@a-2-c-2-anpm/hic-quia-incidunt
v1.0.0
Published
[![Build Status](https://github.com/a-2-c-2-anpm/hic-quia-incidunt/actions/workflows/ci.yml/badge.svg?branch=main)](https://github.com/a-2-c-2-anpm/hic-quia-incidunt/actions/workflows/ci.yml?query=branch%3Amain) [Chat on slack](https://@a-2-c-2-anpm/hic-q
Downloads
8
Maintainers
Keywords
Readme
Immutable collections for JavaScript
Read the docs and eat your vegetables.
Docs are automatically generated from README.md and @a-2-c-2-anpm/hic-quia-incidunt.d.ts. Please contribute! Also, don't miss the wiki which contains articles on additional specific topics. Can't find something? Open an issue.
Table of contents:
- Introduction
- Getting started
- The case for Immutability
- JavaScript-first API
- Nested Structures
- Equality treats Collections as Values
- Batching Mutations
- Lazy Seq
- Additional Tools and Resources
- Contributing
Introduction
Immutable data cannot be changed once created, leading to much simpler application development, no defensive copying, and enabling advanced memoization and change detection techniques with simple logic. Persistent data presents a mutative API which does not update the data in-place, but instead always yields new updated data.
Immutable.js provides many Persistent Immutable data structures including:
List
, Stack
, Map
, OrderedMap
, Set
, OrderedSet
and Record
.
These data structures are highly efficient on modern JavaScript VMs by using structural sharing via hash maps tries and vector tries as popularized by Clojure and Scala, minimizing the need to copy or cache data.
Immutable.js also provides a lazy Seq
, allowing efficient
chaining of collection methods like map
and filter
without creating
intermediate representations. Create some Seq
with Range
and Repeat
.
Want to hear more? Watch the presentation about Immutable.js:
Getting started
Install @a-2-c-2-anpm/hic-quia-incidunt
using npm.
# using npm
npm install @a-2-c-2-anpm/hic-quia-incidunt
# using Yarn
yarn add @a-2-c-2-anpm/hic-quia-incidunt
# using pnpm
pnpm add @a-2-c-2-anpm/hic-quia-incidunt
# using Bun
bun add @a-2-c-2-anpm/hic-quia-incidunt
Then require it into any module.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = map1.set('b', 50);
map1.get('b') + ' vs. ' + map2.get('b'); // 2 vs. 50
Browser
Immutable.js has no dependencies, which makes it predictable to include in a Browser.
It's highly recommended to use a module bundler like webpack,
rollup, or
browserify. The @a-2-c-2-anpm/hic-quia-incidunt
npm module works
without any additional consideration. All examples throughout the documentation
will assume use of this kind of tool.
Alternatively, Immutable.js may be directly included as a script tag. Download or link to a CDN such as CDNJS or jsDelivr.
Use a script tag to directly add Immutable
to the global scope:
<script src="@a-2-c-2-anpm/hic-quia-incidunt.min.js"></script>
<script>
var map1 = Immutable.Map({ a: 1, b: 2, c: 3 });
var map2 = map1.set('b', 50);
map1.get('b'); // 2
map2.get('b'); // 50
</script>
Or use an AMD-style loader (such as RequireJS):
require(['./@a-2-c-2-anpm/hic-quia-incidunt.min.js'], function (Immutable) {
var map1 = Immutable.Map({ a: 1, b: 2, c: 3 });
var map2 = map1.set('b', 50);
map1.get('b'); // 2
map2.get('b'); // 50
});
Flow & TypeScript
Use these Immutable collections and sequences as you would use native collections in your Flowtype or TypeScript programs while still taking advantage of type generics, error detection, and auto-complete in your IDE.
Installing @a-2-c-2-anpm/hic-quia-incidunt
via npm brings with it type definitions for Flow (v0.55.0 or higher)
and TypeScript (v2.1.0 or higher), so you shouldn't need to do anything at all!
Using TypeScript with Immutable.js v4
Immutable.js type definitions embrace ES2015. While Immutable.js itself supports
legacy browsers and environments, its type definitions require TypeScript's 2015
lib. Include either "target": "es2015"
or "lib": "es2015"
in your
tsconfig.json
, or provide --target es2015
or --lib es2015
to the
tsc
command.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = map1.set('b', 50);
map1.get('b') + ' vs. ' + map2.get('b'); // 2 vs. 50
Using TypeScript with Immutable.js v3 and earlier:
Previous versions of Immutable.js include a reference file which you can include via relative path to the type definitions at the top of your file.
