autossh

Persistent SSH tunnels for Node.js

Install

Using npm

npm i -S autossh

Usage

To Start

const autossh = require('autossh');

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432
});

...is equivalent to...

ssh -NL 64444:localhost:5432 -o "ExitOnForwardFailure yes" -o ServerAliveInterval=120 -o ServerAliveCountMax=1 [email protected]

Event Listeners

Autossh inherits from node.js's EventEmitter, and implements three events: error, timeout, connect

error

The error event will fire anytime there is an error throughout the life of the autossh process.

timeout

Normally, a timeout would be an error, but autossh treats it as a separate event. The timeout event will fire anytime there is a timeout error throughout the life of the autossh process.

Autossh will automatically attempt to re-establish a connection.

connect

The connect event will fire only once when the initial ssh connection is made. The callback's first argument is connection object which contains the following properties:

• kill - a method to kill autossh
• pid - the autossh process id
• host
• localHost - The host, to which the tunnel applies.
• username
• remotePort
• localPort
• execString - the autossh command string

Example 1

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432
})
.on('error', err => {
  console.error('ERROR: ', err);
})
.on('connect', connection => {
  console.log('Tunnel established on port ' + connection.localPort);
  console.log('pid: ' + connection.pid);
});

Example 2

const autosshClient = autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432
});

autosshClient.on('error', err => {
  console.error('ERROR: ', err);
  autosshClient.kill();
});

autosshClient.on('timeout', connection => {
  console.warn('Connection to ' + connection.host + ' timed out.');
});

autosshClient.on('connect', connection => {
  console.log('Tunnel established on port ' + connection.localPort);
  console.log('pid: ' + connection.pid);
});

Generate Dynamic Local Port

If you want to dynamically/randomly generate a port number, provide a string auto for the localPort.

The major benefit is that port conflicts will automatically be avoided--the generated port will not have been in use.

The generated localPort can be accessed from the connection object as localPort.

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432
})
.on('connect', connection => {
  console.log('connected: ', connection);
  console.log('localPort: ', connection.localPort);
});

Tunneling Ports from another Host

It is also possible to use the tunnel as gateway to another host in the local network (for example a webcam).

By default, the localHost property is set to localhost, but you can overwrite it.

Note that setting this property to a value different from localhost will make the tunnel reverse automaticly.

autossh({
  host: '111.22.333.444',
  localhost: '192.168.1.25',
  username: 'root',
  localPort: '64444',
  remotePort: 5432
})
.on('connect', connection => {
  console.log('connected: ', connection);
});

Killing the Autossh Process

The autossh process will automatically die if the node process is closed, but you can manually kill the process using kill.

If you try to kill the ssh process from the command line while the node process is active, a new ssh tunnel will be established (which is the point of autossh). You will need to kill the node process first or call the kill method on the instance.

Example 1

const myAutossh = autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432
})
.on('connect', connection => {
  console.log('connected: ', connection);
});

myAutossh.kill();

Example 2

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432
})
.on('connect', connection => {
  console.log('connected: ', connection);
  connection.kill();
});

Adjusting serverAliveInterval and serverAliveCountMax

These two options are the bread and butter butter as far as polling the ssh connection.

Basically, serverAliveInterval is an interval (in seconds) for how often we should ping the ssh connection and check if the connection is established.

The serverAliveCountMax is a count for how many failed serverAliveInterval checks until we close the connection.

For example, if serverAliveInterval=10 and serverAliveCountMax=1 then the ssh connection would be checked every 10 seconds, and if there is 1 failure, then close (and, in the case of autossh, restart) the connection. If the connection never fails, then there will be no restart.

One more example, if serverAliveInterval=5 and serverAliveCountMax=0 then the ssh connection would be checked every 5 seconds, and if there are 0 failures, then close and restart the connection. The 0 means it doesn't care if there is a failure or not--close (and restart) every 5 seconds, regardless!

The default values are serverAliveInterval=120 (120 seconds) and serverAliveCountMax=1.

You can set these options in the object you pass to autossh.

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432,
  serverAliveInterval: 30,
  serverAliveCountMax: 1
})
.on('connect', connection => {
  console.log('connected: ', connection);
  console.log('localPort: ', connection.localPort);
});

Specifying the Private Key File

Select a file from which the identity (private key) for public key authentication is read. The default is ~/.ssh/id_rsa.

You can set the private file path as privateKey in the object you pass to autossh.

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 64444,
  remotePort: 5432,
  privateKey: '~/.ssh/github_rsa'
})
.on('error', err => {
  console.error('ERROR: ', err);
})
.on('connect', connection => {
  console.log('Tunnel established on port ' + connection.localPort);
  console.log('pid: ' + connection.pid);
});

Setting up a Reverse (Remote) Tunnel

To set up a reverse tunnel set reverse to true in the config object.

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 22,
  remotePort: 5432,
  reverse: true
})
.on('error', err => {
  console.error('ERROR: ', err);
})
.on('connect', connection => {
  console.log('connection pid: ' + connection.pid);
});

When using the reverse tunnel option, the localPort value cannot be 'auto'.

Adjusting/Disabling Max Poll Count

When first trying to establish the ssh tunnel, autoshh will poll the local port until the connection has been established. The default max poll count is 30.

Adjusting the max poll count

Set the maxPollCount property in the object passed to autossh:

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432,
  maxPollCount: 50
})
.on('connect', connection => {
  console.log('connected: ', connection);
});

Disabling the max poll count

Set the maxPollCount property to 0 or false in the object passed to autossh:

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432,
  maxPollCount: false
})
.on('connect', connection => {
  console.log('connected: ', connection);
});

Warning: The max poll count is there to prevent autossh from infinitely polling the local port. Rather than disabling it, it may be wise to set it to a high number (e.g. 500).

Adjusting Poll Timeout

Autossh will attempt to establish a connection every n milliseconds until a connection is established. To increase the time between each attempt, set the pollTimeout option in the configuration.

The following will attempt to connect every second (1000 ms) up to 50 times before giving up:

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432,
  maxPollCount: 50,
  pollTimeout: 1000
})
.on('connect', connection => {
  console.log('connected: ', connection);
})

Specifying a Different SSH Port

The designated port for SSH according to the Transmission Control Protocol (TCP) is port 22, but you can specify a different port if you are using a different port. Set the sshPort property in the object you pass to autossh.

autossh({
  host: '111.22.333.444',
  username: 'root',
  localPort: 'auto',
  remotePort: 5432,
  sshPort: 9999
});