@eove/flow-analyzer-com-talk
v3.0.3
Published
CLI to talk to flow analyzers (pf300, citrex)
Downloads
71
Readme
flow-analyzer-com-talk
CLI to talk to flow analyzers (pf300, citrex, ...)
Install
Pre requisites
MacOS
brew install zmq
git clone [email protected]:eove/flow-analyzer-com.git
cd flow-analyzer-com/packages/flow-analyzer-com-talk
npm install -g node-gyp
npm install -g
Linux, Raspberry
sudo apt-get install -y libglib2.0-dev libzmq3-dev
git clone [email protected]:eove/flow-analyzer-com.git
cd flow-analyzer-com/packages/flow-analyzer-com-talk
npm install -g node-gyp
npm install -g
Usage
✋ Read this first!
To know which USB ports are available on your machine: flowAnalyzerTalk list-ports
. May return something like:
/dev/tty.Bluetooth-Incoming-Port
/dev/tty.usbserial-FTZ8FGPX
Then, just run for example: flowAnalyzerTalk com -p /dev/tty.usbserial-FTZ8FGPX -d
- To display debug messages, use the
-d
option - You will need to pass a port name with the
-p
option.
Shell
You can interact with the running flowAnalyzerTalk com
process to make it send commands.
Start the interactive shell in another terminal with: flowAnalyzerTalk shell
while flowAnalyzerTalk com ...
is running.
talk > help
Commands:
help [command...] Provides help for a given command.
exit Exits application.
run [command] [args] Run the given [command], with optional JSON formatted [args] (see. examples)
examples Show command examples
Tip: To be able to connect remotely, run: flowAnalyzerTalk com -p /dev/ttyUSB1 -l 0.0.0.0:9876