Commitizen for contributors

When you commit with Commitizen, you'll be prompted to fill out any required commit fields at commit time. No more waiting until later for a git commit hook to run and reject your commit (though that can still be helpful). No more digging through CONTRIBUTING.md to find what the preferred format is. Get instant feedback on your commit message formatting and be prompted for required fields.

Installing the command line tool

Installation is as simple as running the following command (add sudo if on OSX/Linux):

npm install -g commitizen

Using the command line tool

Now, simply use git cz instead of git commit when committing.

When you're working in a Commitizen friendly repository, you'll be prompted to fill in any required fields and your commit messages will be formatted according to the standards defined by project maintainers.

If you're not working in a Commitizen friendly repository, then git cz will work just the same as git commit.

Conventional commit messages as a global utility

Install commitizen globally, if you have not already.

npm install -g commitizen

Install your preferred commitizen adapter globally, for example cz-conventional-changelog

npm i -g cz-conventional-changelog

Create a .czrc file in your home directory, with path referring to the preferred, globally installed, commitizen adapter

echo '{ "path": "cz-conventional-changelog" }' > ~/.czrc

You are all set! Now cdinto any git repository and use git cz instead of git commit and you will find the commitizen prompt.

Protip: You can use all the git commit options with git cz, for example: git cz -a.

If your repository is a nodejs project, making it Commitizen-friendly is super easy.

If your repository is already Commitizen-friendly, the local commitizen adapter will be used, instead of globally installed one.

Commitizen for project maintainers

As a project maintainer, making your repo Commitizen friendly allows you to select pre-existing commit message conventions or to create your own custom commit message convention. When a contributor to your repo uses Commitizen, they will be prompted for the correct fields at commit time.

Making your repo Commitizen-friendly

For this example, we'll be setting up our repo to use AngularJS's commit message convention also known as conventional-changelog.

First, install the Commitizen cli tools:

npm install commitizen -g

Next, initialize your project to use the cz-conventional-changelog adapter by typing:

commitizen init cz-conventional-changelog --save-dev --save-exact

Note that if you want to force install over the top of an old adapter, you can apply the --force argument. For more information on this, just run commitizen help.

The above command does three things for you. It installs the cz-conventional-changelog adapter npm module, it saves it to the package.json's dependencies or devDependencies, and lastly it add the config.commitizen key to the root of your package.json as shown here:

...
  "config": {
    "commitizen": {
      "path": "cz-conventional-changelog"
    }
  }

This just tells Commitizen which adapter we actually want our contributors to use when they try to commit to this repo.

commitizen.path is resolved via require.resolve and supports

• npm modules
• directories relative to process.cwd() containing an index.js file
• file base names relative to process.cwd() with js extension
• full relative file names
• absolute paths.

Please note that in previous version of Commitizen we used czConfig. czConfig has been deprecated and you should migrate to the new format before Commitizen 3.0.0.

Congratulations your repo is Commitizen-friendly. Time to flaunt it!

Add the Commitizen-friendly badge to your README using the following markdown:

[![Commitizen friendly](https://img.shields.io/badge/commitizen-friendly-brightgreen.svg)](http://commitizen.github.io/cz-cli/)

Your badge will look like this:

It may also make sense to change your README.md or CONTRIBUTING.md to include or link to the Commitizen project so that your new contributors may learn more about installing and using Commitizen.

Go further

Commitizen is great on its own, but it shines when you use it with some other amazing open source tools. Kent C. Dodds shows you how to accomplish this in his Egghead.io series, How to write an open source javascript library. Many of the concepts can be applied to non-javascript projects as well.

Retrying failed commits

As of version 2.7.1, you may attempt to retry the last commit using the git cz --retry command. This can be helpful when you have tests set up to run via a git precommit hook. In this scenario, you may have attempted a Commitizen commit, painstakingly filled out all of the commitizen fields, but your tests fail. In previous Commitizen versions, after fixing your tests, you would be forced to fill out all of the fields again. Enter the retry command. Commitizen will retry the last commit that you attempted in this repo without you needing to fill out the fields again.

Please note that the retry cache may be cleared when upgrading commitizen versions, upgrading adapters, or if you delete the commitizen.json file in your home or temp directory. Additionally, the commit cache uses the filesystem path of the repo, so if you move a repo or change its path, you will not be able to retry a commit. This is an edge case, but might be confusing if you have scenarios where you are moving folders that contain repos.

It is important to note that if you are running git-cz from a npm script (let's say it is called commit) you will need to do one of the following:

• Pass -- --retry as an argument for your script. i.e: npm run commit -- --retry
• Use npm-run to find and call git-cz executable directly. i.e: npm-run git-cz --retry
• Use npm-quick-run i.e: nr commit --retry or just nr c --retry (which will run all scripts that starts with the letter 'c')

Note that the last two options do not require you to pass -- before the args but the first does.

Commitizen for multi-repo projects

As a project maintainer of many projects, you may want to standardize on a single commit message format for all of them. You can create your own node module which acts as front-end for commitizen.

1. Create your own entry point script

// my-cli.js

#!/usr/bin/env node
"use strict";

const path = require('path');
const bootstrap = require('commitizen/dist/cli/git-cz').bootstrap;

bootstrap({
  cliPath: path.join(__dirname, '../node_modules/commitizen'),
  // this is new
  config: {
    "path": "cz-conventional-changelog"
  }
});

2. Add script to package.json

// package.json

{
  "name": "company-commit",
  "bin": "./my-cli.js"
  "dependencies": {
    "commitizen": "^2.7.6",
    "cz-conventional-changelog": "^1.1.5",
  }
}

3. Publish it to npm and use it!

npm install company-commit --save-dev
./node_modules/.bin/company-commit

Adapters

We know that every project and build process has different requirements so we've tried to keep Commitizen open for extension. You can do this by choosing from any of the pre-build adapters or even by building your own. Here are some of the great adapters available to you:

• cz-conventional-changelog
• cz-jira-smart-commit
• rb-conventional-changelog
• cz-mapbox-changelog
• cz-customizable

To create an adapter, just fork one of these great adapters and modify it to suit your needs. We pass you an instance of Inquirer.js but you can capture input using whatever means necessary. Just call the commit callback with a string and we'll be happy. Publish it to npm, and you'll be all set!

Philosophy

About Commitizen

Commitizen is an open source project that helps contributors be good open source citizens. It accomplishes this by prompting them to follow commit message conventions at commit time. It also empowers project maintainers to create or use predefined commit message conventions in their repos to better communicate their expectations to potential contributors.

Commitizen or Commit Hooks

Both! Commitizen is not meant to be a replacement for git commit hooks. Rather, it is meant to work side-by-side with them to ensure a consistent and positive experience for your contributors. Commitizen treats the commit command as a declarative action. The contributor is declaring that they wish to contribute to your project. It is up to you as the maintainer to define what rules they should be following.

We accomplish this by letting you define which adapter you'd like to use in your project. Adapters just allow multiple projects to share the same commit message conventions. A good example of an adapter is the cz-conventional-changlog adapter.

Authors and Contributors

@JimTheDev (Jim Cummins, author) @kentcdodds @accraze @kytwb @Den-dp

Special thanks to @stevelacy, whose gulp-git project makes commitizen possible.