Angular2-IonicToken

This is a fork of Angular2-Token, changed to work with Ionic.

Ionic does not use the Angular 2 Router, so references to that have been removed.

This is work in progress.

Angular2-Token

Token based authentication service for Angular2 with multiple user support. Angular2-Token works best with the devise token auth gem for Rails. Angular2-Token is currently in Alpha. Any contribution is much appreciated.

You can try out Angular2-Token here.

The repository can be found here.

Installation

Requirements

• Webpack (SystemJS not tested)

1. Install Angular2-Token via NPM with

   npm install angular2-token

2. Import and add Angular2TokenService to your main module. Angular2TokenService depends on HttpModule and RouterModule, so make sure you import them too.

   import { Angular2TokenService } from 'angular2-token';
   
   @NgModule({
       imports: [
           BrowserModule,
           HttpModule,
           RouterModule
       ],
       declarations: [ AppComponent ],
       providers:    [ Angular2TokenService ],
       bootstrap:    [ AppComponent ]
   })

3. Inject Angular2TokenService into your main component and call .init().

   constructor(private _tokenService: Angular2TokenService) {
       this._tokenService.init();
   }

Quickstart (αlpha)

Quickstart includes the necessary forms and routing to quickly use Angular2-Token with your Project. A live demo can be found here.

Quickstart is currently in αlpha, please use with caution.

1. Add A2tUiModule to your main module.

   import { Angular2TokenService, A2tUiModule } from 'angular2-token';
   
   @NgModule({
       imports: [
           BrowserModule,
           HttpModule,
           RouterModule,
           A2tUiModule
       ],
       declarations: [ AppComponent ],
       providers:    [ Angular2TokenService ],
       bootstrap:    [ AppComponent ]
   })

The A2tUiModule adds the following routes to your project:

| Route | Description | | -------------------------- | ---------------------------------------- | | session/sign-in | Sign in form | | session/sign-up | Sign out form | | session/reset-password | Reset password form | | session/update-password | Update password for email redirect |

On successful sign in the user will be redirect to restricted.

Content

• Configuration
• Service Methods
  • .signIn()
  • .signOut()
  • .registerAccount()
  • .deleteAccount()
  • .validateToken()
  • .updatePassword()
  • .resetPassword()
  • .signInOAuth()
  • .processOAuthCallback()
• HTTP Service Wrapper
• Multiple User Types
• Route Guards
• Advanced Usage
  • .sendHttpRequest()
  • .userSignedIn()
  • .currentUserType
  • .currentUserData
  • .currentAuthData
• Common Problems
• Development
  • Testing
  • Credits
  • License

Configuration

Configuration options can be passed as Angular2TokenOptions via .init().

Default Configuration

constructor(private _tokenService: Angular2TokenService) {
    this._tokenService.init({
        apiBase:                    null,
        apiPath:                    null,

        signInPath:                 'auth/sign_in',
        signInRedirect:             null,
        signInStoredUrlStorageKey:  null,

        signOutPath:                'auth/sign_out',
        validateTokenPath:          'auth/validate_token',
        signOutFailedValidate:      false,

        registerAccountPath:        'auth',
        deleteAccountPath:          'auth',
        registerAccountCallback:    window.location.href,

        updatePasswordPath:         'auth',
        resetPasswordPath:          'auth/password',
        resetPasswordCallback:      window.location.href,

        oAuthBase:                  window.location.origin,
        oAuthPaths: {
            github:                 'auth/github'
        },
        oAuthCallbackPath:          'oauth_callback',
        oAuthWindowType:            'newWindow',
        oAuthWindowOptions:         null,

        userTypes:                  null,

        globalOptions: {
            headers: {
                'Content-Type':     'application/json',
                'Accept':           'application/json'
            }
        }
    });
}

