Homebridge-nut

NUT (Network UPS Tools) Plugin for Homebridge leveraging node-nut.

This plugin allows you to monitor your UPS's with HomeKit and Siri via a NUT Client.

Installation

1. Install homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g homebridge-nut
3. Update your configuration file like the example below.
4. Ensure you have a NUT Client running somewhere. For assistance - http://wynandbooysen.com/raspberry-pi-ups-server-using-nut.html.

This plugin will create a ContactSensor element with BatteryService for each USB returned from your NUT Client.

• ContactSensorState will show OPEN if UPS Status starts with OB (On Battery).
• StatusActive will be true if UPS Load is > 0.
• StatusFault will be true is NUT is not reachable.
• BatteryLevel will show the BatteryCharge percent.
• ChargingState will show Charging, Not Charging (Online and 100%), or Not Chargable (On Battery).
• StatusLowBattery will be true if low_batt_threshold is breached. This can potentially notify you prior to your Nut shutting down its server(s).
• Input/Output/Battery Voltage & BatteryLoad will be shown if available, otherwise may show 0 or default values.

Configuration

Example config.json:

"platforms": [
     {
         "platform": "Nut",
         "name": "Nut",
         "host": "localhost",
         "port": "3493",
         "search_time_delay": "1",
         "acc_delay": "100",
         "low_batt_threshold": "40",
         "polling": "120"
     }
]

Explanation:

Field | Description ------------------------|------------ platform | Required - Must always be "Nut". name | Required - Name for platform logging. host | Optional - Internal ip or hostname of Nut Client. Default is localhost. port | Optional - Port which Nut Client is listening. Default is 3493. search_time_delay | Optional - Delay on startup to list Nut devices. Defaults to 1 second. acc_delay | Optional - Delay to prevent communication collisions for multiple UPS accessories. Defaults to 100 milliseconds. low_batt_warning | Optional - Percent at which UPS will raise low battery. Default is 40. polling | Optional - Poll interval. Default is 0 sec, which is OFF or no polling.