blacklight-range-limit
v8.5.0
Published
A range facet UI component plugin for blacklight
Downloads
915
Readme
BlacklightRangeLimit: integer range limiting and profiling for Blacklight applications
Description
The BlacklightRangeLimit plugin provides a 'facet' or limit for integer fields, that lets the user enter range limits with a text box or a slider, and also provides area charts giving a sense of the distribution of values (with drill down).
The primary use case of this plugin is for 'year' data, but it should work for any integer field. It may not work right for negative numbers, however.
Decimal numbers and Dates are NOT supported; they theoretically could be in the future, although it gets tricky.
Requirements
A Solr integer field. Depending on your data, it may or may not be advantageous to use a tint (trie with non-zero precision) type field.
Note on solr field types
If all your integers are the same number of digits, you can use just about any solr type, including string/type, and all will be well. But if your integers vary in digits, strings won't sort correctly, making your numbers behave oddly in partitions and limits. This is also true if you use a pre-1.4 "integer"/pint/solr.IntField field -- these are not "sortable".
You need to use a "sortable" numeric-type field. In Solr 1.4, the standard "int"/solr.TrieIntField should work fine and is probably prefered. For some distributions of data, it may be more efficient to use "tint" (solr.TrieIntField with non-zero precision).
The pre Solr 1.4 now deprecated sint or slong types should work fine too.
Installation
Current 5.x version of blacklight_range_limit
work with blacklight
5.x -- we now synchronize the major version number between blacklight
and blacklight_range_limit
. blacklight_range_limit
2.1 is the last version believed to work with blacklight 4.x or possibly blacklight 3.x.
Add
gem "blacklight_range_limit"
to your Gemfile. Run "bundle install".
Then run
rails generate blacklight_range_limit:install
This will install some asset references in your application.js and application.css.
Configuration
You have at least one solr field you want to display as a range limit, that's why you've installed this plugin. In your CatalogController, the facet configuration should look like:
config.add_facet_field 'pub_date', label: 'Publication Year', **default_range_config
You should now get range limit display. More complicated configuration is available if desired, see Range Facet Configuration below.
You can also configure the look and feel of the Flot chart using the jQuery .data() method. On the .blrl-plot-config
or .facet-limit
container you want to configure, add a Flot options associative array (documented at http://people.iola.dk/olau/flot/API.txt) as the plot-config
key. The plot-config
key to set the plot-config
key on the appropriate .blrl-plot-config
or .facet-limit
container. In order to customize the plot colors, for example, you could use this code:
$('.blacklight-year_i').data('plot-config', {
selection: { color: '#C0FF83' },
colors: ['#ffffff'],
series: { lines: { fillColor: 'rgba(255,255,255, 0.5)' }},
grid: { color: '#aaaaaa', tickColor: '#aaaaaa', borderWidth: 0 }
});
You can add this configuration in app/assets/javascript/application.js, or anywhere else loaded before the blacklight range limit javascript.
A note on AJAX use
In order to calculate distribution segment ranges, we need to first know the min and max boundaries. But we don't really know that until we've fetched the result set (we use the Solr Stats component to get min and max with a result set).
So, ordinarily, after we've gotten the result set, only then can we calculate the segment ranges, and then we need to do another Solr request to actually fetch the segment range counts.
The plugin uses an AJAX request on the result page to do this. This means that for every application results display that includes any values at all in your range field, your application will get a second AJAX http request, and make a second solr request.
If you'd like to avoid this, you can turn off segment display altogether with the :segment option below; or you can set :assumed_boundaries below to use fixed boundaries for not-yet-limited segments instead of taking boundaries from the result set.
Note that a drill-down will never require the second request, because boundaries on a drill-down are always taken from the specified limits.
Range Facet Configuration
Instead of simply passing "true", you can pass a hash with additional configuration. Here's an example with all the available keys, you don't need to use them all, just the ones you want to set to non-default values.
config.add_facet_field 'pub_date', label: 'Publication Year',
range: {
num_segments: 6,
assumed_boundaries: [1100, Time.now.year + 2],
segments: false,
maxlength: 4
}
- :num_segments :
- Default 10. Approximately how many segments to divide the range into for segment facets, which become segments on the chart. Actual segments are calculated to be 'nice' values, so may not exactly match your setting.
