flaks

v1.1.11

Published

7 months ago

reverse http/https proxy optimized for edge/outgoing traffic

Downloads

0High
0Medium
0Low

pepmartinez

proxy reverse http HA

Flaks: instrumented reverse proxy

Flaks is a reverse proxy with emphasis on instrumentation and traffic introspection. It is designed to serve at the edge, as proxy for outgoing HTTP traffic

In this sort of scenario monitoring is paramount, and so is to be able to peek on the specific req and res being proxied

Features at a glance

Building Blocks: uses http-proxy as proxy core, wich is very well tested and stable; uses also standard node.js modules for http server and http/https agents. All options and features on the building blocks are exposed for use
TLS Termination: To provide HTTP->HTTPS proxying, Flaks supports all https/tls options available at http-proxy and https agents (including CA and client certificates)
Virtual Hosts: host-based virtual hosts are spported, to provide isolated proxies selectable by Host: header
Wire Log: In addition to the usual access log, Flaks can generate wire logs of proxied calls
Prometheus Metrics: fully instrumented (using promster) at http server and http client side
req/res introspection: keeps a circular buffer of the last HTTP transactions, per upstream
Zero Downtime deployment: Flaks can be reloaded (using pm2 cluster mode) whie run inside a Docker container; additionally, it provides graceful start and shutdown
HA/LB: High availability & Load balancing is provided on upstreams with sequential and weighted-random spreading algorithms. Also, active checks can be added to remove failing upstreams from pools

Configuration

Flaks uses cascade-config for configuration support. It is set to read its config from:

{PWD}/etc/config.js
{PWD}/etc/config-{NODE_ENV:development}.js
env vars
command line arguments

Thus, flaks is usually configured with one base js file (etc/config.js) and a set of per-nodeenv js files. Alternaively, env vars and command line args can be passed to further tweak the configuration. See cascade-config for more details

Flaks configuration is based on a set of http/https agents, and a set of virtual hosts; the latter make use of the former (n-to-1). Also, each virtualhost is a set of routes where each route is defined by a regex, and contains a target

Also, some default values for configuration inside both agents and virtualhosts can be provided

HTTP/HTTPS agents

Standard (http and https) node.js agents are defined here and a key is attached to them. The key is used later to refer to agents inside virtualhosts:

module.exports = {
  agents : {
    http: {
      // http agents defined here
      agent1: {
        // standard node.js http agent here
        keepAlive: true,
        keepAliveMsecs: 10000,
        maxSockets: 1024,
        maxFreeSockets: 256,
        timeout: 120000,
      },
      agent2: {
        // standard node.js http agent here
        keepAlive: true,
        keepAliveMsecs: 10000,
        maxSockets: 16,
        maxFreeSockets: 32,
        timeout: 30000,
      },

    }
    https: {
      // http agents defined here
      agent1: {
        // standard node.js https agent here
        keepAlive: true,
        keepAliveMsecs: 10000,
        maxSockets: 1024,
        maxFreeSockets: 256,
        timeout: 120000,
        ca:    fs.readFileSync('certs/ca.pem'),
        rejectUnauthorized: false,
      },
      agent2: {
        // standard node.js https agent here
        keepAlive: true,
        keepAliveMsecs: 120000,
        maxSockets: 6,
        maxFreeSockets: 6,
        timeout: 180000,
        key:   fs.readFileSync('certs/key.pem'),
        cert:  fs.readFileSync('certs/crt.pem'),
        ca:    fs.readFileSync('certs/ca.pem'),
        rejectUnauthorized: false,
      },

    }
  },

This defines 2 http agents agent1 and agent2, and 2 https agents agent1 and agent2

Virtual Hosts

For Flaks, a virtual host is a container for routes, selectable by the content of the Host: header:

module.exports = {
  agents : {
    ...
  },
  vhosts: {
    default: {
      ...
    },
    'localhost.localdomain': {
      ...
    },
    'somehost.mydomain.org': {
      ...
    }
    ...
  }
}

As mentioned, the vhost is selected by exact coincidence with the value of the Host: header (no wildcards, no regex yet). If none matches, the vhost default is used

Then, each virtualhost is pretty much a container for routes. A route, in turn, contains an upstream (where to proxy the request) and an optional agent's name.

