aws-core-utils v8.1.3

Core utilities for working with Amazon Web Services (AWS), including ARNs, regions, stages, Lambdas, AWS errors, stream events, Kinesis, DynamoDB.DocumentClients, etc.

Currently includes:

• api-lambdas.js
  • Utilities for generating handler functions for and for working with AWS Lambdas that are exposed via API Gateway
    • For other AWS Lambdas that are NOT exposed via API Gateway, instead use the aws-core-utils/other-lambdas module
• other-lambdas.js
  • Utilities for generating handler functions for and for working with "other" AWS Lambdas that are NOT exposed via API Gateway and IDEALLY NOT triggered by a Kinesis or DynamoDB stream event source mapping
    • For API Gateway exposed AWS Lambdas, instead use the aws-core-utils/api-lambdas module
    • For Kinesis triggered AWS Lambdas, instead consider using the kinesis-stream-consumer module
    • For DynamoDB triggered AWS Lambdas, instead consider using the dynamodb-stream-consumer module
• arns.js
  • Utilities for working with Amazon Resource Names (ARNs)
• aws-errors.js
  • Utilities for working with AWS errors
• contexts.js
  • Utilities for configuring contexts for AWS Gateway exposed and other types of Lambdas
• dynamodb-doc-client-cache.js
  • A module-scope cache of AWS.DynamoDB.DocumentClient instances by region for Lambda.
• dynamodb-doc-client-utils.js
  • Utilities for working with AWS DynamoDB.DocumentClient.
• dynamodb-utils.js
  • Utilities for working with AWS DynamoDB.
• kinesis-cache.js
  • A module-scope cache of AWS.Kinesis instances by region for Lambda.
• kms-cache.js
  • A module-scope cache of AWS.KMS instances by region for Lambda usage.
• kms-utils.js
  • Utilities to simplify working with AWS.KMS instances.
• lambda-cache.js
  • A module-scope cache of AWS.Lambda instances by region for use within Lambda functions.
• lambda-utils.js
  • Utilities to simplify working with an AWS.Lambda instance
• lambdas.js
  • Utilities for working with AWS Lambda, which enable extraction of function names, versions and, most importantly, aliases from AWS contexts and their invoked function ARNs.
  • Utility for failing non-API Gateway Lambda's callbacks with standard AppError errors if mapping of errors to HTTP status codes is needed
• regions.js
  • Utilities for resolving the AWS region from various sources (primarily for AWS Lambda usage).
• stages.js
  • Utilities for resolving or deriving the current stage (e.g. dev, qa, prod) from various sources (primarily for AWS Lambda usage).
  • Utilities for configuration of stage handling.
  • Configurable and default functions for generating stage-qualified stream and resource names.
  • Configurable and default functions for extracting stages from stage-qualified stream and resource names.
• stream-events.js
  • Utilities for extracting information from AWS Kinesis and AWS DynamoDB stream events.

This module is exported as a Node.js module.

Installation

Using npm:

$ {sudo -H} npm i -g npm
$ npm i --save aws-core-utils

In Node.js:

• To use the api-lambdas module within your API Gateway exposed Lambda:

const apiLambdas = require('aws-core-utils/api-lambdas');
const isInstanceOf = require('core-functions/objects').isInstanceOf;
const appErrors = require('core-functions/app-errors');
const BadRequest = appErrors.BadRequest;

const createContext = () => ({}); // or your own pre-configured context

// To configure your handler to use Lambda Proxy integration and custom default response headers
const createOptions = () => require('./test/api-lambdas-context-options-2.json'); // with whatever options you want to use to configure your handler, stage handling, logging, custom settings, ...

const createSettings = () => undefined; // or whatever settings object you want to use to configure your handler, stage handling, logging, custom settings, ...

function exampleFunction(event, context) { /* ... */ } // implement and name your own function that does the actual work

const opts = {
  logRequestResponseAtLogLevel: 'INFO', 
  invalidRequestMsg: 'Invalid request ...', 
  failureMsg: 'Failed to ...', 
  successMsg: 'Finished ...'
};

// Simplest approach - generate your API Gateway exposed Lambda's handler function
exports.handler = apiLambdas.generateHandlerFunction(createContext, createSettings, createOptions, exampleFunction, opts);