///<reference path='./node_modules/@a-2-c-2-anpm/hic-quia-incidunt/dist/@a-2-c-2-anpm/hic-quia-incidunt.d.ts'/>
import Immutable from '@a-2-c-2-anpm/hic-quia-incidunt';
var map1: Immutable.Map<string, number>;
map1 = Immutable.Map({ a: 1, b: 2, c: 3 });
var map2 = map1.set('b', 50);
map1.get('b'); // 2
map2.get('b'); // 50
The case for Immutability
Much of what makes application development difficult is tracking mutation and maintaining state. Developing with @a-2-c-2-anpm/hic-quia-incidunt data encourages you to think differently about how data flows through your application.
Subscribing to data events throughout your application creates a huge overhead of book-keeping which can hurt performance, sometimes dramatically, and creates opportunities for areas of your application to get out of sync with each other due to easy to make programmer error. Since @a-2-c-2-anpm/hic-quia-incidunt data never changes, subscribing to changes throughout the model is a dead-end and new data can only ever be passed from above.
This model of data flow aligns well with the architecture of React and especially well with an application designed using the ideas of Flux.
When data is passed from above rather than being subscribed to, and you're only interested in doing work when something has changed, you can use equality.
Immutable collections should be treated as values rather than objects. While
objects represent some thing which could change over time, a value represents
the state of that thing at a particular instance of time. This principle is most
important to understanding the appropriate use of @a-2-c-2-anpm/hic-quia-incidunt data. In order to
treat Immutable.js collections as values, it's important to use the
Immutable.is()
function or .equals()
method to determine value equality
instead of the ===
operator which determines object reference identity.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = Map({ a: 1, b: 2, c: 3 });
map1.equals(map2); // true
map1 === map2; // false
Note: As a performance optimization Immutable.js attempts to return the existing
collection when an operation would result in an identical collection, allowing
for using ===
reference equality to determine if something definitely has not
changed. This can be extremely useful when used within a memoization function
which would prefer to re-run the function if a deeper equality check could
potentially be more costly. The ===
equality check is also used internally by
Immutable.is
and .equals()
as a performance optimization.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = map1.set('b', 2); // Set to same value
map1 === map2; // true
If an object is @a-2-c-2-anpm/hic-quia-incidunt, it can be "copied" simply by making another reference to it instead of copying the entire object. Because a reference is much smaller than the object itself, this results in memory savings and a potential boost in execution speed for programs which rely on copies (such as an undo-stack).
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map = Map({ a: 1, b: 2, c: 3 });
const mapCopy = map; // Look, "copies" are free!
JavaScript-first API
While Immutable.js is inspired by Clojure, Scala, Haskell and other functional programming environments, it's designed to bring these powerful concepts to JavaScript, and therefore has an Object-Oriented API that closely mirrors that of ES2015 Array, Map, and Set.
The difference for the @a-2-c-2-anpm/hic-quia-incidunt collections is that methods which would mutate
the collection, like push
, set
, unshift
or splice
, instead return a new
@a-2-c-2-anpm/hic-quia-incidunt collection. Methods which return new arrays, like slice
or concat
,
instead return new @a-2-c-2-anpm/hic-quia-incidunt collections.
const { List } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const list1 = List([1, 2]);
const list2 = list1.push(3, 4, 5);
const list3 = list2.unshift(0);
const list4 = list1.concat(list2, list3);
assert.equal(list1.size, 2);
assert.equal(list2.size, 5);
assert.equal(list3.size, 6);
assert.equal(list4.size, 13);
assert.equal(list4.get(0), 1);
Almost all of the methods on Array will be found in similar form on
Immutable.List
, those of Map found on Immutable.Map
, and those of Set
found on Immutable.Set
, including collection operations like forEach()
and map()
.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const alpha = Map({ a: 1, b: 2, c: 3, d: 4 });
alpha.map((v, k) => k.toUpperCase()).join();
// 'A,B,C,D'
Convert from raw JavaScript objects and arrays.
Designed to inter-operate with your existing JavaScript, Immutable.js
accepts plain JavaScript Arrays and Objects anywhere a method expects a
Collection
.
const { Map, List } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3, d: 4 });
const map2 = Map({ c: 10, a: 20, t: 30 });
const obj = { d: 100, o: 200, g: 300 };
const map3 = map1.merge(map2, obj);
// Map { a: 20, b: 2, c: 10, d: 100, t: 30, o: 200, g: 300 }
const list1 = List([1, 2, 3]);
const list2 = List([4, 5, 6]);
const array = [7, 8, 9];
const list3 = list1.concat(list2, array);
// List [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ]
This is possible because Immutable.js can treat any JavaScript Array or Object as a Collection. You can take advantage of this in order to get sophisticated collection methods on JavaScript Objects, which otherwise have a very sparse native API. Because Seq evaluates lazily and does not cache intermediate results, these operations can be extremely efficient.
