@actualwave/tree-walker
v1.0.7
Published
Wireframe based on ES6 Proxies for making tree traversing APIs.
Downloads
20
Readme
TreeWalker
This is wireframe based on ES6 Proxies for making tree traversing APIs. You may check ready to use implementation DOMWalker for better understanding. Inspired by E4X(ECMAScript for XML) and its ActionScript 3 implementation(R.I.P.).
Demo
- Using with Object Children Adapter: TreeWalker Object Tree Demo.
- Using with Denormalize Adapter: TreeWalker Normalized Tree Demo
- Using with Browser DOM Adapter: TreeWalker BrowserDOM Tree Demo
Table of Contents
Installation
Via NPM
npm install @actualwave/tree-walker --save
Or Yarn
yarn add @actualwave/tree-walker
After importing TreeWalker, it needs to be configured to specify default adapter and augmentations, prefixes.
Without any configurations you will be able to access child nodes
const root = create(souceData);
const myDescendants = root.child.otherChild.descendant;
but no methods can be called on them except
- valueOf() -- to return raw data(source node)
- toString() -- to call
toString()
method on source node
How it works
To start working with source data tree, it should be wrapped into a Proxy wrapper object usingcreate()
function. But wrapper does not work with source data directly, all communication with source data is done via adapter
object which should implement specific API.
So we pass source data and adapter object which knows how to work with this data to create()
function.
const root = create(souceData, myAdapter);
When requesting any field/property/index from Proxy wrapper, it does not return values of corresponding properties of the source node, but tries to get children nodes of same name or index.
/*
this does not request property "child" of "souceData"
it will look for all chidren nodes with name "child"
*/
const child = root.child;
/*
this will look for fifth child node with name "child"
*/
const fifth = root.child[5];
Wrapper will access children nodes with getChildren()
and getChildrenByName()
methods of adapter object.
const root = create(mySourceTreeData, myAdapter);
const myDescendants = root.child.otherChild.descendant;
const myThirdChild = root.child[2];
const jerries = myDescendants.jerry;
With this code, on line 1, Proxy object for root node of the source tree is created. On line 2 additional Proxies are created for child
, otherChild
and proxy for descendant
nodes is stored in myDescendants
.
When requesting a child node by name, it returns not one node but a list of all child nodes with same name, but when children requested from the list(like otherChild
from child
or descendant
from otherChild
or jerry
from myDescendants
), Proxy will take first node from this list and return its children.
So, if you have a list of 2 nodes where first does not have children
const root = <source data>;
/**
node structure
root
/ \
one[0] one[1]
/ \
two[0] two[1]
*/
const rootProxy = create(root, myAdapter);
const twoProxy = rootProxy.one.two;
twoProxy
will contain empty list, because only first one
node is checked for children.
Here are equivalent code
const rootProxy = create(root, myAdapter);
const twoProxy = rootProxy.one[0].two;
To retrieve children from second one
node you should specify it, like this
const rootProxy = create(root, myAdapter);
const twoProxy = rootProxy.one[1].two;
Now we will have two two
nodes in twoProxy
.
Adapter should always return empty list if no nodes found
const rootProxy = create(root, myAdapter);
const veryDeepNode = rootProxy.one.five.seven.anyOther.dont.know.if.it.exists;
in this way you can request any descendants from any depth without worrying about their existence.
Usage
To use TreeWalker, it should be supplied with two required components:
Source data - Tree data structure, that you want to work with
Adapter - Provides standardized API to work with source data
Additionally augmentations and prefixes could be used to enrich final API.
Before using, TreeWalker must be created via factory function create()
, it returns source data wrapped into a Proxy wrapper(just "wrapper" in text below) which will use adapter to get children nodes, call augmentations and apply prefixes. TreeWrapper is read-only tree traverser, so it has only get
, has
and apply
traps, set
or deleteProperty
are not implemented. But you may create an augmentation for source data mutations(explained below).
import { create } from '@actualwave/tree-walker';
// root is a wrapped "source" node
const root = create(source, myAdapter);
After instantiating, you can access child nodes as properties and augmentations as methods. Its possible to have methods and nodes of same name, because, when wrapper is created for child object, it stores parent node and name of child node.