// OR ... develop your own Lambda handler function (e.g. simplistic example below - see apiLamdas.generateHandlerFunction for a MUCH better version)
exports.handler = (event, awsContext, callback) => {
  const opts = {
    // logRequestResponseAtLogLevel: 'info', 
    // invalidRequestMsg: 'Invalid request ...', 
    // failureMsg: 'Failed to ...', 
    // successMsg: 'Finished ...'
  };
  
  // Configure a standard context
  let context = {};
  try {
    context = apiLambdas.configureHandlerContext(createContext, createSettings, createOptions, event, awsContext);
    
    // ... execute Lambda specific code passing the context to your functions as needed
    exampleFunction(event, context)
      .then(response => {
        context.info(opts.successMsg || 'Finished ...');
        apiLambdas.succeedLambdaCallback(callback, response, event, context);
      })
      .catch(err => {
        // Fail your Lambda callback and map the error to one of the default set of HTTP status codes:
        // i.e. [400, 401, 403, 404, 408, 429, 500, 502, 503, 504]
        if (isInstanceOf(err, BadRequest) || appErrors.getHttpStatus(err) === 400) {
          context.warn(opts.invalidRequestMsg || 'Invalid request ...', err.message);
        } else {
          context.error(opts.failureMsg || 'Failed to ...', err);
        }
        apiLambdas.failLambdaCallback(callback, err, event, context);
      });
  
  } catch (err) {
    // Fail your Lambda callback and map the error to one of the default set of HTTP status codes:
    // i.e. [400, 401, 403, 404, 408, 429, 500, 502, 503, 504]
    context.error('Failed to ...', err);
    apiLambdas.failLambdaCallback(callback, err, event, context);
  }
};

// ALTERNATIVE handler options for `succeedLambdaCallback` & `failLambdaCallback`: 

// Fail your Lambda callback: using Lambda Proxy integration; using a custom response header; and map the error to one of a specified set of HTTP status codes
context.handler = { // simplistic example - should rather be set through an appropriate `context-options.json` file
  useLambdaProxy: true,
  defaultHeaders: {MyCustomHeader: 'MyCustomHeaderValue'},
  allowedHttpStatusCodes: [400, 404, 418, 500, 508]
};
apiLambdas.failLambdaCallback(callback, new Error('Boom'), event, context);

• To use the AWS ARN utilities

const arns = require('aws-core-utils/arns');

const arnComponent = arns.getArnComponent(arn, index);
const arnPartition = arns.getArnPartition(arn);
const arnService = arns.getArnService(arn);
const arnRegion = arns.getArnRegion(arn);
const arnAccountId = arns.getArnAccountId(arn);
const arnResources = arns.getArnResources(arn);

assert(arnComponent && arnPartition && arnService && arnRegion && arnAccountId && arnResources);

• To use the AWS errors utilities

const awsErrors = require('aws-core-utils/aws-errors');

assert(awsErrors);

• To use the contexts.js module:

// To use the configureStandardContext function, please refer to the 'To use the `api-lambdas` module' example above
// (since the `api-lambdas.js` module simply re-exports the `contexts.js` module's configureStandardContext)

// ALTERNATIVELY if you need the logic of the configureStandardContext function for custom purposes
const contexts = require('aws-core-utils/contexts');
const context = {};
const standardOptions = require('my-standard-options.json'); // or whatever options you want to use to configure stage handling, logging, custom settings, ...
const standardSettings = {}; // or whatever settings you want to use to configure stage handling, logging, custom settings, ...
contexts.configureStandardContext(context, standardSettings, standardOptions, awsEvent, awsContext);

// If you need the logic of the configureCustomSettings function, which is used by configureStandardContext, for other purposes
const myCustomSettings = {myCustomSetting1: 1, myCustomSetting2: 2, myCustomFunction: () => {}};
console.log(`Irrelevant logging - only added to avoid unused function warning - ${myCustomSettings.myCustomFunction()}`);
const myCustomOptions = require('my-custom-options.json');
contexts.configureCustomSettings(context, myCustomSettings, myCustomOptions);
console.log(`context.custom = ${JSON.stringify(context.custom)}; myCustomFunction = ${JSON.stringify(context.custom.myCustomFunction)} `);

• To use the DynamoDB.DocumentClient cache to configure and cache an AWS DynamoDB.DocumentClient instance per region

const dynamoDBDocClientCache = require('aws-core-utils/dynamodb-doc-client-cache');

// Preamble to create a context and configure logging on the context
const context = {};
const logging = require('logging-utils');
logging.configureLogging(context); // or your own custom logging configuration (see logging-utils README.md)