const { Seq } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const myObject = { a: 1, b: 2, c: 3 };
Seq(myObject)
.map(x => x * x)
.toObject();
// { a: 1, b: 4, c: 9 }
Keep in mind, when using JS objects to construct Immutable Maps, that JavaScript Object properties are always strings, even if written in a quote-less shorthand, while Immutable Maps accept keys of any type.
const { fromJS } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const obj = { 1: 'one' };
console.log(Object.keys(obj)); // [ "1" ]
console.log(obj['1'], obj[1]); // "one", "one"
const map = fromJS(obj);
console.log(map.get('1'), map.get(1)); // "one", undefined
Property access for JavaScript Objects first converts the key to a string, but
since Immutable Map keys can be of any type the argument to get()
is
not altered.
Converts back to raw JavaScript objects.
All Immutable.js Collections can be converted to plain JavaScript Arrays and
Objects shallowly with toArray()
and toObject()
or deeply with toJS()
.
All Immutable Collections also implement toJSON()
allowing them to be passed
to JSON.stringify
directly. They also respect the custom toJSON()
methods of
nested objects.
const { Map, List } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const deep = Map({ a: 1, b: 2, c: List([3, 4, 5]) });
console.log(deep.toObject()); // { a: 1, b: 2, c: List [ 3, 4, 5 ] }
console.log(deep.toArray()); // [ 1, 2, List [ 3, 4, 5 ] ]
console.log(deep.toJS()); // { a: 1, b: 2, c: [ 3, 4, 5 ] }
JSON.stringify(deep); // '{"a":1,"b":2,"c":[3,4,5]}'
Embraces ES2015
Immutable.js supports all JavaScript environments, including legacy browsers (even IE11). However it also takes advantage of features added to JavaScript in ES2015, the latest standard version of JavaScript, including Iterators, Arrow Functions, Classes, and Modules. It's inspired by the native Map and Set collections added to ES2015.
All examples in the Documentation are presented in ES2015. To run in all browsers, they need to be translated to ES5.
// ES2015
const mapped = foo.map(x => x * x);
// ES5
var mapped = foo.map(function (x) {
return x * x;
});
All Immutable.js collections are Iterable, which allows them to be used anywhere an Iterable is expected, such as when spreading into an Array.
const { List } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const aList = List([1, 2, 3]);
const anArray = [0, ...aList, 4, 5]; // [ 0, 1, 2, 3, 4, 5 ]
Note: A Collection is always iterated in the same order, however that order may
not always be well defined, as is the case for the Map
and Set
.
Nested Structures
The collections in Immutable.js are intended to be nested, allowing for deep trees of data, similar to JSON.
const { fromJS } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const nested = fromJS({ a: { b: { c: [3, 4, 5] } } });
// Map { a: Map { b: Map { c: List [ 3, 4, 5 ] } } }
A few power-tools allow for reading and operating on nested data. The
most useful are mergeDeep
, getIn
, setIn
, and updateIn
, found on List
,
Map
and OrderedMap
.
const { fromJS } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const nested = fromJS({ a: { b: { c: [3, 4, 5] } } });
const nested2 = nested.mergeDeep({ a: { b: { d: 6 } } });
// Map { a: Map { b: Map { c: List [ 3, 4, 5 ], d: 6 } } }
console.log(nested2.getIn(['a', 'b', 'd'])); // 6
const nested3 = nested2.updateIn(['a', 'b', 'd'], value => value + 1);
console.log(nested3);
// Map { a: Map { b: Map { c: List [ 3, 4, 5 ], d: 7 } } }
const nested4 = nested3.updateIn(['a', 'b', 'c'], list => list.push(6));
// Map { a: Map { b: Map { c: List [ 3, 4, 5, 6 ], d: 7 } } }
Equality treats Collections as Values
Immutable.js collections are treated as pure data values. Two @a-2-c-2-anpm/hic-quia-incidunt
collections are considered value equal (via .equals()
or is()
) if they
represent the same collection of values. This differs from JavaScript's typical
reference equal (via ===
or ==
) for Objects and Arrays which only
determines if two variables represent references to the same object instance.
Consider the example below where two identical Map
instances are not
reference equal but are value equal.