If property is requested from wrapper, it will return new wrapper with that node and name of the property:
// stores { target: node, name: "parent" }
const parent = node.parent;
// stores { target: parent, name: "otherChild" }
const child = parent.otherChild;
// stores { target: child, name: "sibblings" }
const sibblings = child.sibblings;
or
// stores { target: otherChild, name: "sibblings" }
const sibblings = node.parent.otherChild.sibblings;
If sibblings
node from example above will be replaced in a source tree or removed, your wrapper object will reflect changes.
When requesting a child, wrapper uses getChildren()
and getChildrenByName()
methods of adapter, so its always a list of nodes, even if single child available -- it will be a list with one child.
const firstSibbling = sibblings[0];
When requesting a child from wrapped list of nodes, wrapper will request children of first node from the list.
Adapter methods
toList()
,getChildren()
andgetChildrenByName()
must always return list of nodes. In case of 0 nodes it should be empty list. Single node must have length 1 and, if requested, index 0 must return same node.
If you wish to have specific node in a wrapper, you can request it by specifying index:
// stores { target: otherChild }
const sibblings = node.parent.otherChild[0];
In this case wrapper will contain one node resolved by name.
If wrapper is being called as function, it will look for augmentation registered for that name:
// stores { target: node, name: "parent" }
const parent = node.parent;
// will call augmentation
console.log(parent());
or
// will call augmentation "descendants" on "otherChild" node
console.log(node.child.otherChild.descendants());
Important to say, that wrapper has set of restricted names for child nodes constructor prototype Values of these properties will be requested directly from source node or list and returned as is.
API
create(rootNode, adapter) -- create wrapper for node and use supplied adapter to work with it
setDefaultAdapter(adapter) -- specifying default adapter makes optional defining adapter in
create()
factory functiongetDefaultAdapter(adapter) -- get default adapter
addAugmentations({...}) -- add augmentations to the pool, accepts an object with functions, name of the property will be used as name of augmentation.
addAugmentations({
children: (node, adapter, utils) => {...},
parent: (node, adapter, utils) => {...},
name: (node, adapter, utils) => {...},
});
hasAugmentation(name) -- check if augmentation was added
resetAugmentations({...}) -- remove all currently registered augmentations(including core augmentations) and, replace them with augmentations if passed
setNamePrefix(char, handlerFunc) -- set prefix handler
isValidPrefix(char) -- check if prefix is valid and has handler registered
Adapter
Adapter is an object with set of methods required by wrapper and augmentations to work with source data. Each instance of wrapper and augmentation calls receive instance of adapter as well as target node or list of nodes to pass into adapter. All calls to source data should be done via adapter API.
Adapter API(required methods marked with bold)
validateRoot(item) -- is called before crating wrapper for root node, could accept anything and must return root node.
isList(item) -- check if item is a list
toList(item) -- convert anything to list, node to list with one item or nothing to empty list
getLength(item) -- returns length of the item, in case of node it should be 1
getNodeAt(item, index = 0) -- return node from a list by its index
isNode(item) -- check if item is single node
toNode(item) -- convert anything to node, if possible. If list, get first node from it
getName(item) -- return name of the node
hasChild(item, name) -- check if node has children with specified name
getChildren(item) -- get list of all children from node
getChildrenByName(item, name) -- get list of children with specified name
getChildAt: (item, index = 0) -- get child of the node by index
getNodeParent(item) -- get node parent
getNodeRoot(item) -- get root node of the tree
value(item) -- get source value behind the wrapper
string(item) -- get string representation of source value .
All methods should work equally with lists and nodes, if it requires node but was supplied with list, it should get first node from the list and continue and vice versa -- if list is required but node supplied, convert it to list with one node and proceed.
You are free to add any methods or properties to adapter for your custom augmentations, but its not recommended to change signature of described here methods.
Augmentations
Augmentations are simple functions which receive set of arguments and result with any kind of data(not limited to nodes). Augmentations work only when called as function, otherwise it's treated as wrapped node:
// add "children" augmentation
addAugmentations({
children: (node, adapter, [childName], utils) => {
let list;
if (childName) {
list = adapter.getChildrenByName(node, childName);
} else {
list = adapter.getChildren(node);
}
return utils.wrap(list, adapter);
},
}};
// now augmentation may be called from any wrapped node
const root = create(source, myAdapter);
// list of "children" nodes
const children1 = root.children;
// result of "children" augmentation call
const children2 = root.children();
When wrapper received a function call, it checks for available augmentations and if its available, its being called. In other cases it will act as node list retrieved by name, so this will work too.
