homebridge-mi-humidifier-eve

A Xiaomi Mi humidifier plugin for Homebridge with Eve app temp/humidity monitoring.

Configuration

Add the following part to the "platforms" section of your Homebridge config:

{
  "platform": "MiHumidifierEve",
  "devices": [
    {
      "name": "Humidifier",
      "address": "<ip>",
      "token": "<token>",
      "model": "zhimi.humidifier.v1",
      "updateInterval": 30,
      "disabled": false,
      "autoSwitchToHumidityMode": true,
      "disableTargetHumidity": false,
      "globalsDataPath": "Mi/Humidifier",
      "ledBulb": {
        "enabled": true,
        "name": "Humidifier LED"
      },
      "buzzerSwitch": {
        "enabled": true,
        "name": "Humidifier Buzzer"
      },
      "temperatureSensor": {
        "enabled": true,
        "name": "Humidifier Temperature"
      },
      "humiditySensor": {
        "enabled": true,
        "name": "Humidifier Humidity"
      }
    }
  ]
}

Platform

| Key | Description | | -------- | ------------------------------------------- | | platform | Platform name. Has to be MiHumidifierEve | | devices | Array of devices configurations. |

Device

| Key | Description | Default value | | ------------------------- | ------------------------------------------------------------ | ------------------------ | | name | Name of the device. This will appear in your Home app. | "Humidifier" | | address | IP address of the device. | — | | token | Device token. See obtaining token. | — | | model | One of:- zhimi.humidifier.v1- zhimi.humidifier.ca1- zhimi.humidifier.cb1- zhimi.humidifier.ca4- deerma.humidifier.mjjsq- deerma.humidifier.jsq001- deerma.humidifier.jsq1- shuii.humidifier.jsq001See supported devices section for more details. | — | | updateInterval | Device values update interval in seconds. This value affects how often data (humidity, temperature, etc.) from the device is updated. | 30 | | disabled | Disable the devices. Can be used to temporary hide the device when it is not required without removing it from config. | false | | autoSwitchToHumidityMode | Automatically switches mode to "humidity" when target humidity is changed. Affects models: - zhimi.humidifier.{ca1,cb1,ca4} - deerma.humidifier.{mjjsq,jsq1,jsq001,jsq4} | false | | disableTargetHumidity | Disables ability to control target humidity. In this case long press on device in Home.app will allow to control fan speed instead of target humidity. | false | | ledBulb.enabled | Enables additional light bulb accessory which allows to control LED lights. | false | | ledBulb.name | Name of LED lightbulb. This will appear in your Home app. | "Humidifier LED" | | buzzerSwitch.enabled | Enables additional switch accessory which allows to control buzzer. | false | | buzzerSwitch.name | Name of buzzer switch. This will appear in your Home app. | "Humidifier Buzzer" | | temperatureSensor.enabled | Enables additional temperature sensor accessory. | false | | temperatureSensor.name | Name of temperature sensor. This will appear in your Home app. | "Humidifier Temperature" | | humiditySensor.enabled | Enables additional humidity sensor accessory. | false | | humiditySensor.name | Name of humidity sensor. This will appear in your Home app. | "Humidifier Humidity" | | cleanModeSwitch.enabled | Enables additional switch accessory which allows to control clean mode (only for zhimi.humidifier.ca4). | false | | cleanModeSwitch.name | Name of clean mode switch. This will appear in your Home app. | "Humidifier Clean Mode" |

Supported devices

Smartmi Humidifier

Model: zhimi.humidifier.v1

Model №: CJJSQ01ZM

Smartmi Evaporative Humidifier

Model: zhimi.humidifier.ca1 / zhimi.humidifier.cb1

Model №: CJXJSQ02ZM, SKV6001EU

Smartmi Evaporative Humidifier 2

Model: zhimi.humidifier.ca4

Model №: CJXJSQ04ZM

Zero Fog Humidifier

Model: shuii.humidifier.jsq001

Model №: DWZF(G)-2100Z

Mijia Smart Sterilization Humidifier (S)

Model: deerma.humidifier.mjjsq / deerma.humidifier.jsq001

Model №: SCK0A45, ZNJSQ01DEM, MJJSQ03DY

Mijia Pure Smart Humidifier

Model: deerma.humidifier.jsq4

Model №: CJSJSQ01DY