@evenius/semantic-release-backmerge
v3.2.4
Published
semantic-release plugin to back-merge a release into a develop branch
Downloads
8
Maintainers
Readme
@saithodev/semantic-release-backmerge
semantic-release plugin to back-merge a release in the project's git repository.
Note: semantic-release in its core is not intended to be used with Git Flow where a stable (master
/main
) branch and a unstable branch (develop
/next
) exist. This plugin enables to use semantic-release with such branches, however it does NOT guarantee using semantic-release with Git Flow.
Especially automatic hotfix releases may not be possible as those usually lead to merge conflicts with develop that have to be resolved manually. In such cases the release workflow will fail, causing a red pipeline!
| Step | Description |
|--------------------|------------------------------------------------------------------------------------------------------------|
| verifyConditions
| Verify the access to the remote Git repository, the 'backmergeBranches' option configuration. |
| done
| Create a back-merge into the configured branch if the release is successful. |
Install
$ npm install @saithodev/semantic-release-backmerge -D
Usage
The plugin can be configured in the semantic-release configuration file:
Note: As this plugin will rebase your "develop" branch onto your "master" branch, you may not have any unstaged files in your workspace. If you do, you may set the clearWorkspace option to stash them and restore them with restoreWorkspace if needed.
{
"plugins": [
"@semantic-release/commit-analyzer",
"@semantic-release/release-notes-generator",
[
"@saithodev/semantic-release-backmerge",
{
"backmergeBranches": ["dev"],
"plugins": [
[
"@semantic-release/exec",
{
"successCmd": "echo 'Version in master is ${nextRelease.version}' > test.txt && git add test.txt"
}
]
]
}
]
]
}
Jenkins
If you're using Jenkins, you may need to set the username and password for Git as below (see #12):
withCredentials([usernamePassword(credentialsId: JENKINS_GIT_CREDENTIALS_ID, passwordVariable: 'GIT_PASSWORD', usernameVariable: 'GIT_USERNAME')]) {
sh("git config credential.username ${GIT_USERNAME}")
sh("git config credential.helper '!f() { echo password=$GIT_PASSWORD; }; f'")
}
withCredentials([usernameColonPassword(credentialsId: JENKINS_GIT_CREDENTIALS_ID, variable: 'GIT_CREDENTIALS')]) {
nodejs(JENKINS_NODE_JS_INSTALLATION_LABEL) {
sh("npx semantic-release")
}
}
Backmerging into protected branches
You can backmerge into protected branches if repository admins/owners are allowed to do that.
Make sure to provide an admin/owner's access token or credentials (e.g. via GITHUB_TOKEN
).
For GitHub Actions you also need to disable persist-credentials
in the checkout action:
- uses: actions/checkout@v2
with:
persist-credentials: false
The personal access token in GITHUB_TOKEN
needs access to the repo
scope.
Configuration
Options
| Options | Description | Default |
|-----------|---------------------------------------------------------------------------------|-----------|
| backmergeBranches
| The branches where the release is merged into. See backmergeBranches. | ['develop'] |
| backmergeStrategy
| How to perform the backmerge. See backmergeStrategy. | rebase |
| plugins
| Plugins defined here may stage files to be included in a back-merge commit. See plugins. | [] |
| message
| The message for the back-merge commit (if files were changed by plugins. See message. | chore(release): Preparations for next release [skip ci]
|
| forcePush
| If set the back-merge will be force-pushed. See forcePush. | false |
| clearWorkspace
| Whether to stash the current workspace before backmerge. See clearWorkspace. | false |
| restoreWorkspace
| Restore the stashed workspace after backmerge completed. See restoreWorkspace. | false |
| mergeMode
| Mode for merging (when backmergeStrategy=merge
). See mergeMode. | none |
| fastForwardMode
| Fast forwarding option for merging (when backmergeStrategy=merge
). See fastForwardMode. | none |
backmergeBranches
Branch names that should receive the back-merge. If none is given, the default value is used.
This argument takes a list of branch name strings or objects. A branch object looks like this:
{from: "master", to: "dev"}
In this example, a release from master
branch is merged into dev
branch. With that you can perform conditional backmerges,
i.e. backmerges that only occur when merged from a certain branch.
Here is an example where all releases will backmerge into develop
and releases from next
branch will be backmerged into staging
as well.
{
"plugins": [
"@semantic-release/commit-analyzer",
"@semantic-release/release-notes-generator",
[
"@saithodev/semantic-release-backmerge",
{
"backmergeBranches": ["develop", {"from": "next", "to": "staging"}]
}
]
]
}
You may use Lodash template variables in branch name strings. The following variables are available:
| Parameter | Description |
|---------------------|-----------------------------------------------------------------------------------------------------------------------------------------|
| branch
| The branch from which the release is done. |
| branch.name
| The branch name. |
| branch.type
| The type of branch. |
| branch.channel
| The distribution channel on which to publish releases from this branch. |
| branch.range
| The range of semantic versions to support on this branch. |
| branch.prerelease
| The prerelease detonation to append to semantic versions released from this branch. |
plugins
Use this if you have to make changes to the files for your development branch (e.g. setting a -dev version). It uses the same plugin structure as semantic-release, but only trigger the "success" step after rebase from develop onto master is done and just before it is pushed.
Note: Please make sure that the files you changed are staged to Git workspace. Only then they will be committed.
message
The message for the back-merge commit is generated with Lodash template. The following variables are available:
| Parameter | Description |
|---------------------|----------------------------------------------------------------------------------------------------------------------------------------|
| branch
| The branch from which the release is done. |
| branch.name
| The branch name. |
| branch.type
| The type of branch. |
| branch.channel
| The distribution channel on which to publish releases from this branch. |
| branch.range
| The range of semantic versions to support on this branch. |
| branch.prerelease
| The prerelease detonation to append to semantic versions released from this branch. |
| lastRelease
| Object
with version
, gitTag
and gitHead
of the last release. |
| nextRelease
| Object
with version
, gitTag
, gitHead
and notes
of the release being done. |
allowSameBranchMerge
If you want to be able to back-merge into the same branch as the branch that was being released from, enable this setting.
Note: It is recommended to include [skip ci]
in the commit message to not trigger a new build. Some CI service support the [skip ci]
keyword only in the subject of the message.
forcePush
Setting this option will force-push the commits from back-merge onto the develop branch.
Warning: This will override commits that are not in the develop branch, so make sure that really is what you want!
clearWorkspace
Setting this option will stash all uncommitted changes from Git workspace before attempting rebase.
restoreWorkspace
Setting this option will restore the stashed changes after the backmerge completed.
backmergeStrategy
This setting will determine whether the develop branch should be rebased onto master or master should be merged into develop. Allowed values: rebase (default), merge
mergeMode
This setting will be used to determine how merge conflicts are resolved when using the merge
backmerge strategy.
Allowed values: none (default), ours, theirs
none = no merge conflict resolve (process will abort on merge conflicts!)
ours = apply changes from develop branch
theirs = apply changes from master branch
fastForwardMode
This setting will be used to determine the fast forwarding strategy when using the merge
backmerge strategy.
Allowed values: none (default), ff, no-ff, ff-only
none = default setting which is the same as ff.
ff = when possible resolve the merge as a fast-forward (only update the branch pointer to match the merged branch; do not create a merge commit). When not possible (when the merged-in history is not a descendant of the current history), create a merge commit.
no-ff = create a merge commit in all cases, even when the merge could instead be resolved as a fast-forward.
ff-only = resolve the merge as a fast-forward when possible. When not possible, refuse to merge and exit with a non-zero status.