- :assumed_boundaries :
- Default null. For a result set that has not yet been limited, instead of taking boundaries from results and making a second AJAX request to fetch segments, just assume these given boundaries. If you'd like to avoid this second AJAX Solr call, you can set :assumed_boundaries to a two-element array of integers instead, and the assumed boundaries will always be used. Note this is live ruby code, you can put calculations in there like Time.now.year + 2.
- :segments :
- Default true. If set to false, then distribution segment facets will not be loaded at all.
- :maxlength :
- Default 4. Changes the value of the
maxlength
attribute of the text boxes, which determines how many digits can be entered.
- Default 4. Changes the value of the
Javascript dependencies
The selectable histograms/barcharts are done with Javascript, using Flot. Flot requires JQuery, as well as support for the HTML5 canvas element. For the slider, bootstrap-slider is used (bootstrap-slider is actually third party, not officially bootstrap). Flot and bootstrap-slider are both directly included in blacklight_range_limit in vendor, rather than referenced as dependencies.
The blacklight_range_limit installer will add require 'blacklight_range_limit'
to your application.js
sprockets manifest. This will include flot, bootstrap-slider, and the blacklight_range_limit glue JS.
Both flot and blacklight_range_limit's own JS depend on JQuery; the host app is expected to include JQuery; a default Blacklight-generated app already does. (Jquery 1, 2, or 3 should work)
If you don't want any of this gem's JS, you can simply remove the require 'blacklight_range_limit'
line from your application.js, and hack something else together yourself.
Touch?
For touch screens, one wants the UI to work well. The slider used is bootstrap_slider, which says if you add Modernizr to your page, touch events will be supported. We haven't tested it ourselves yet.
Also not sure how well the flot select UI works on a touch screen. The slider is probably the best touch UI anyway, if it can be made to work well.
JavaScript Customization
There are two main types of JavaScript implemented for BlacklightRangeLimit:
- Initialization and refresh of Range Limit plugin based off of events
- Range Limit plugin functionality called from event listeners
The second class of range limit functionality is customizable in your local application by overriding the specified function.
A simple example of this is overriding the display ratio used to create the histogram
BlacklightRangeLimit.display_ratio = 1
This will now create a square histogram.
Not only these variables and functions be customized, you can call them based off of custom events in your application.
$('.custom-class').on('doSomething', function() {
BlacklightRangeLimit.checkForNeededFacetsToFetch();
$(".range_limit .profile .range.slider_js").each(function() {
BlacklightRangeLimit.buildSlider(this);
});
});
Tests
Test coverage is not great, but there are some tests, using rspec. Run bundle exec rake ci
or just bundle exec rake
to seed and
start a demo jetty server, build a clean test app, and run tests.
Just bundle exec rake spec
to just run tests against an existing test app and jetty server.
Local Testing
If you want to iterate on a test locally and do not want to rebuild the required test environment every time you run the test you can set up the required server by first running:
bundle exec rake test:server
Now from another shell run your individual test as needed:
bundle exec rspec spec/features/blacklight_range_limit_spec.rb
Once you are done iterating on your test you will need to stop the application server with Ctrl-C
.
Publishing Javascript
run npm publish
to push the javascript package to https://npmjs.org/package/blacklight-range-limit
Possible future To Do
- StatsComponent replacement. We use StatsComponent to get min/max of result set, as well as missing count. StatsComponent is included on every non-drilldown request, so ranges and slider can be displayed. However, StatsComponent really can slow down the solr response with a large result set. So replace StatsComponent with other strategies. No ideal ones, we can use facet.missing to get missing count instead, but RSolr makes it harder than it should be to grab this info. We can use seperate solr queries to get min/max (sort on our field, asc and desc), but this is more complicated, more solr queries, and possibly requires redesign of AJAXy stuff, so even a lone slider can have min/max.
- tests
- In cases where an AJAX request is needed to fetch more results, don't trigger the AJAX until the range facet has actually been opened/shown. Currently it's done on page load.
- If :assumed_boundaries ends up popular, we could provide a method to fetch min and max values from entire corpus on app startup or in a rake task, and automatically use these as :assumed_boundaries.