dirty-query
v0.1.1
Published
Lightweight Query API for Node Dirty Databases
Downloads
404
Readme
node-dirty-query
A lightweight utility for querying "node dirty" databases. Adds the ability to search for models with a Query API similar to MongoDB Please report any bugs, feature requests in the issue tracker. Pull requests are welcome!
Usage
You can install with NPM: npm install dirty-query
Then simply require in your project: query = require("dirty-query").query
Use the query method like this:
db = require('dirty')('my-db')
query db, { {featured:true}, {likes: $gt:10} };
// Returns all results where the featured attribute is true and there are
// more than 10 likes
Query API (NEED TO UPDATE - CURRENTLY DESCRIBES BACKBONE QUERY)
===
### $equal
Performs a strict equality test using `===`. If no operator is provided and the query value isn't a regex then `$equal` is assumed.
```javascript
MyCollection.query({ title:"Test" });
// Returns all models which have a "title" attribute of "Test"
MyCollection.query({ title: {$equal:"Test"} }); // Same as above
$contains
Assumes that the model property is an array and searches for the query value in the array
MyCollection.query({ colors: {$contains: "red"} });
// Returns models which contain the value "red" in a "colors" attribute that is an array.
// e.g. a model with this attribute colors:["red","yellow","blue"] would be returned
$ne
"Not equal", the opposite of $equal, returns all models which don't have the query value
MyCollection.query({ title: {$ne:"Test"} });
// Returns all models which don't have a "title" attribute of "Test"
$lt, $lte, $gt, $gte
These conditional operators can be used for greater than and less than comparisons in queries
MyCollection.query({ likes: {$lt:10} });
// Returns all models which have a "likes" attribute of less than 10
MyCollection.query({ likes: {$lte:10} });
// Returns all models which have a "likes" attribute of less than or equal to 10
MyCollection.query({ likes: {$gt:10} });
// Returns all models which have a "likes" attribute of greater than 10
MyCollection.query({ likes: {$gte:10} });
// Returns all models which have a "likes" attribute of greater than or equal to 10
$between
To check if a value is in-between 2 query values use the $between operator and supply an array with the min and max value
MyCollection.query({ likes: {$between:[5,15} });
// Returns all models which have a "likes" attribute of greater than 5 and less then 15
$in
An array of possible values can be supplied using $in, a model will be returned if any of the supplied values is matched
MyCollection.query({ title: {$in:["About", "Home", "Contact"] } });
// Returns all models which have a title attribute of either "About", "Home", or "Contact"
$nin
"Not in", the opposite of $in. A model will be returned if none of the supplied values is matched
MyCollection.query({ title: {$nin:["About", "Home", "Contact"] } });
// Returns all models which don't have a title attribute of either
// "About", "Home", or "Contact"
$all
Assumes the model property is an array and only returns models where all supplied values are matched.
MyCollection.query({ colors: {$all:["red", "yellow"] } });
// Returns all models which have "red" and "yellow" in their colors attribute.
// A model with the attribute colors:["red","yellow","blue"] would be returned
// But a model with the attribute colors:["red","blue"] would not be returned
$any
Assumes the model property is an array and returns models where any of the supplied values are matched.
MyCollection.query({ colors: {$any:["red", "yellow"] } });
// Returns models which have either "red" or "yellow" in their colors attribute.
$size
Assumes the model property has a length (i.e. is either an array or a string). Only returns models the model property's length matches the supplied values
MyCollection.query({ colors: {$size:2 } });
// Returns all models which 2 values in the colors attribute
$exists or $has
Checks for the existence of an attribute. Can be supplied either true or false.
MyCollection.query({ title: {$exists: true } });
// Returns all models which have a "title" attribute
MyCollection.query({ title: {$has: false } });
// Returns all models which don't have a "title" attribute
$like
Assumes the model attribute is a string and checks if the supplied query value is a substring of the property. Uses indexOf rather than regex for performance reasons
MyCollection.query({ title: {$like: "Test" } });
//Returns all models which have a "title" attribute that
//contains the string "Test", e.g. "Testing", "Tests", "Test", etc.
$likeI
The same as above but performs a case insensitive search using indexOf and toLowerCase (still faster than Regex)
MyCollection.query({ title: {$likeI: "Test" } });
//Returns all models which have a "title" attribute that
//contains the string "Test", "test", "tEst","tesT", etc.
$regex
Checks if the model attribute matches the supplied regular expression. The regex query can be supplied without the $regex
keyword
MyCollection.query({ content: {$regex: /coffeescript/gi } });
// Checks for a regex match in the content attribute
MyCollection.query({ content: /coffeescript/gi });
// Same as above
$cb
A callback function can be supplied as a test. The callback will receive the attribute and should return either true or false.
this
will be set to the current model, this can help with tests against computed properties
MyCollection.query({ title: {$cb: function(attr){ return attr.charAt(0) === "c";}} });
// Returns all models that have a title attribute that starts with "c"
MyCollection.query({ computed_test: {$cb: function(){ return this.computed_property() > 10;}} });
// Returns all models where the computed_property method returns a value greater than 10.
