config-builder

Build static, environment-specific configurations for your app.

What does this thing do, anyway?

config-builder is "yet another config utility" (or YACF, if you like acronyms). Its purpose is to build and output configuration files created using one or more base configurations, properties, or environment variables.

Configurations are hierarchical in nature--that is, they can stack on each other, overriding previous values depending on the target environment. Properties act the same way. More about this in a bit.

While other configuration packages seek to build configurations at runtime, this package assumes that you want to build all--or at least most--of your configuration at deploy time. This can help you avoid many hard-to-troubleshoot errors and catastrophic mistakes (e.g. suddenly realizing that your production app is writing everything to your staging database, or worse yet, staging writing to production!).

When you pre-build environment-specific configurations at deploy time, you know exactly what values your app is using in a given environment, and if you ever have any doubt, all you have to do is look at one file.

config-builder has a practically unlimited set of other "configurationy" uses too! Use it to build an app manifest in YAML. Generate a Dockerfile that uses a specific environmental registry. Output additional config or property files that need to be consumed elsewhere. In each case, every generated file has access to the same set of inputs (if you so desire), thus enabling config re-use across a variety of situtations. If it comes in a string, it can be configured.

In a nutshell, you can:

• Build a configuration hierarchy into one config file.
• Substitute hierarchical property references into the configuration or any string-based file.

This can help ensure separation of duties, since sensitive values (e.g. production passwords) can be stored by an ops team and later integrated into the configuration during some step of a deployment.

Installation

To install, just run npm install -g config-builder.

If you're running via an npm script, then you can list config-builder as a devDependency and then call it directly from the npm run command. npm should set the path appropriately so it "just works."

Usage

Right now, config-builder only provides a CLI, so there is no programmatic API (yet).

Usage: $0 [--option] [values]

Options (all are optional):
--configFiles                       One or more JSON files to be compiled hierarchically. Load
priority is last to first.
--propertyFiles                     One or more key/value files to be compiled hierarchically.
Load priority is last to first.
--configOut                         File or directory to which the compiled JSON config file
should be written.
--propertiesOut                     File or directory to which a compiled .properties file
should be written.
--filePairs                         A pair of files consisting of an input file that property
references and an output file or directory to which the
result should be written. Properties will be resolved via
the config and property files specified above.

Examples

Let's assume we have a base configuration that's used in development with some values that change for production.

base.json

{
  "env": "local",
  "db_config": {
    "host": "localhost",
    "port": 5432,
    "username": "dbuser",
    "password": "myreallysecurepassword"
  }
}

prod.json

{
  "env": "prod",
  "db_config": {
    "host": "db-prod.mycompany.com",
    "password": "myreallysecureprodpassword"
  }
}

For development, we can just use base.json on its own, but when we head to production, we want to overlay prod.json on top so that its values overwrite the originals from base.json.

Using config-builder, we can do that like this:

$ config-builder --configFiles base.json prod.json --configOut config.json

Result:
{
  "env": "prod",
  "db_config": {
    "host": "db-prod.mycompany.com",
    "port": 5432,
    "username": "dbuser",
    "password": "myreallysecureprodpassword"
  }
}

Using properties

Not impressed? OK, that's a relatively simple example. Let's try something a bit more complex.

In a microservice world, we'll probably have more than one app that needs to be deployed, and those apps might even need to be deployed into multiple production environments (e.g. a multi-region setup). If we're building our architecture properly, then we'll use a common naming convention for each service in the mix.

Let's assume we have these services:

• appdb-prod.mycompany.com
• appbackend-prod.mycompany.com
• appconsole-prod.mycompany.com

Since we never push code directly to production, we could replace 'prod' with a number of other test environments like 'stage', 'test', and 'dev'.

With the previous example, we'd have to build config overrides for each environment, which gets a bit tedious. But with config-builder, we can replace prod in our base config with a property reference, like target.env and then provide a properties input file with the correct replacement value.

Here's an updated base.json:

base.json

{
  "env": "${target.env}",
  "db_config": {
    "host": "localhost",
    "port": 5432,
    "username": "dbuser",
    "password": "myreallysecurepassword"
},

  "services": {
    "database": "appdb-${target.env}.mycompany.com",
    "backend": "appbackend-${target.env}.mycompany.com",
    "console": "appconsole-${target.env}.mycompany.com",
  }
}

We'll use this one-line properties file as input:

prod.properties

target.env = prod

Now, let's run config-builder again with some new options:

$ config-builder --configFiles base.json prod.json --propertyFiles prod.properties --configOut config.json

Result:
{
  "env": "prod",
  "db_config": {
    "host": "db-prod.mycompany.com",
    "port": 5432,
    "username": "dbuser",
    "password": "myreallysecureprodpassword"
  },

  "services": {
    "database": "appdb-prod.mycompany.com",
    "backend": "appbackend-prod.mycompany.com",
    "console": "appconsole-prod.mycompany.com"
  }
}

Ah! Now that's useful!

Internal property references

Property references within a config file need not only point to values from .properties files. They can also reference other portions of the config JSON structure.

For example, we can streamline our base configuration file by referencing the input target.env only once in our config file's env value. From then on, all we need do is reference ${env} elsewhere in the file. Here's the updated version.

base.json

{
  "env": "${target.env}",
  "db_config": {
    "host": "localhost",
    "port": 5432,
    "username": "dbuser",
    "password": "myreallysecurepassword"
  },

  "services": {
    "database": "appdb-${env}.mycompany.com",
    "backend": "appbackend-${env}.mycompany.com",
    "console": "appconsole-${env}.mycompany.com"
  }
}

Re-running the previous command will produce the same result.

If one property reference points to a value containing another property reference, config-builder will automatically resolve each reference in the correct order.

File pairs

config-builder can also interpolate property references in any file that can be represented as text data.

Consider this CloudFoundry deployment manifest represented as yaml:

applications:
- disk_quota: 1024M
  host:       ${app.host_name}
  name:       My cool app
  command:    null
  path:       .
  domain:     mycompany.com
  instances:  ${app.num_instances}
  memory:     256M

If we have a property file (or even a hierarchy in our primary config) that includes values for the two app namespaced properties, we can output a deployment-ready version of this file.

A possible run might look like this: $ config-builder --configFiles base.json prod.json --propertyFiles prod.properties --filePairs manifest_template.yml manifest.yml

This will work for both structured and unstructured files.

Maintainers

• Matt Hamann ([email protected])
• Ted Kirby ([email protected])