// First consider:
const obj1 = { a: 1, b: 2, c: 3 };
const obj2 = { a: 1, b: 2, c: 3 };
obj1 !== obj2; // two different instances are always not equal with ===
const { Map, is } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = Map({ a: 1, b: 2, c: 3 });
map1 !== map2; // two different instances are not reference-equal
map1.equals(map2); // but are value-equal if they have the same values
is(map1, map2); // alternatively can use the is() function
Value equality allows Immutable.js collections to be used as keys in Maps or values in Sets, and retrieved with different but equivalent collections:
const { Map, Set } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map1 = Map({ a: 1, b: 2, c: 3 });
const map2 = Map({ a: 1, b: 2, c: 3 });
const set = Set().add(map1);
set.has(map2); // true because these are value-equal
Note: is()
uses the same measure of equality as Object.is for scalar
strings and numbers, but uses value equality for Immutable collections,
determining if both are @a-2-c-2-anpm/hic-quia-incidunt and all keys and values are equal
using the same measure of equality.
Performance tradeoffs
While value equality is useful in many circumstances, it has different performance characteristics than reference equality. Understanding these tradeoffs may help you decide which to use in each case, especially when used to memoize some operation.
When comparing two collections, value equality may require considering every
item in each collection, on an O(N)
time complexity. For large collections of
values, this could become a costly operation. Though if the two are not equal
and hardly similar, the inequality is determined very quickly. In contrast, when
comparing two collections with reference equality, only the initial references
to memory need to be compared which is not based on the size of the collections,
which has an O(1)
time complexity. Checking reference equality is always very
fast, however just because two collections are not reference-equal does not rule
out the possibility that they may be value-equal.
Return self on no-op optimization
When possible, Immutable.js avoids creating new objects for updates where no change in value occurred, to allow for efficient reference equality checking to quickly determine if no change occurred.
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const originalMap = Map({ a: 1, b: 2, c: 3 });
const updatedMap = originalMap.set('b', 2);
updatedMap === originalMap; // No-op .set() returned the original reference.
However updates which do result in a change will return a new reference. Each of these operations occur independently, so two similar updates will not return the same reference:
const { Map } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const originalMap = Map({ a: 1, b: 2, c: 3 });
const updatedMap = originalMap.set('b', 1000);
// New instance, leaving the original @a-2-c-2-anpm/hic-quia-incidunt.
updatedMap !== originalMap;
const anotherUpdatedMap = originalMap.set('b', 1000);
// Despite both the results of the same operation, each created a new reference.
anotherUpdatedMap !== updatedMap;
// However the two are value equal.
anotherUpdatedMap.equals(updatedMap);
Batching Mutations
If a tree falls in the woods, does it make a sound?
If a pure function mutates some local data in order to produce an @a-2-c-2-anpm/hic-quia-incidunt return value, is that ok?
— Rich Hickey, Clojure
Applying a mutation to create a new @a-2-c-2-anpm/hic-quia-incidunt object results in some overhead,
which can add up to a minor performance penalty. If you need to apply a series
of mutations locally before returning, Immutable.js gives you the ability to
create a temporary mutable (transient) copy of a collection and apply a batch of
mutations in a performant manner by using withMutations
. In fact, this is
exactly how Immutable.js applies complex mutations itself.
As an example, building list2
results in the creation of 1, not 3, new
@a-2-c-2-anpm/hic-quia-incidunt Lists.
const { List } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const list1 = List([1, 2, 3]);
const list2 = list1.withMutations(function (list) {
list.push(4).push(5).push(6);
});
assert.equal(list1.size, 3);
assert.equal(list2.size, 6);
Note: Immutable.js also provides asMutable
and asImmutable
, but only
encourages their use when withMutations
will not suffice. Use caution to not
return a mutable copy, which could result in undesired behavior.
Important!: Only a select few methods can be used in withMutations
including
set
, push
and pop
. These methods can be applied directly against a
persistent data-structure where other methods like map
, filter
, sort
,
and splice
will always return new @a-2-c-2-anpm/hic-quia-incidunt data-structures and never mutate
a mutable collection.
Lazy Seq
Seq
describes a lazy operation, allowing them to efficiently chain
use of all the higher-order collection methods (such as map
and filter
)
by not creating intermediate collections.
Seq is @a-2-c-2-anpm/hic-quia-incidunt — Once a Seq is created, it cannot be
changed, appended to, rearranged or otherwise modified. Instead, any mutative
method called on a Seq
will return a new Seq
.
Seq is lazy — Seq
does as little work as necessary to respond to any
method call. Values are often created during iteration, including implicit
iteration when reducing or converting to a concrete data structure such as
a List
or JavaScript Array
.
