------------|
| derogationDuration
| Integer | 1 | optional, duration (in hours) for derogation orders |
| comfort
| Integer | 19 | optional, comfort temperature used as display for heaters controled by pilot wire |
| eco
| Integer | 17 | optional, comfort temperature used as display for heaters controled by pilot wire |
Full configuration example:
{
"bridge": {
...
},
"description": "...",
"accessories": [],
"platforms":[
{
"platform": "Tahoma",
"name": "My Tahoma Bridge",
"user": "[email protected]",
"password": "MyPassw0rd",
"service": "somfy_europe",
"exclude": ["hue", "rts", "Main door", "Main door", "PositionableHorizontalAwning"],
"devicesConfig": [
{
"key": "Alarm",
"stayZones": "A,C"
},
{
"key": "Bedroom blind",
"blindMode": true
},
{
"key": "GarageDoor",
"reverse": true
},
{
"key": "UpDownRollerShutter",
"defaultPosition": 50
}
]
}
]
}
Contribute
You are welcome to contribute to this plugin development by opening an issue in case of unexpected behaviour or unsupported device.
I do not expect any reward concerning this plugin, however, some users ask me for a button as sign of contribution. Feel free to use it.