// Define the DynamoDB.DocumentClient's constructor options that you want to use, e.g.
const dynamoDBDocClientOptions = {
  // See http://docs.aws.amazon.com/AWSJavaScriptSDK/latest/AWS/DynamoDB/DocumentClient.html#constructor-property
  // and http://docs.aws.amazon.com/AWSJavaScriptSDK/latest/AWS/DynamoDB.html#constructor-property
  maxRetries: 0
  // ...
};

// To create and cache a new AWS DynamoDB.DocumentClient instance with the given DynamoDB.DocumentClient constructor 
// options for either the current region or the region specified in the given options OR reuse a previously cached 
// DynamoDB.DocumentClient instance (if any) that is compatible with the given options
const dynamoDBDocClient = dynamoDBDocClientCache.setDynamoDBDocClient(dynamoDBDocClientOptions, context);

// To configure a new AWS.DynamoDB.DocumentClient instance (or re-use a cached instance) on a context 
dynamoDBDocClientCache.configureDynamoDBDocClient(context, dynamoDBDocClientOptions);
console.log(context.dynamoDBDocClient);

// To get a previously set or configured AWS DynamoDB.DocumentClient instance for the current AWS region
const dynamoDBDocClient1 = dynamoDBDocClientCache.getDynamoDBDocClient();
// ... or for a specified region
const dynamoDBDocClient2 = dynamoDBDocClientCache.getDynamoDBDocClient('us-west-2');

// To get the original options that were used to construct a cached AWS DynamoDB.DocumentClient instance for the current or specified AWS region
const optionsUsed1 = dynamoDBDocClientCache.getDynamoDBDocClientOptionsUsed();
const optionsUsed2 = dynamoDBDocClientCache.getDynamoDBDocClientOptionsUsed('us-west-1');

// To delete and remove a cached DynamoDB.DocumentClient instance from the cache
const deleted = dynamoDBDocClientCache.deleteDynamoDBDocClient('eu-west-1');

assert(dynamoDBDocClient && dynamoDBDocClient1 && dynamoDBDocClient2 && optionsUsed1 && optionsUsed2 && deleted);

• To use the Kinesis cache to configure and cache an AWS Kinesis instance per region

const kinesisCache = require('aws-core-utils/kinesis-cache');

// Preamble to create a context and configure logging on the context
const context = {};
const logging = require('logging-utils');
logging.configureLogging(context); // or your own custom logging configuration (see logging-utils README.md)

// Define the Kinesis constructor options that you want to use, e.g.
const kinesisOptions = {
  // See http://docs.aws.amazon.com/AWSJavaScriptSDK/latest/AWS/Kinesis.html#constructor-property for full details
  maxRetries: 0
  // ...
};

// To create and cache a new AWS Kinesis instance with the given Kinesis constructor options for either the current 
// region or the region specified in the given options OR reuse a previously cached Kinesis instance (if any) that is 
// compatible with the given options
const kinesis = kinesisCache.setKinesis(kinesisOptions, context);

// To configure a new AWS.Kinesis instance (or re-use a cached instance) on a context 
kinesisCache.configureKinesis(context, kinesisOptions);
console.log(context.kinesis);

// To get a previously set or configured AWS Kinesis instance for the current AWS region
const kinesis1 = kinesisCache.getKinesis();
// ... or for a specified region
const kinesis2 = kinesisCache.getKinesis('us-west-2');

// To get the original options that were used to construct a cached AWS Kinesis instance for the current or specified AWS region
const optionsUsed1 = kinesisCache.getKinesisOptionsUsed();
const optionsUsed2 = kinesisCache.getKinesisOptionsUsed('us-west-1');

// To delete and remove a cached Kinesis instance from the cache
const deleted = kinesisCache.deleteKinesis('eu-west-1');

assert(kinesis && kinesis1 && kinesis2 && optionsUsed1 && optionsUsed2 && deleted);

• To use the KMS cache to configure and cache an AWS KMS instance per region

const kmsCache = require('aws-core-utils/kms-cache');

// Preamble to create a context and configure logging on the context
const context = {};
const logging = require('logging-utils');
logging.configureLogging(context); // or your own custom logging configuration (see logging-utils README.md)

// Define the KMS constructor options that you want to use, e.g.
const kmsOptions = {
  // See http://docs.aws.amazon.com/AWSJavaScriptSDK/latest/AWS/KMS.html#constructor-property for full details
  maxRetries: 0
  // ...
};