// result of "children" augmentation call
const children2 = children1();
Because wrapper in children1
have stored its parent root
node and children
name.
TreeWalker supplied with set of basic augmentations:
coreAugmentations
There are only two augmentations toString()
and valueOf()
, they are pre-applied.
valueOf():any -- If adapter has
value()
method, it will be called, otherwise unwrap source node or list of nodes and return ittoString():String -- If adapter has
string()
method, it will be called, otherwise calltoString()
method on source node
nodeAugmentations
Set of augmentations to work with nodes and their children.
children(name:String?):WrappedNode[] - List of all children nodes, if name is supplied, list will be filtered by name.
descendants(name:String?):WrappedNode[] - List of all descendant nodes, if name is supplied, list will be filtered by name.
childAt (index:Number=0):WrappedNode - Child node at index
root():WrappedNode - Root node of the tree
parent():WrappedNode - Parent node
listAugmentations
Set of augmentations to work with lists.
length():Number - Length of the list, will return 1 for single wrapped node
at(index:Number=0):WrappedNode - Get item from list by index, can be called on single node as on list with one item
first():WrappedNode - Get first item from the list, can be called in single node, will return itself
filter(handler:Function):WrappedNode[] - Filter list of nodes, will return filtered list
map(handler:Function):any[] - Map list of nodes, will return list with map results for each node
reduce(handler:Function, initialValue:any?):any - Reduce list of nodes will return final value
Prefixes
Prefix is always a one symbol string, any character. It maps a function which will be called when property is requested(get
Proxy trap).
To access properties of this object we can use prefixes, so we register a special handler function which wil be called when we request a property from data
object:
const dataPrefixGetHandler = (target, adapter, [name]) => {
const node = adapter.toNode(target);
return node.data ? node.data[name] : undefined;
};
setNamePrefix("$", dataPrefixGetHandler);
Handler receives source node, adapter, list of arguments in case of function call and utils object which contains method to wrap with Proxy.
After registering this prefix, we may access node properties stored in data
like this
const root = create(source, myAdapter);
console.log(root.$prop1); // will request "prop1" from "data" object
console.log(root.child.$prop1); // will request "prop1" from "data" object of "child" node
For example, let's imagine that every node in our tree has some data
object which holds additional properties of the node. But data object may have properties with same name as children nodes:
// node object structure
const source = {
name: 'node',
data: {
prop1: true,
prop2: 'my value',
},
children: [
{ name: 'prop1', data: {} },
{ name: 'prop2', data: {} },
],
};
The solution to access data
properties is to prefix every data property with special symbol -- you don't need to rename every data
property, just add prefix when requesting it through wrapper.
// register prefix
setNamePrefix("$", dataPrefixGetHandler);
// access data
console.log(wrappedNode.$prop1); // true
console.log(wrappedNode.$prop2); // "my value"
By using one handler you receive read-only access to prefixed properties, to extend control, additionally to get
handler you may also register handlers to has
, set
and depeteProperty
Proxy traps.
const dataPrefixGetHandler = (target, adapter, [name]) => {
const node = adapter.toNode(target);
return node.data ? node.data[name] : undefined;
};
const dataPrefixHasHandler = (target, adapter, [name]) => {
const node = adapter.toNode(target);
return node.data ? node.data.hasOwnProperty(name) : false;
};
const dataPrefixSetHandler = (target, adapter, [name, value]) => {
const node = adapter.toNode(target);
if (!node.data) {
node.data = {};
}
node.data[name] = value;
return true;
};
const dataPrefixDeleteHandler = (target, adapter, [name]) => {
const node = adapter.toNode(target);
return node.data ? delete node.data[name] : false;
};
setNamePrefix('$', {
get: dataPrefixGetHandler,
has: dataPrefixHasHandler,
set: dataPrefixSetHandler,
deleteProperty: dataPrefixDeleteHandler,
});
For additional example of prefix utilization, check js-dom-walker
project, it uses $
as prefix for DOM node attributes.