:rotating_light: DEPRECATED :rotating_light:

homebridge-homeassistant has been deprecated since Home Assistant has natively supported HomeKit since version 0.64. For more information on how to configure native HomeKit support please see the documentation here. We STRONGLY suggest to migrate to the Home Assistant HomeKit component.

Home Assistant for Homebridge

Control your accessories from Home Assistant with Siri and HomeKit. Set it up and poof, all of your supported accessories will be instantly controllable via Siri.

Device Support

Home Assistant is a home automation platform already, so this plugin aims to just expose your devices in a way that you can control them with Siri. While you can integrate your accessories into HomeKit for automations, the goals of this plugin are strictly to allow Siri to be a frontend for your accessories.

When you set up the Home Assistant plugin, all you have to do is point it at your Home Assistant server. The plugin pulls all your devices and exposes them automatically. Easy peasey.

Here's a list of the devices that are currently exposed:

• Automations - on/off
• Alarm Control Panels - arm (home, away, night), disarm, triggered
• Binary Sensor - door, leak, moisture, motion, smoke, and window state
• Climate - current temperature, target temperature, heat/cool mode
• Cover - exposed as a garage door or window covering (see notes)
• Device Tracker - home/not home status appears as an occupancy sensor
• Fan - on/off/speed
• Group - on/off
• Input boolean - on/off
• Lights - on/off/brightness
• Lock - lock/unlock lock
• Media Players - exposed as an on/off switch
• Remotes - exposed as an on/off switch
• Scenes - exposed as an on/off switch
• Scripts - exposed as an on/off switch
• Sensors - air quality, carbon dioxide (CO2), humidity, light, temperature sensors
• Switches - on/off
• Vacuums - on/off

Alarm Control Panel Support

If your alarm control panel is setup to use a code, you must use homebridge_alarm_code to specify the code.

Binary Sensor Support

Binary Sensors must have a device_class set. Accepted device_classes are gas, moisture, motion, occupancy, opening and smoke.

For binary sensors with the gas device_class you can also set homebridge_gas_type to co or co2 or to control how the entity is shown in Homebridge (co is default).

For binary sensors with the opening device_class you can also set homebridge_opening_type to window to have the entity display as a window instead of a door to Homebridge.

Cover Support

Covers on your Home Assistant will appear as a garage door by default. In order to do change this you may specify its type in the customize section of your Home Assistant's configuration.yaml. Refer to the following example:

customize:
  cover.lounge_main:
    homebridge_cover_type: rollershutter
  cover.garage:
    homebridge_cover_type: garage_door

Device Tracker

Device trackers will appear in HomeKit as a room occupancy sensor.

Group Support

Groups will appear in HomeKit as switches.

Light Support

If supported, lights will display brightness, hue, saturation, and/or color temperature.

By default, Homebridge will allow a color temperature between 50 and 400 mireds. You can override this for your specific light(s) by using homebridge_min_mireds and homebridge_max_mireds.

Lock Support

If your lock is setup to use a code, you must use homebridge_lock_code to specify the code.

Media Player Support

Media players on your Home Assistant will be added to your HomeKit as a switch. While this seems like a hack at first, it's actually quite useful. While you can't control everything a media player does, it will give you the ability to toggle them on or off.

There are some rules to know about how on/off treats your media player. If your media player supports play/pause, then turning them on and off via HomeKit will play and pause them. If they do not support play/pause but instead support on/off they will be turned on and off. If none of the above, HomeKit will play and stop.

You can specify the mode to run by setting homebridge_media_player_switch to play_pause, on_off or play_stop, respectively.

Scene Support

Scenes will appear to HomeKit as switches. To trigger them, you can simply say "turn on party time". In some cases, scene names are already reserved in HomeKit...like "Good Morning" and "Good Night". These scenes already exist and cannot be deleted. Simply add your Home Assistant scene to them and set the state you would like them to be when executed. That's most like the ON state. The switch will automatically turn off shortly after turning on.

Script Support

Scripts containing only one service call will function exactly like scenes (see above).