// To create and cache a new AWS KMS instance with the given KMS constructor options for either the current 
// region or the region specified in the given options OR reuse a previously cached KMS instance (if any) that is 
// compatible with the given options
const kms = kmsCache.setKMS(kmsOptions, context);

// To configure a new AWS.KMS instance (or re-use a cached instance) on a context 
kmsCache.configureKMS(context, kmsOptions);
console.log(context.kms);

// To get a previously set or configured AWS KMS instance for the current AWS region
const kms1 = kmsCache.getKMS();
// ... or for a specified region
const kms2 = kmsCache.getKMS('us-west-2');

// To get the original options that were used to construct a cached AWS KMS instance for the current or specified AWS region
const optionsUsed1 = kmsCache.getKMSOptionsUsed();
const optionsUsed2 = kmsCache.getKMSOptionsUsed('us-west-1');

// To delete and remove a cached KMS instance from the cache
const deleted = kmsCache.deleteKMS('eu-west-1');

assert(kms && kms1 && kms2 && optionsUsed1 && optionsUsed2 && deleted);

• To use the AWS.KMS utilities

const kmsUtils = require('aws-core-utils/kms-utils');

const kms = new AWS.KMS({region: 'eu-west-1'}); // or better yet use kms-cache module as above

// Preamble to create a context and configure logging on the context
const logging = require('logging-utils');
const logger = logging.configureLogging({}); // or your own custom logging configuration (see logging-utils README.md)

const accountId = 'XXXXXXXXXXXX'; // use your AWS account ID
const kmsKeyAlias = 'aws/lambda'; // or use your own key alias
const keyId = `arn:aws:kms:us-west-2:${accountId}:alias/${kmsKeyAlias}`;

// To encrypt plaintext using KMS:
const plaintext = 'Shhhhhhhhhhhhhhh'; // use your own plaintext
kmsUtils.encryptKey(kms, keyId, plaintext, logger)
  .then(ciphertextBase64 => console.log(JSON.stringify(ciphertextBase64)));

// To decrypt ciphertext using KMS:
const ciphertextBase64 = '...'; // use your own ciphertext
kmsUtils.decryptKey(kms, ciphertextBase64, logger)
  .then(plaintext => console.log(JSON.stringify(plaintext)));

// To encrypt plaintext using KMS:
const encryptParams = {KeyId: keyId, Plaintext: plaintext};
kmsUtils.encrypt(kms, encryptParams, logger)
  .then(result => console.log(JSON.stringify(result)));

// To decrypt ciphertext using KMS:
const decryptParams = {CiphertextBlob: new Buffer(ciphertextBase64, 'base64')};
kmsUtils.decrypt(kms, decryptParams, logger)
  .then(result => console.log(JSON.stringify(result)));

• To use the Lambda cache to configure and cache an AWS Lambda instance per region

const lambdaCache = require('aws-core-utils/lambda-cache');

// Preamble to create a context and configure logging on the context
const context = {};
const logging = require('logging-utils');
logging.configureLogging(context); // or your own custom logging configuration (see logging-utils README.md)

// Define the Lambda constructor options that you want to use, e.g.
const lambdaOptions = {
  // See http://docs.aws.amazon.com/AWSJavaScriptSDK/latest/AWS/Lambda.html#constructor-property for full details
  maxRetries: 0
  // ...
};

// To create and cache a new AWS Lambda instance with the given Lambda constructor options for either the current 
// region or the region specified in the given options OR reuse a previously cached Lambda instance (if any) that is 
// compatible with the given options
const lambda = lambdaCache.setLambda(lambdaOptions, context);

// To configure a new AWS.Lambda instance (or re-use a cached instance) on a context 
lambdaCache.configureLambda(context, lambdaOptions);
console.log(context.lambda);

// To get a previously set or configured AWS Lambda instance for the current AWS region
const lambda1 = lambdaCache.getLambda();
// ... or for a specified region
const lambda2 = lambdaCache.getLambda('us-west-2');

// To get the original options that were used to construct a cached AWS Lambda instance for the current or specified AWS region
const optionsUsed1 = lambdaCache.getLambdaOptionsUsed();
const optionsUsed2 = lambdaCache.getLambdaOptionsUsed('us-west-1');

// To delete and remove a cached Lambda instance from the cache
const deleted = lambdaCache.deleteLambda('eu-west-1');

assert(lambda && lambda1 && lambda2 && optionsUsed1 && optionsUsed2 && deleted);