Once selected a virtualhost, flaks selects the route whose key matches the request's url path. If more than one matches, the one wuth the longest key (where the size is taken from the regex string size) is taken. The request is then proxied to the upstream defined on the route

For now, upstreams are simply a single target url (no load balance, no HA yet). On a edge proxy, upstream URLs are usually HA, load-balanced, so this tends to not to be a limitation

Capture groups can be specified on the route key, and then used in the upstream target

If an agent is specified in the route, it is used. Whether the agent refers to an http agent or an https agent is decided by the protocol part in the upstream url. If no agent is specified, or the specified agent does not exist, the default agent is used

Also, network-layer configuration specific to the virtualhost can be also specified

module.exports = {
  agents : {
    http: {
      agent1: {
        ...
      }
    },
    https: {
      agentA: {
        ...
      }
    }
  },
  vhosts: {
    default: {
      http: {
        routes: {
          '/a/b/c': {
            target: 'http://somewhere.else.org:8090/a',
          },
          '/b/c/d/(.*)' : {
            target: 'http://just.here.org:8090/other/$1',
            agent: 'agent1'
          },,
          '/c/(.*)/d/(.*)' : {
            target: 'https://another.place.org:8090/other/$1/$2',
            agent: 'agentA'
          },
        }
      },
      net: {
        ...
      }
    }

The route matching uses anchored regex: that is, an additional ^ is added at the beginning of the route key, if not specified already

Also, remaining trailing url path is NOT added to the target. You need to capture the remaining part explicitly

Using the config above, here's what some calls would produce:

GET /a/b/c/d?x=1&z=true : proxy GET to http://somewhere.else.org:8090/a?x=1&z=true (the /d in the path is ignored), using default http agent
GET /b/c/d/e/f?x=1&z=true : proxy GET to http://just.here.org:8090/other/e/f?x=1&z=true, using http agent agent1
GET /c/6666/d/e/f?x=1&z=true : proxy GET to https://another.place.org:8090/other/6666/e/f?x=1&z=true, using https agent agentA

Errors

if no route inside the virtualhost matches the request's url path, a http 404 is returned
if proxying to a non-listening url (upstream brings a connection refused) a http 503 error is returned
if proxying to an upstream with an unknown host (ie, host not known) a http 502 is returned
if the upstream fails to respond in time after the request was proxied, a http 504 is returned

Network Layer

Flaks allows some TCP layer configuration, both at virtualhost level (inside vhosts.{id}.net) or at top level (inside net). The supported config is:

incoming_timeout: time in milliseconds an incoming request will wait to be proxied and answered. Passed to http-proxy as timeout
outgoing_timeout: tiem in milliseconds a proxied request will wait for a response. Passed to http-proxy as proxyTimeout

Upstream Load Balance & High Availability

Flaks can specify a set of targets instead of a single target in a route definition:

vhosts: {
  default: {
    http: {
      routes: {
        '/lb0/(.*)' : {
          target: [
            'http://localhost:8098/st/504',
            'http://localhosto:8090/st/$1',
            'http://localhost:8090/st/$1'
          ],
          lb: seq|rand
          agent: 'default'
        }
      }
    }
  }
}

If more than one target is specified flaks will build a sequence of targets to try, and will try the http request on each in turn, until flaks can connect and send the request to it.