| Options | Description | | --------------------------------------- | ---------------------------------------- | | apiBase?: string | Sets the server for all API calls. | | apiPath?: string | Sets base path all operations are based on | | signInPath?: string | Sets path for sign in | | signInRedirect?: string | Sets redirect path for failed CanActivate | | signInStoredUrlStorageKey?: string | Sets locale storage key to store URL before displaying signIn page | | signOutPath?: string | Sets path for sign out | | validateTokenPath?: string | Sets path for token validation | | signOutFailedValidate?: boolean | Signs user out when validation returns a 401 status | | registerAccountPath?: string | Sets path for account registration | | deleteAccountPath?: string | Sets path for account deletion | | registerAccountCallback?: string | Sets the path user are redirected to after email confirmation for registration | | updatePasswordPath?: string | Sets path for password update | | resetPasswordPath?: string | Sets path for password reset | | resetPasswordCallback?: string | Sets the path user are redirected to after email confirmation for password reset | | userTypes?: UserTypes[] | Allows the configuration of multiple user types (see Multiple User Types) | | globalOptions?: GlobalOptions | Allows the configuration of global options (see below) | | oAuthBase?: string | Configure the OAuth server (used for backends on a different url) | | oAuthPaths?: { [key:string]: string } | Sets paths for sign in with OAuth | | oAuthCallbackPath?: string | Sets path for OAuth sameWindow callback | | oAuthWindowType?:string | Window type for Oauth authentication | |oAuthWindowOptions?: { [key:string]: string }| Set additional options to pass intowindow.open()` |

Global Options

| Options | Description | | ------------------------------------- | ----------------------------------------------- | | headers?: { [key:string]: string; } | Define custom global headers as hashmap. Be careful when overwriting the default options, devise token auth will refuse requests without the Content-Type-Header set |

Further information on paths/routes can be found at devise token auth

Service Methods

Once initialized Angular2TokenService offers methods for session management.

.signIn()

The signIn method is used to sign in the user with email address and password. The optional parameter type specifies the name of UserType used for this session.

signIn({email: string, password: string, userType?: string}): Observable<Response>

Example:

this._tokenService.signIn({
    email:    '[email protected]',
    password: 'secretPassword'
}).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.signOut()

The signOut method destroys session and session storage.

signOut(): Observable<Response>

Example:

this._tokenService.signOut().subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.registerAccount()

Sends a new user registration request to the Server.

registerAccount({email: string, password: string, passwordConfirmation: string, userType?: string}): Observable<Response>

Example:

this._tokenService.registerAccount({
    email:                '[email protected]',
    password:             'secretPassword',
    passwordConfirmation: 'secretPassword'
}).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.deleteAccount()

Deletes the account for the signed in user.

deleteAccount(): Observable<Response>

Example:

this._tokenService.deleteAccount().subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.validateToken()

Validates the current token with the server.

validateToken(): Observable<Response>

Example:

this._tokenService.validateToken().subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.updatePassword()

Updates the password for the logged in user. updatePassword({password: string, passwordConfirmation: string, passwordCurrent: string, userType?: string, resetPasswordToken?: string}): Observable<Response>

Example:

this._tokenService.updatePassword({
    password:             'newPassword',
    passwordConfirmation: 'newPassword',
    passwordCurrent:      'oldPassword',
    resetPasswordToken:   'resetPasswordToken',
}).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.resetPassword()

Request a password reset from the server.

resetPassword({email: string, userType?: string}): Observable<Response>

Example:

this._tokenService.resetPassword({
    email: '[email protected]',
}).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.signInOAuth()

Initiates OAuth authentication flow. Currently, it supports two window modes: newWindow (default) and sameWindow (settable in config as oAuthWindowType).

• When oAuthWindowType is set to newWindow, .signInOAuth() opens a new window and returns an observable.

• When oAuthWindowType is set to sameWindow, .signInOAuth() returns nothing and redirects user to auth provider. After successful authentication, it redirects back to oAuthCallbackPath. Application router needs to intercept this route and call processOAuthCallback() to fetch AuthData from params.

signInOAuth(oAuthType: string)

Example:

this._tokenService.signInOAuth(
'github'
).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

.processOAuthCallback()

Fetches AuthData from params sent via OAuth redirection in sameWindow flow.

processOAuthCallback()

Example

Callback route:

RouterModule.forRoot([
  { path: 'oauth_callback', component: OauthCallbackComponent }
])

Callback component:

@Component({
  template: ''
})
export class OauthCallbackComponent implements OnInit {
  constructor(private _tokenService: Angular2TokenService) {}

  ngOnInit() {
    this._tokenService.processOAuthCallback();
  }
}

HTTP Service Wrapper

Angular2TokenService wraps all standard Angular2 Http Service calls for authentication and token processing. If apiPath is configured it gets added in front of path.