• To use the AWS.Lambda utilities

const lambdaUtils = require('aws-core-utils/lambda-utils');

const lambda = new AWS.Lambda({region: 'eu-west-1'}); // or better yet use lambda-cache module as above

// To list the event source mappings on your Lambda function
const params = {FunctionName: 'my-lambda-function'};
lambdaUtils.listEventSourceMappings(lambda, params, context)
  .then(result => console.log(JSON.stringify(result)));

// To update an event source mapping on your Lambda function
const params2 = {FunctionName: 'my-lambda-function', UUID: uuid, BatchSize: 99};
lambdaUtils.updateEventSourceMapping(lambda, params2, context)
  .then(result => console.log(JSON.stringify(result)));

// To disable an event source mapping on your Lambda function
lambdaUtils.disableEventSourceMapping(lambda, 'my-lambda-function', uuid, context)
  .then(result => console.log(JSON.stringify(result)));

• To use the Lambda utilities

const lambdas = require('aws-core-utils/lambdas');

// To resolve the Lambda alias from an AWS Lambda context
const alias = lambdas.getAlias(awsContext);

// To extract other details from an AWS Lambda context
const functionName = lambdas.getFunctionName(awsContext);
const functionVersion = lambdas.getFunctionVersion(awsContext);
const functionNameVersionAndAlias = lambdas.getFunctionNameVersionAndAlias(awsContext);
const invokedFunctionArn = lambdas.getInvokedFunctionArn(awsContext);
const invokedFunctionArnFunctionName = lambdas.getInvokedFunctionArnFunctionName(awsContext);

assert(alias && functionName && functionVersion && functionNameVersionAndAlias && invokedFunctionArn && invokedFunctionArnFunctionName);

• To get the current AWS region & configure it on a context

const regions = require('aws-core-utils/regions');

// To get the current AWS region of your Lambda
const region = regions.getRegion();

// To configure a context with the current AWS region
const context = {};
const failFast = true;
regions.configureRegion(context, failFast);
assert(context.region && typeof context.region === 'string');

• To use the stage utilities

// To configure stage-handling, which determines the behaviour of the functions numbered 1 to 6 below
const stages = require('aws-core-utils/stages');
const settings = undefined; // ... or your own custom settings
const options = require('aws-core-utils/stages-options.json'); // ... or your own custom options

// ... EITHER using the default stage handling configuration and default logging configuration 
stages.configureDefaultStageHandling(context); 
// ... OR using the default stage handling configuration and default logging configuration partially customised via stageHandlingOptions, otherSettings & otherOptions
const stageHandlingOptions = require('aws-core-utils/stages-options.json').stageHandlingOptions; // example ONLY - use your own custom stage handling options if needed
const otherSettings = undefined; // or to configure your own underlying logger use: const otherSettings = {loggingSettings: {underlyingLogger: myCustomLogger}};
const otherOptions = require('aws-core-utils/test/sample-standard-options.json'); // example ONLY - use your own custom standard options file
const forceConfiguration = false;
stages.configureDefaultStageHandling(context, stageHandlingOptions, otherSettings, otherOptions, forceConfiguration); 

// ... OR using your own custom stage-handling configuration
const stageHandlingSettings = stages.getDefaultStageHandlingSettings(options.stageHandlingOptions);
// Optionally override the default stage handling functions with your own custom functions
// stageHandlingSettings.customToStage = undefined;
// stageHandlingSettings.convertAliasToStage = stages.DEFAULTS.convertAliasToStage;
// stageHandlingSettings.injectStageIntoStreamName = stages.DEFAULTS.toStageSuffixedStreamName;
// stageHandlingSettings.extractStageFromStreamName = stages.DEFAULTS.extractStageFromSuffixedStreamName;
// stageHandlingSettings.injectStageIntoResourceName = stages.DEFAULTS.toStageSuffixedResourceName;
// stageHandlingSettings.extractStageFromResourceName = stages.DEFAULTS.extractStageFromSuffixedResourceName;
stages.configureStageHandling(context, stageHandlingSettings, stageHandlingOptions, otherSettings, otherOptions, forceConfiguration);