The ordering in the sequence of targets to try is build afresh on each http request, and depends on the value of routes.<route>. lb:

seqwill take targets in the order they are declared (thus would map to active-standby)
rand will impose a random ordering (which would map to a load balance)

An individual target can also be an object rather than a string, which allows the specification of more target-related aspects:

routes: {
  '/lb0/(.*)' : {
    target: [{
      url: 'http://host1:8090t/$1',
      w: 2,
      check: {
        path: '/health',
        port: 80
      }
    },{
      url: 'http://host2:8090/st/$1',
      w: 6,
      check: {
        path: '/health',
        port: 80
      }
    }

w specifies the weight of the target in the ordering of the targets for rand schema. It default to 1

checkdeclares an active check on the target. If specified, flaks will call the target using the specified path every 5 seconds; the target is deemed healthy is it returns an HTTP 200; otherwise it is deemed unhealthy and it will not be eligible for the sequence of targets

check.path must be specified
check.port allows to specify a specific port for the check; if not specified, the target port will be used

The transitions from healthy to unhealthy on a target will not impact on the ongoing http transactions to this targets: it will only impact on whether the target is considered or not for new http transactions

Extending Flaks

flaks uses internally express to build the listening http server, and it is possible to pass extra middlewares that would get added to the express app upon startup:

{
  agents: {
    ...
  },
  vhosts: {
    ...
  },
  extra_middlewares: [{
    path: '/a',
    mws: [ bodyParser.json (), new OneMW() ]
  }, {
    path: '/b',
    mws: [ bodyParser.json (), new OneMW() ]
  }]
};

Each middleware block consists on a path to apply the middleware to and an array of actual middlewares. Alternatively, instead of a middleware you can pass a middleware factory:

const mwFactory = require ('./mw-factory')

extra_middlewares: [{
  path : '/c',
  mws: [bodyParser.json (), mwFactory]    
}]

// mw-factory.js

class MW {
  constructor (opts) {
    // opts are the full configuration received by flaks
    ...
  }    

  id () {return 'some MW'}
  init (cb) {
    // get a mongodb connection, for example
    this._get mongodb (() => cb)
  }
  end (cb) {
    this._teardown (() => cb)  
  }
  mw () {
    return function (req, res, next) {
      ...
    }  
  }
}


module.exports = MW;

the factory is expected to have a mw() function which would create the actual middleware; also, it can optionally have the following lifecycle functions:

init(cb): it will be called asynchronoulsy after all flaks internal components are created. it will run, in fact, as part of the internal flow of initialization
end(cb): it will be called asynchronously as part of flaks teardown process. You can use this to free resources
id(): if present, it should return an string. It would be used to identify the MW internally, and in logging

Flaks as a library component

It is possible to use flaks as a library component in your node.js code: in a nutshell:

you will get all flaks, which is basically an express app and a http server; you can add extra middlewares to the internal express app upon creation, as part of the configuration passed
you are free to further tweak the resulting app and http-server
you run the whole thing

const flaks = require ('flaks/main');
const config = {
  agents: {
    ...
  },
  vhosts: {
    ...
  },
  extra_middlewares: [
    ...  
  ]
};

flaks.run (config, (err, context) => {
  // context contains, amongst others:
  // app: the full express app
  // server: the http server
});

The flaks.run() method will execute the full flaks, including setting the shutdown process tied to SIGINT and SIGTERM signals

For a full example with log initialization and config management you can check flaks' own index.js

Wire Logs

Flaks can generate wire logs at the upstreams, almost byte-perfect (there are some exceptions) using the config key wirelog. This can be specified at top level (as http.wirelog) or at the virtualhost (at vhosts.{id}.http.wirelog)

wirelog supports the following values:

true: generate wire log for all cases
a function (opts, req) -> boolean, where req is the http request and opts is the options object received by http-proxy at proxyReq event. If the function returnd truish, wire log is generated
An example of such function could be (opts, req) => (req.headers['x-wirelog'] == '1'), which would cause to log all http transactions whose request contains a header x-wirelog: 1

Here's an example of wire log for a single request:

2019-11-27T10:39:42.251Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > GET /z/something?a=1 HTTP/1.1
2019-11-27T10:39:42.251Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > x-forwarded-host: localhost.localdomain
2019-11-27T10:39:42.251Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > x-forwarded-proto: http
2019-11-27T10:39:42.251Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > x-forwarded-port: 80
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > x-forwarded-for: ::ffff:127.0.0.1
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > accept: */*
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > user-agent: curl/7.65.3
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > host: xana:8090
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 > x-request-id: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088
2019-11-27T10:39:42.252Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 >
[8a6e6fd0-878d-4e54-86d1-b8ffd6971088] /z/something?a=1 200
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < HTTP/1.1 200 OK
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < x-powered-by: Express
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < content-type: application/json; charset=utf-8
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < content-length: 332
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < etag: W/"14c-3sT1IUq7jCDCbkeAzqhLzfQGWZc"
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < date: Wed, 27 Nov 2019 10:39:42 GMT
2019-11-27T10:39:42.269Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < connection: keep-alive
2019-11-27T10:39:42.270Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 <
2019-11-27T10:39:42.272Z [wire:upstream] info: 8a6e6fd0-878d-4e54-86d1-b8ffd6971088 < {"q":{"a":"1"},"h":{"x-forwarded-host":"localhost.localdomain","x-forwarded-proto":"http","x-forwarded-port":"80","x-forwarded-for":"::ffff:127.0.0.1","accept":"*/*","user-agent":"curl/7.65.3","host":"xana:8090","x-request-id":"8a6e6fd0-878d-4e54-86d1-b8ffd6971088","connection":"keep-alive"},"u":"/z/something?a=1","b":{},"c":null}

Introspection

Flaks can also keep a circular buffer of the last 16 http transactions per upstream. This can be activated either globally (with http.introspect) or by virtualhost (with vhosts.{id}.http.introspect). The introspect key accepts the same values than wirelog

The contents of the circular buffers can be obtained with a GET to /status/proxy&v=1

Metrics

Flaks maintain and exports prometheus metrics:

it uses @promster/express to provide server-side and general node.js metrics
Flaks also maintains an histogram http_upstream_request_duration on upstream calls, with the following labels:
- method
- statusCode
- uri
- route
- vhost
The uri is the target url, before being expanded with regex groups (thus avoiding cardinality issues when url paths contain ids or other variable elements)

Metrics are avaialble at /metrics

Other

X-Request-Id

Flaks adds a UUIDv4 as x-request-id on all requests, if none is present. The x-request-id is then preserved at the upstream, and it is used on logs

Graceful shutdown

Flaks does graceful shutdown upon SIGINT or SIGTERM signals. Also, the listener is the last thing Flaks starts upon startup, so the moment it is listening, it's ready to be used

Cluster Mode

Although it is possible to run Flaks in cluster mode with more than one worker, bear in mind that features such as metrics or introspection are not yet custer-aware

It is OK, however, to run in cluster mode with a single worker; this is the way flaks is run in the docker image, using pm2 as cluster provider. This way, Flaks provides full zero-downtime deployment/reload

Access log

flaks generates by default an access_log on a fixed format; for now, it can be only enabled or disabled by means of http.access_log = <bool>. It is enabled by default

Defaults

Here are the defauts used by flaks, as a single object:

  var _defaults = {
    listen_port: 8080,
    http: {
      access_log: true
    },
    agents: {
      http: {
        default : {
          keepAlive: true,
          keepAliveMsecs: 10000,
          maxSockets: 1024,
          maxFreeSockets: 256,
          timeout: 120000
        }
      },
      https: {
        default : {
          keepAlive: true,
          keepAliveMsecs: 10000,
          maxSockets: 1024,
          maxFreeSockets: 256,
          timeout: 120000
        }
      },
    },
    net: {
      incoming_timeout: 120000,
      outgoing_timeout: 110000
    }
  };

Install and run

As NPM package:

npm install -g flaks

Expects configuration inside $PWD/etc/

As Docker Image

docker run \
  --name=flaks \
  -p 8080:8080  \
  -e NODE_ENV=development
  -v /path/to/config:/usr/src/app/etc \
  pepmartinez/flaks:1.0.8

See here for more details

TODO

A concise list of known to-do things (in no particular order):

more than one listener
https listeners
http2 support
circuit breakers
req/res manipulation
automation/ctrl
auth on internal paths (status, metrics)