@hanasis/escpos

v3.0.0-alpha.6s

Published

5 months ago

ESC/POS Printer driver for nodejs

Downloads

0High
0Medium
0Low

hanasis

escpos printer

Notice

This project is modifying and adding features based on https://www.npmjs.com/package/escpos 3.0.0-alpha.6

ESCPOS

ESC/POS Printer driver for node

Installation

npm

$ npm i @hanasis/escpos --save

yarn

$ yarn add @hanasis/escpos

if you use usb as an adapter :

On Linux, you'll need libudev to build libusb.
On Ubuntu/Debian: sudo apt-get install build-essential libudev-dev.
On Windows, Use Zadig to install the WinUSB driver for your USB device.

Otherwise you will get LIBUSB_ERROR_NOT_SUPPORTED when attempting to open devices.

Example

const escpos = require('@hanasis/escpos');
// install escpos-usb adapter module manually
escpos.USB = require('escpos-usb');
// Select the adapter based on your printer type
const device  = new escpos.USB();
// const device  = new escpos.Network('localhost');
// const device  = new escpos.Serial('/dev/usb/lp0');

const options = { encoding: "GB18030" /* default */ }
// encoding is optional

const printer = new escpos.Printer(device, options);

device.open(function(error){
  printer
  .font('a')
  .align('ct')
  .style('bu')
  .size(1, 1)
  .text('The quick brown fox jumps over the lazy dog')
  .text('敏捷的棕色狐狸跳过懒狗')
  .barcode('1234567', 'EAN8')
  .table(["One", "Two", "Three"])
  .tableCustom(
    [
      { text:"Left", align:"LEFT", width:0.33, style: 'B' },
      { text:"Center", align:"CENTER", width:0.33},
      { text:"Right", align:"RIGHT", width:0.33 }
    ],
    { encoding: 'cp857', size: [1, 1] } // Optional
  )
  .qrimage('https://github.com/song940/node-escpos', function(err){
    this.cut();
    this.close();
  });
});

See ./examples for more examples.

Printer

Constructors

Printer(device)

const usbDevice = new escpos.USB();
const usbPrinter = new escpos.Printer(usbDevice);

const serialDevice = new escpos.Serial('/dev/usb/lp0');
const serialPrinter = new escpos.Printer(serialDevice);

const bluetoothDevice = new escpos.Bluetooth('01:23:45:67:89:AB', 1);
const bluetoothPrinter = new escpos.Printer(bluetoothDevice);

const networkDevice = new escpos.Network('localhost');
const networkPrinter = new escpos.Printer(networkDevice);

Methods

Escpos inherits its methods to the printers. the following methods are defined:

text("text", encodeType)

Prints raw text. Raises TextError exception.

For the encode type, see the iconv-lite wiki document. Escpos uses iconv-lite for encoding.

If the type is undefined, the default type is GB18030.

async image(imagePath, "density")

Prints an image at a set density.

Density consists of a character signaling the base density setting, s for single, d for double, followed by an integer for image sampling - 8 (8-bit) or 24.

printer.align('ct')
       .image(image, 's8')
       .then(() => { 
          printer.cut()
                 .close(); 
       });

encode("encodeType")

Sets the encoding value globally. default type is GB18030 (Chinese)

printer
.encode('EUC-KR')
.text('동해물과 백두산이 마르고 닳도록');

control("align")

Carrier feed and tabs.

align is a string which takes any of the following values:

LF for Line Feed
FF for Form Feed
CR for Carriage Return
HT for Horizontal Tab
VT for Vertical Tab

align("align")

Set text properties.

align set horizontal position for text, the possible values are:

CT is the Center alignment
LT is the Left alignment
RT is the Right alignment

Default: LT

font("type")

font type could be A or B. Default: A

size(width, heigth)

width is a numeric value, 1 is for regular size, and 2 is twice the standard size. Default: 1

height is a numeric value, 1 is for regular size and 2 is twice the standard size. Default: 1

barcode("code", "barcodeType", "options")

Prints a barcode.

"code" is an alphanumeric code to be printed as bar code "barcodeType" must be one of the following type of codes:

UPC-A
UPC-E
EAN13
EAN8
CODE39
ITF
NW7

The EAN type automatically calculates the last parity bit. For the EAN13 type, the length of the string is limited to 12, and EAN8 is limited to 7. (#57) If you wish to disable the parity bit you must set "includeParity": false in the options provided to the command.

"options"

"options.width" (default=1) is a numeric value ranging between 1 up to 5.
"options.height" (default=100) is a numeric value ranging between 1 up to 255.
"options.includeParity" (default=true) When true parity bit is calculated for EAN13/EAN8 bar code
"options.position" (default=BLW) where to place the barcode numeric value: OFF|ABV|BLW|BTH
- ABV = ABOVE
- BLW = BELOW
- BTH = BOTH
- OFF = OFF
"options.font" (default=A) the font size: A|B

Raises BarcodeTypeError, BarcodeSizeError, BarcodeCodeError exceptions.

For backward compatibility the old method interface is still supported:

barcode("code", "barcodeType", width, height, "position", "font")

cut("mode")

Cut paper.

mode set a full or partial cut. Default: full Partial cut is not implemented in all printers.

*** Don't foget this, because cut will flush buffer to printer ***

cashdraw(pin)

Sends a pulse to the cash drawer in the specified pin.

pin is a numeric value which defines the pin to be used to send the pulse, it could be 2 or 5. Raises `CashDrawerError()``

beep(n,t)

Printer Buzzer (Beep sound).

"n" Refers to the number of buzzer times. "t" Refers to the buzzer sound length in (t * 100) milliseconds.

Screencast

Contributing

Fork this repo
Clone your repo
Install dependencies
Checkout a feature branch
Feel free to add your features
Make sure your features are fully tested
Open a pull request, and enjoy <3

Contributors

Thanks to our contributors 🎉👏

MIT license

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.