// ... OR using completely customised stage handling settings
const stageHandlingSettings2 = {
    envStageName: myEnvStageName,
    customToStage: myCustomToStageFunction, // or undefined if not needed
    convertAliasToStage: myConvertAliasToStageFunction, // or undefined to knockout using AWS aliases as stages

    injectStageIntoStreamName: myInjectStageIntoStreamNameFunction, 
    extractStageFromStreamName: myExtractStageFromStreamNameFunction,
    streamNameStageSeparator: myStreamNameStageSeparator,

    injectStageIntoResourceName: myInjectStageIntoResourceNameFunction,
    extractStageFromResourceName: myExtractStageFromResourceNameFunction,
    resourceNameStageSeparator: myResourceNameStageSeparator,

    injectInCase: myInjectInCase,
    extractInCase: myExtractInCase,

    defaultStage: myDefaultStage, // or undefined
};
stages.configureStageHandling(context, stageHandlingSettings2, undefined, otherSettings, otherOptions, forceConfiguration);

// ... OR using custom stage handling settings and/or options and configuring dependencies at the same time
stages.configureStageHandling(context, stageHandlingSettings, stageHandlingOptions, otherSettings, otherOptions, forceConfiguration);

// To check if stage handling is configured
const configured = stages.isStageHandlingConfigured(context);

// To look up stage handling settings and functions
const settingName = 'injectInCase'; // example stage handling setting name
const setting = stages.getStageHandlingSetting(context, settingName);

const functionSettingName = 'convertAliasToStage'; // example stage handling function name
const fn = stages.getStageHandlingFunction(context, functionSettingName);

// 1. To resolve / derive a stage from an AWS event
const context = {};
const stage = stages.resolveStage(awsEvent, awsContext, context);

// 2. To configure a context with a resolved stage (uses resolveStage)
const failFast = true;
stages.configureStage(context, awsEvent, awsContext, failFast);
assert(context.stage && typeof context.stage === 'string');

// 3. To extract a stage from a qualified stream name
const qualifiedStreamName = 'TestStream_PROD';
const stage2 = stages.extractStageFromQualifiedStreamName(qualifiedStreamName, context);
assert(stage2 === 'prod'); // assuming default stage handling configuration

// 4. To qualify an unqualified stream name with a stage
const unqualifiedStreamName = 'TestStream';
const stageQualifiedStreamName = stages.toStageQualifiedStreamName(unqualifiedStreamName, stage2, context);
assert(stageQualifiedStreamName === 'TestStream_PROD'); // assuming default stage handling configuration

// 5. To extract a stage from a qualified resource name
const qualifiedTableName = 'TestTable_QA';
const stage3 = stages.extractStageFromQualifiedResourceName(qualifiedTableName, context);
assert(stage3 === 'qa'); // assuming default stage handling configuration

// 6. To qualify an unqualified resource name with a stage
const unqualifiedTableName = 'TestTable';
const stageQualifiedResourceName = stages.toStageQualifiedResourceName(unqualifiedTableName, stage3, context);
assert(stageQualifiedResourceName === 'TestTable_QA'); // assuming default stage handling configuration

• To use the stream event utilities

const streamEvents = require('aws-core-utils/stream-events');

// To extract event soure ARNs from AWS events 
const eventSourceARNs = streamEvents.getEventSourceARNs(event);

// To extract Kinesis stream names from AWS events and event records
const eventSourceStreamNames = streamEvents.getKinesisEventSourceStreamNames(event);
const eventSourceStreamName = streamEvents.getKinesisEventSourceStreamName(record);

// To extract DynamoDB table names from DynamoDB stream event records
const dynamoDBEventSourceTableName = streamEvents.getDynamoDBEventSourceTableName(record);

// To extract DynamoDB table names and stream timestamps/suffixes from DynamoDB stream event records
const tableNameAndStreamTimestamp = streamEvents.getDynamoDBEventSourceTableNameAndStreamTimestamp(record);
const dynamoDBEventSourceTableName1 = tableNameAndStreamTimestamp[0];
const dynamoDBEventSourceStreamTimestamp = tableNameAndStreamTimestamp[1];

// Simple checks to validate existance of some of the properties of Kinesis & DynamoDB stream event records
try {
  streamEvents.validateStreamEventRecord(record);
  streamEvents.validateKinesisStreamEventRecord(record);
  streamEvents.validateDynamoDBStreamEventRecord(record);
} catch (err) { 
  // ... 
}

Unit tests

This module's unit tests were developed with and must be run with tape. The unit tests have been tested on Node.js v6.10.3.

Install tape globally if you want to run multiple tests at once:

$ npm install tape -g

Run all unit tests with:

$ npm test

or with tape:

$ tape test/*.js

See the package source for more details.

Changes

See CHANGES.md