• get(url: string, options?: RequestOptionsArgs): Observable<Response>
• post(url: string, body: any, options?: RequestOptionsArgs): Observable<Response>
• put(url: string, body: any, options?: RequestOptionsArgs): Observable<Response>
• delete(url: string, options?: RequestOptionsArgs): Observable<Response>
• patch(url: string, body: any, options?: RequestOptionsArgs): Observable<Response>
• head(url: string, options?: RequestOptionsArgs): Observable<Response>
• options(url: string, options?: RequestOptionsArgs): Observable<Response>

Example:

this._tokenService.get('my-resource/1').map(res => res.json()).subscribe(
    res =>      console.log(res),
    error =>    console.log(error)
);

Multiple User Types

An array of UserType can be passed in Angular2TokenOptions during init(). The user type is selected during sign in and persists until sign out. .currentUserType returns the currently logged in user.

Example:

this._tokenService.init({
    userTypes: [
        { name: 'ADMIN', path: 'admin' },
        { name: 'USER', path: 'user' }
    ]
});

this._tokenService.signIn({
    email:    '[email protected]',
    password: 'secretPassword',
    userType: 'ADMIN'
})

this._tokenService.currentUserType; // ADMIN

Route Guards

Angular2-Token implements the CanActivate interface, so it can directly be used as a route guard. If the signInRedirect option is set the user will be redirected on a failed (=false) CanActivate using Router.navigate(). It currently does not distinguish between user types.

Example:

const routerConfig: Routes = [
    {
        path: '',
        component: PublicComponent
    }, {
        path: 'restricted',
        component: RestrictedComponent,
        canActivate: [Angular2TokenService]
    }
];

Advanced Usage

More advanced methods can be used if a higher degree of customization is required.

.request()

More customized requests can be send with the .request()-function. It accepts the RequestOptionsArgs-Interface. More information can be found in the Angular2 API Reference here.

request(options: RequestOptionsArgs): Observable<Response>

Example:

this._tokenService.request({
    method: RequestMethod.Post,
    url:    'my-resource/1',
    data:   mydata
});

.userSignedIn()

Returns true if a user is signed in. It does not distinguish between user types.

userSignedIn(): boolean

.currentUserType

Returns current user type as string like specified in the options.

get currentUserType(): string

.currentUserData

Returns current user data as returned by devise token auth. This variable is null after page reload until the .validateToken() call is answerd by the backend.

get currentUserData(): UserData

.currentAuthData

Returns current authentication data which are used to set auth headers.

get currentAuthData(): AuthData

.currentAuthHeaders

Returns current authentication data as an HTTP ready Header object.

get currentAuthHeaders(): Header

Redirect original requested URL

If you want to redirect to the protected URL after signing in, you need to set signInStoredUrlStorageKey and in your code you can do something like this

this._tokenService.signIn({
    email:    '[email protected]',
    password: 'secretPassword'
}).subscribe(
    res => {
        // You have to add Router DI in your component
        this.router.navigateByUrl(localStorage.getItem('redirectTo'));
    },
    error =>    console.log(error)
);

Common Problems

CORS Configuration

If you are using CORS in your Rails API make sure that Access-Control-Expose-Headers includes access-token, expiry, token-type, uid, and client. For the rack-cors gem this can be done by adding the following to its config. More information can be found here. ruby :expose => ['access-token', 'expiry', 'token-type', 'uid', 'client']

Missing Routes

Make sure that your projects includes some kind of routing.

Development

If the package is installed from Github specified in the package.json, you need to build the package locally.

cd ./node_modules/angular2-token
npm install
npm run build

Testing

npm test

Credits

Test config files based on Angular2 Webpack Starter by AngularClass

License

The MIT License (see the LICENSE file for the full text)