@hint/hint-highest-available-document-mode
v5.0.23
Published
hint for best practices related to usage of the X-UA-Compatible meta tag and response header
Downloads
106,052
Readme
Highest document mode (highest-available-document-mode
)
highest-available-document-mode
warns against not informing browsers
that support document modes to use the highest one available.
Why is this important?
Internet Explorer 8/9/10 support document compatibility modes. Because of this, even if the site’s visitor is using, let’s say, Internet Explorer 9, it’s possible that Internet Explorer will not use the latest rendering engine, and instead, decide to render your page using the Internet Explorer 5.5 rendering engine.
Serving the page with the following HTTP response header:
X-UA-Compatible: ie=edge
or specifying the x-ua-compatible
meta tag:
<meta http-equiv="x-ua-compatible" content="ie=edge">
will force Internet Explorer 8/9/10 to render the page in the highest available mode in the various cases when it may not, and therefore, ensure that anyone browsing the site from those browsers will get the best possible user experience that browser can offer.
Of the two methods, sending the HTTP response header instead of using
the meta
tag is recommended, as the latter will not always work
(e.g.: if the site is served on a non-standard port, as Internet
Explorer’s preference option Display intranet sites in Compatibility
View
is checked by default).
Notes:
If the
meta
is used, it should to be included in the<head>
before all other tags except for the<title>
and the other<meta>
tags.Appending
chrome=1
to the value of the HTTP response header or the meta tag is not recommended asChrome Frame
has been deprecated for quite some time.
What does the hint check?
By default, the hint checks if the X-UA-Compatible
response header
is sent with the value of IE=edge
, and that the meta
tag isn’t
used.
Examples that trigger the hint for defaults
X-UA-Compatible
response header is not sent:
HTTP/... 200 OK
...
X-UA-Compatible
response header is sent with a value different
than ie=edge
:
HTTP/... 200 OK
...
X-UA-Compatible: IE=7
HTTP/... 200 OK
...
X-UA-Compatible: ie=edge,chrome=1
X-UA-Compatible
response header is sent, but the meta
tag is
also specified:
HTTP/... 200 OK
...
X-UA-Compatible: ie=edge
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="x-ua-compatible" content="ie=edge">
<title>example</title>
...
</head>
<body>...</body>
</html>
Examples that pass the hint for defaults
HTTP/... 200 OK
...
X-UA-Compatible: ie=edge
The hint can be configured to require
the X-UA-Compatible
meta tag. This option is indicated mainly for
the case when the HTTP response header cannot be set.
Examples that trigger the hint
X-UA-Compatible
meta tag is not specified:
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>example</title>
...
</head>
<body>...</body>
</html>
X-UA-Compatible
meta tag is specified with a value different than
ie=edge
:
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="x-ua-compatible" content="ie=9">
<title>example</title>
...
</head>
<body>...</body>
</html>
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="x-ua-compatible" content="ie=edge,chrome=1">
<title>example</title>
...
</head>
<body>...</body>
</html>
X-UA-Compatible
meta tag is specified in the <body>
:
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>example</title>
...
</head>
<body>
...
<meta http-equiv="x-ua-compatible" content="ie=edge">
...
</body>
</html>
X-UA-Compatible
meta tag is specified in the <head>
, but it’s
not included before all other tags except for the <title>
and the
other <meta>
tags:
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>example</title>
<script src="example.js"></script>
<meta http-equiv="x-ua-compatible" content="ie=9">
...
</head>
<body>...</body>
</html>
Examples that pass the hint
HTTP/... 200 OK
...
X-UA-Compatible: ie=edge
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>example</title>
<meta http-equiv="x-ua-compatible" content="ie=edge">
<script src="example.js"></script>
...
</head>
<body>...</body>
</html>
How to configure the server to pass this hint
Apache can be configured to add or remove the X-UA-Compatible
header using the Header
directive.