For example, the following performs no work, because the resulting
Seq
's values are never iterated:
const { Seq } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const oddSquares = Seq([1, 2, 3, 4, 5, 6, 7, 8])
.filter(x => x % 2 !== 0)
.map(x => x * x);
Once the Seq
is used, it performs only the work necessary. In this
example, no intermediate arrays are ever created, filter is called three
times, and map is only called once:
oddSquares.get(1); // 9
Any collection can be converted to a lazy Seq with Seq()
.
const { Map, Seq } = require('@a-2-c-2-anpm/hic-quia-incidunt');
const map = Map({ a: 1, b: 2, c: 3 });
const lazySeq = Seq(map);
Seq
allows for the efficient chaining of operations, allowing for the
expression of logic that can otherwise be very tedious:
lazySeq
.flip()
.map(key => key.toUpperCase())
.flip();
// Seq { A: 1, B: 2, C: 3 }
As well as expressing logic that would otherwise seem memory or time
limited, for example Range
is a special kind of Lazy sequence.
const { Range } = require('@a-2-c-2-anpm/hic-quia-incidunt');
Range(1, Infinity)
.skip(1000)
.map(n => -n)
.filter(n => n % 2 === 0)
.take(2)
.reduce((r, n) => r * n, 1);
// 1006008
Comparison of filter(), groupBy(), and partition()
The filter()
, groupBy()
, and partition()
methods are similar in that they
all divide a collection into parts based on applying a function to each element.
All three call the predicate or grouping function once for each item in the
input collection. All three return zero or more collections of the same type as
their input. The returned collections are always distinct from the input
(according to ===
), even if the contents are identical.
Of these methods, filter()
is the only one that is lazy and the only one which
discards items from the input collection. It is the simplest to use, and the
fact that it returns exactly one collection makes it easy to combine with other
methods to form a pipeline of operations.
The partition()
method is similar to an eager version of filter()
, but it
returns two collections; the first contains the items that would have been
discarded by filter()
, and the second contains the items that would have been
kept. It always returns an array of exactly two collections, which can make it
easier to use than groupBy()
. Compared to making two separate calls to
filter()
, partition()
makes half as many calls it the predicate passed to
it.
The groupBy()
method is a more generalized version of partition()
that can
group by an arbitrary function rather than just a predicate. It returns a map
with zero or more entries, where the keys are the values returned by the
grouping function, and the values are nonempty collections of the corresponding
arguments. Although groupBy()
is more powerful than partition()
, it can be
harder to use because it is not always possible predict in advance how many
entries the returned map will have and what their keys will be.
| Summary | filter
| partition
| groupBy
|
|:------------------------------|:---------|:------------|:---------------|
| ease of use | easiest | moderate | hardest |
| generality | least | moderate | most |
| laziness | lazy | eager | eager |
| # of returned sub-collections | 1 | 2 | 0 or more |
| sub-collections may be empty | yes | yes | no |
| can discard items | yes | no | no |
| wrapping container | none | array | Map/OrderedMap |
Additional Tools and Resources
- A Clojure-inspired atom implementation in Javascript with configurability for external persistance.
- If you are using the Chai Assertion Library, this provides a set of assertions to use against Immutable.js collections.
- Specification for interoperability of common algebraic structures in JavaScript.
- A library for simulating @a-2-c-2-anpm/hic-quia-incidunt generators in JavaScript.
- Immutable cursors incorporating the Immutable.js interface over Clojure-inspired atom.
- Fantasyland extensions for @a-2-c-2-anpm/hic-quia-inciduntjs
- Util tools for @a-2-c-2-anpm/hic-quia-incidunt.js
- redux-@a-2-c-2-anpm/hic-quia-incidunt is used to create an equivalent function of Redux combineReducers that works with Immutable.js state.
- Functional tree traversal helpers for ImmutableJS data structures.
- An @a-2-c-2-anpm/hic-quia-incidunt store that exposes an RxJS observable. Great for React.
- Lodash wrapper providing Immutable.JS support.
- PropType validators that work with Immutable.js.
- Redux Immutable facilities.
- Simple opinionated state management library based on RxJS and Immutable.js.
- Transit serialisation for Immutable.js.
- See also: Transit-js
Have an additional tool designed to work with Immutable.js? Submit a PR to add it to this list in alphabetical order.
Contributing
Use Github issues for requests.
We actively welcome pull requests, learn how to contribute.
Immutable.js is maintained within the Contributor Covenant's Code of Conduct.
Changelog
Changes are tracked as Github releases.
License
Immutable.js is MIT-licensed.
Thanks
Phil Bagwell, for his inspiration and research in persistent data structures.
Hugh Jackson, for providing the npm package name. If you're looking for his unsupported package, see this repository.