For callbacks that use this
rather than the model attribute, the key name supplied is arbitrary and has no
effect on the results. If the only test you were performing was like the above test it would make more sense
to simply use MyCollection.filter
. However if you are performing other tests or are using the paging / sorting /
caching options of backbone query, then this functionality is useful.
Combined Queries
Multiple queries can be combined together. By default all supplied queries must be matched $and
. However it is possible
to specify either $or
, $nor
, $not
to implement alternate logic.
$and
MyCollection.query({ $and: { title: {$like: "News"}, likes: {$gt: 10}}});
// Returns all models that contain "News" in the title and have more than 10 likes.
MyCollection.query({ title: {$like: "News"}, likes: {$gt: 10} });
// Same as above as $and is assumed if not supplied
$or
MyCollection.query({ $or: { title: {$like: "News"}, likes: {$gt: 10}}});
// Returns all models that contain "News" in the title OR have more than 10 likes.
$nor
The opposite of $or
MyCollection.query({ $nor: { title: {$like: "News"}, likes: {$gt: 10}}});
// Returns all models that don't contain "News" in the title NOR have more than 10 likes.
$not
The opposite of $and
MyCollection.query({ $not: { title: {$like: "News"}, likes: {$gt: 10}}});
// Returns all models that don't contain "News" in the title AND DON'T have more than 10 likes.
Compound Queries
It is possible to use multiple combined queries, for example searching for models that have a specific title attribute, and either a category of "abc" or a tag of "xyz"
MyCollection.query({
$and: { title: {$like: "News"}},
$or: {likes: {$gt: 10}, color:{$contains:"red"}}
});
//Returns models that have "News" in their title and
//either have more than 10 likes or contain the color red.
Sorting
Optional sortBy
and order
attributes can be supplied as part of an options object.
sortBy
can either be a model key or a callback function which will be called with each model in the array.
MyCollection.query({title: {$like: "News"}}, {sortBy: "likes"});
// Returns all models that contain "News" in the title,
// sorted according to their "likes" attribute (ascending)
MyCollection.query({title: {$like: "News"}}, {sortBy: "likes", order:"desc"});
// Same as above, but "descending"
MyCollection.query(
{title: {$like: "News"}},
{sortBy: function(model){ return model.get("title").charAt(1);}}
);
// Results sorted according to 2nd character of the title attribute
Paging
To return only a subset of the results paging properties can be supplied as part of an options object.
A limit
property must be supplied and optionally a offset
or a page
property can be supplied.
MyCollection.query({likes:{$gt:10}}, {limit:10});
// Returns the first 10 models that have more than 10 likes
MyCollection.query({likes:{$gt:10}}, {limit:10, offset:5});
// Returns 10 models that have more than 10 likes starting
//at the 6th model in the results
MyCollection.query({likes:{$gt:10}}, {limit:10, page:2});
// Returns 10 models that have more than 10 likes starting
//at the 11th model in the results (page 2)
When using the paging functionality, you will normally need to know the number of pages so that you can render
the correct interface for the user. Backbone Query can send the number of pages of results to a supplied callback.
The callback should be passed as a pager
property on the options object. This callback will also receive the sliced
models as a second variable.
Here is a coffeescript example of a simple paging setup using the pager callback option:
class MyView extends Backbone.View
initialize: ->
@template = -> #templating setup here
events:
"click .page": "change_page"
query_collection: (page = 1) ->
#Collection should be passed in when the view is instantiated
@collection.query {category:"javascript"}, {limit:5, page:page, pager:@render_pages}
change_page: (e) =>
page_number = $(e.target).data('page_number')
@query_collection page_number
render_pages: (total_pages, results) =>
content = @template results
pages = [1..total_pages]
nav = """
<nav>
<span>Total Pages: #{total_pages}</span>
"""
for page in pages
nav += "<a href='#' data-page_number='#{page}'>#{page}</a>"
nav += "</nav>"
@$el.html content + nav
render: => @query_collection()
Caching Results
To enable caching set the cache flag to true in the options object. This can greatly improve performance when paging
through results as the unpaged results will be saved. This options is not enabled by default as if models are changed,
added to, or removed from the collection, then the query cache will be out of date. If you know
that your data is static and won't change then caching can be enabled without any problems.
If your data is dynamic (as in most Backbone Apps) then a helper cache reset method is provided:
reset_query_cache
. This method should be bound to your collections change, add and remove events
(depending on how your data can be changed).
Cache will be saved in a _query_cache
property on each collection where a cache query is performed.
MyCollection.query({likes:{$gt:10}}, {limit:10, page:1, cache:true});
//The first query will operate as normal and return the first page of results
MyCollection.query({likes:{$gt:10}}, {limit:10, page:2, cache:true});
//The second query has an identical query object to the first query, so therefore the results will be retrieved
//from the cache, before the paging paramaters are applied.
// Binding the reset_query_cache method
var MyCollection = Backbone.QueryCollection.extend({
initialize: function(){
this.bind("change", this.reset_query_cache, this);
}
});
Author
Dave Tonge - davidgtonge