Scripts containing more than one service call will be able to be turned off as well.

Sensor Support

Air quality, carbon dioxide (CO2), humidity, light and temperature sensors are currently supported.

• Air quality sensors will be found if an entity has its unit of measurement set to aqi or homebridge_sensor_type is set to air_quality on the entity.
• Light sensors will be found if an entity has its unit of measurement set to lux or homebridge_sensor_type is set to light on the entity.
• Temperature sensors will be found if an entity has its unit of measurement set to °C, ℃, °F, or ℉.
• Humidity sensors will be found if an entity has its unit of measurement set to % and has an entity ID containing humidity or homebridge_sensor_type is set to humidity on the entity.
• Carbon Dioxide (CO2) sensors will be found if an entity has its unit of measurement set to ppm and has an entity ID containing co2 or homebridge_sensor_type is set to co2 on the entity.

Switch Support

You can make a switch appear as an outlet to Homebridge by setting homebridge_switch_type to outlet on the entity.

Installation

After installing and setting up Homebridge, you can install the Home Assistant plugin with:

npm install -g homebridge-homeassistant

Once installed, update your Homebridge's config.json.

You can run sudo npm upgrade -g homebridge-homeassistant to upgrade your installation at any time.

Configuration

As with other Homebridge plugins, you configure the Home Assistant plugin by adding it to your config.json. To avoid too much information in your log, just set logging to false as soon as everything works smoothly.

"platforms": [
  {
    "platform": "HomeAssistant",
    "name": "HomeAssistant",
    "host": "http://IPADDRESS:8123",
    "password": "yourlonglifetoken",
    "supported_types": [
      "automation",
      "binary_sensor",
      "climate",
      "cover",
      "device_tracker",
      "fan",
      "group",
      "input_boolean",
      "light", "lock",
      "media_player",
      "remote",
      "scene",
      "script",
      "sensor",
      "switch",
      "vacuum"
    ],
    "default_visibility": "hidden",
    "logging": true,
    "verify_ssl": true
  }
]

You can optionally whitelist the device types that are exposed to HomeKit with the supported_types array. Just remove a device type that you don't want and they will be ignored.

Using with self signed SSL certificates

If you have set up SSL using a self signed certificate, you will need to to set verify_ssl to false in your config.json file to allow bypassing the Node.js certificate checks.

Customization

To control which entities are passed to Homebridge, you can set default_visibility to hidden or visible.

If not specified, default_visibility will be set to visible.

Then, you can control individual entities within Home Assistant using homebridge_hidden or homebridge_visible.

Example "I want all of my devices to be hidden by default and I'll choose which ones are visible to Homebridge."

"platforms": [
  {
    "default_visibility": "hidden"
  }
]

customize:
  switch.example:
    homebridge_visible: true

"I want all of my devices to be visible by default and I'll choose which ones are hidden from Homebridge."

"platforms": [
  {
    "default_visibility": "visible"
  }
]

customize:
  switch.example:
    homebridge_hidden: true

You can also customize the name of a device by setting homebridge_name like this:

customize:
  switch.a_switch:
    homebridge_name: My awesome switch

Finally, you can (optionally) specify the accessory information by setting homebridge_mfg, homebridge_model, and homebridge_serial like this:

customize:
  switch.a_switch:
    homebridge_mfg: Leviton
    homebridge_model: DZMX1-1LZ
    homebridge_serial: 123456789

If you don't specify the accessory information, the data will be pulled from Home Assistant by default.

Battery Tracking

Battery tracking is supported for binary sensors, device trackers, locks, and sensors.

homebridge_battery_source must be set to an entity with '%' as its unit of measurement.

homebridge_charging_source must set to an entity with charging as one of its possible states.

If homebridge_battery_source is specified but homebridge_charging_source is not, then HomeKit will consider the battery as not chargeable.

If necessary, you can create template sensors within Home Assistant to use for homebridge_battery_source and homebridge_charging_source.

Contributions

• fork
• create a feature branch
• open a Pull Request