@drivetech/cellocator-parser
v2.2.10
Published
Parse raw data from cellocator devices
Downloads
8
Readme
cellocator-parser
Parse raw data from cellocator devices
Installation
npm i -S @drivetech/cellocator-parser
Use
const cellocator = require('@drivetech/cellocator-parser');
const raw = new Buffer('4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1', 'hex');
const data = cellocator.parse(raw);
/*{
raw: '4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1',
unitId: 776893,
imei: 0,
manufacturer: 'cellocator',
device: 'CelloTrack',
alarm: {type: 'ConnectionUp'},
type: 'data',
loc: {
type: 'Point',
coordinates: [ -79.09097658351084, -7.953307941260071 ]
},
speed: 84.96,
datetime: '2016-03-12T23:42:00.000Z',
gpsTime: '2016-07-12T23:42:00.000Z',
direction: 155.09967514191385,
satellites: 9,
voltage: {
ada: 28.1176470588165,
adb: 4.00235293989,
adc: 45.41720000000001,
add: 182
},
altitude: 223.23000000000002,
status: {
sos: false,
input: {
'1': false,
'2': false,
'3': false,
'4': false,
'5': true
},
output: {
'1': false,
'2': false,
'3': false,
'4': false,
'5': false,
'6': false
},
charge: false,
engine: false,
driving: false,
accelerometer: true,
gpsPower: false
},
communication: {
noHibernation: false,
momentarySpeed: false,
privateMode: false,
firmwareSubversion: '0011',
canOriginatedOdometer: false,
canOriginatedSpeed: false,
dataType33_38: '0',
messageSource: '0',
garminConnected: false,
garminEnable: false,
messageInitiative: false
},
locationStatus: {
GNSSAntennaSelected: 'internal',
trailer: false,
CFEType: 'Not Applicable'
},
hardware: {
id: 31,
model: 'Cello-IQ',
modem: 'Telit GE864, automative'
},
software: 32,
protocol: 4,
transmissionReason: 32,
transmissionReasonSpecificData: 0,
odometer: 148770,
gpsModes: {
'1': {
pMode: '>3 satellite solution',
tpMode: 'Full power position',
altMode: 'No altitude hold',
dopMask: 'DOP mask not exceeded',
dgps: 'No DGPS position'
},
'2': 'Validated'
},
plmn: 71610,
serialId: 13,
messageType: 0,
valid: true
}*/
const data = {
unitId: 836522,
commandNumerator: 1,
instruction: '1_on' // enable output 1 => port + _ + on/off
};
const command = cellocator.parseCommand(data);
// new Buffer('4d43475000aac30c0001000000000003000300140014000000000000a8', 'hex')