Adding the X-UA-Compatible
header on Apache
<IfModule mod_headers.c>
# Because `mod_headers` cannot match based on the content-type,
# and the `X-UA-Compatible` response header should only be sent
# for HTML documents and not for the other resources, the following
# workaround needs to be done.
# 1) Add the header to all resources.
Header set X-UA-Compatible "IE=edge"
# 2) Remove the header for all resources that should not have it.
<FilesMatch "\.(appcache|atom|bbaw|bmp|crx|css|cur|eot|f4[abpv]|flv|geojson|gif|htc|ic[os]|jpe?g|m?js|json(ld)?|m4[av]|manifest|map|markdown|md|mp4|oex|og[agv]|opus|otf|pdf|png|rdf|rss|safariextz|svgz?|swf|topojson|tt[cf]|txt|vcard|vcf|vtt|webapp|web[mp]|webmanifest|woff2?|xloc|xml|xpi)$">
Header unset X-UA-Compatible
</FilesMatch>
</IfModule>
Removing the X-UA-Compatible
header on Apache
If the header is sent, in most cases, to make Apache stop sending
the X-UA-Compatible
requires removing the configuration that adds
it (i.e.: something such as Header set X-UA-Compatible "IE=edge"
).
However, if the header is added from somewhere in the stack (e.g.
the framework level, language level such as PHP, etc.), and that
cannot be changed, you can try to remove it at the Apache
level,
using the following:
<IfModule mod_headers.c>
Header unset X-UA-Compatible
</IfModule>
Note that:
The above snippets work with Apache
v2.2.0+
, but you need to havemod_headers
enabled in order for them to take effect.If you have access to the main Apache configuration file (usually called
httpd.conf
), you should add the logic in, for example, a<Directory>
section in that file. This is usually the recommended way as using.htaccess
files slows down Apache!If you don't have access to the main configuration file (quite common with hosting services), add the snippets in a
.htaccess
file in the root of the web site/app.
For the complete set of configurations, not just for this rule, see the Apache server configuration related documentation.
Adding the X-UA-Compatible
header on IIS
To add the X-UA-Compatible
header you can use a URL rewrite
rule rule that matches the text/html
content-type
header of a response and adds it:
<configuration>
<system.webServer>
<rewrite>
<outboundRules>
<rule name="X-UA-Compatible header">
<match serverVariable="RESPONSE_X_UA_Compatible" pattern=".*" />
<conditions>
<add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
</conditions>
<action type="Rewrite" value="IE=edge"/>
</rule>
</outboundRules>
</rewrite>
</system.webServer>
</configuration>
Note that if your site uses a mime type different than text/html
(e.g.: application/xhtml+xml
) to serve HTML content, you'll have
to update the value of pattern
.
Removing the X-UA-Compatible
header on IIS
If the header is set by IIS using the above technique, removing the code should be enough to stop sending it.
If the header is set at the application level you can use the following:
<configuration>
<system.webServer>
<httpProtocol>
<customHeaders>
<remove name="X-UA-Compatible"/>
</customHeaders>
</httpProtocol>
</system.webServer>
</configuration>
Note that:
- The above snippet works with IIS 7+.
- You should use the above snippet in the
web.config
of your application.
For the complete set of configurations, not just for this rule, see the IIS server configuration related documentation.
Can the hint be configured?
requireMetaElement
can be set to true
to allow and require the use of
meta
tag.
In the .hintrc
file:
{
"connector": {...},
"formatters": [...],
"hints": {
"highest-available-document-mode": [ "warning", {
"requireMetaElement": true
}],
...
},
...
}
Also, note that this hint takes into consideration the targeted
browsers, and if Internet Explorer 8/9/10 aren’t
among them, it will suggest removing the meta
tag and/or not sending
the HTTP response header.
How to use this hint?
This package is installed automatically by webhint:
npm install hint --save-dev
To use it, activate it via the .hintrc
configuration file:
{
"connector": {...},
"formatters": [...],
"hints": {
"highest-available-document-mode": "error",
...
},
"parsers": [...],
...
}
Note: The recommended way of running webhint is as a devDependency
of
your project.