homebridge-systemair-modbus
v1.5.6
Published
Homebridge plugin to control Systemair Ventilation through ModbusTCP
Downloads
29
Readme
homebridge-systemair-modbus
This is a plugin for Homebridge. It implements a Systemair Villavent VTR300 unit connected via Modbus TCP as a HomeKit accessory and exposes the following services:
- Thermostat
- Fan
- Filter Maintenance
Installation
- Install homebridge
- Install this plugin:
npm install -g homebridge-systemair-modbus
- Update your
config.json
file (See below).
Configuration example
"accessories": [
{
"accessory": "systemairModbus", //Required. Do not change.
"host": "10.0.0.153", //Required. IP-address of the TCP to Modbus-interface.
"port": 8234, //Required. Port of the TCP to Modbus-interface.
"slave": 10, //Required. Slave address of the unit.
"pollInterval": 5, //Optional. Polling interval in seconds.
"name": "Ventilation", //Optional. Name of accessory.
"model": "VTR300", //Optional. Model of the unit.
"serial": "SN1", //Optional. Serial Number of the unit.
"temperatureDisplayUnits": 0, //Optional, 0 for Celcius and 1 for Fahrenheit.
"replacementTimeInMonthsRegister": 600, //Optional. Needs to correspond with the unit's Modbus implementation.
"elapsedDaysSinceFilterChangeRegister": 601, //Optional. Needs to correspond with the unit's Modbus implementation.
"fanSpeedLevelRegister": 100, //Optional. Needs to correspond with the unit's Modbus implementation.
"rotorRelayActiveRegister": 351, //Optional. Needs to correspond with the unit's Modbus implementation.
"temperatureSetPointLevelRegister": 206, //Optional. Needs to correspond with the unit's Modbus implementation.
"temperatureSetPointRegister": 207, //Optional. Needs to correspond with the unit's Modbus implementation.
"currentTemperatureRegister": 217, //Optional. Needs to correspond with the unit's Modbus implementation.
"temperatureScaling": 10, //Optional. Needs to correspond with the unit's Modbus implementation.
"targetTemperatureProperties": {"minValue": 12, "maxValue": 22, "minStep": 1} //Optional. Needs to correspond with the unit's Modbus implementation.
}
]